EverFocus eNVP-JAX-AI-V0008 User manual

eNVP-JAX-AI-V0008
NVIDIA Jetson® AGX Xavier AI BOX
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: September 2022

E V E RF O CU S E L E CT R ON I C S C O RP O R AT I O N
eNVP-JAX-AI-V0008
NVIDIA Jetson® AGX Xavier AI BOX
User’s Manual
1995-2022 EverFocus Electronics Corp.
www.everfocus.com.tw
Disclaimer
All the images including product pictures or screen shots in this document are for example only. The
images may vary depending on the product and software version. Information contained in this document
is subject to change without notice.
Copyright
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form
or by any means without written permission of the EverFocus Electronics Corporation.
-NVIDIA, the NVIDIA logo, and Jetson are trademarks of the NVIDIA Corporation
-ITE is a trademark of Integrated Technology Express, Inc.
-IBM and VGA are trademarks of International Business Machines Corporation.
-Ubuntu is a registered trademark of Canonical
-All other product names or trademarks are properties of their respective owners.

ii
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this manual
for future references.
All cautions and warnings on the device should be noted.
All cables and adapters supplied by EverFocus are certified and in accordance with the
material safety laws and regulations of the country of sale. Do not use any cables or
adapters not supplied by EverFocus to prevent system malfunction or fires.
Make sure the power source matches the power rating of the device.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
Always completely disconnect the power before working on the system’s hardware.
No connections should be made when the system is powered as a sudden rush of power
may damage sensitive electronic components.
If the device is not to be used for a long time, disconnect it from the power supply to avoid
damage by transient over-voltage.
Always disconnect this device from any AC supply before cleaning.
While cleaning, use a damp cloth instead of liquid or spray detergents.
Make sure the device is installed near a power outlet and is easily accessible.
Keep this device away from humidity.
Place the device on a solid surface during installation to prevent falls.
Do not cover the openings on the device to ensure optimal heat dissipation.
Watch out for high temperatures when the system is running.
Do not touch the heat sink or heat spreader when the system is running.
Never pour any liquid into the openings. This could cause fire or electric shock.
As most electronic components are sensitive to static electrical charge, be sure to ground
yourself to prevent static charge when installing the internal components. Use a grounding
wrist strap and contain all electronic components in any static-shielded containers.
If any of the following situations arises, please contact our service personnel
-Damaged power cord or plug
-Liquid intrusion to the device
-Exposure to moisture
-Device is not working as expected or in a manner as described in this manual
-The device is dropped or damaged
-Any obvious signs of damage displayed on the device
DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH TEMPERATURES
BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES (SEE SPECIFICATION) TO
PREVENT DAMAGE.

iii
FCC Statement
This device complies with Part 15 FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received including
interference that may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions and your local government’s recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.

iv
TABLE OF CONTENTS
1. Introduction ............................................................................................................................ 1
1.1 Features .......................................................................................................................... 1
1.2 Dimensions...................................................................................................................... 2
1.3 Packing List...................................................................................................................... 2
1.4 Physical Description ........................................................................................................ 3
1.5 Carrier Board................................................................................................................... 5
2. Jumpers and Connectors on the Motherboard ...................................................................... 6
3. Specification.......................................................................................................................... 16

eNVP-JAX-AI-V0008
1
1. Introduction
EverFocus eNVP-JAX-AI-V0008 is a compact AI Box based on NVIDIA® Jetson AGX Xavier™,
designed for general and commercial markets. With 8-core NVIDIA Carmel Arm® 64-bit CPU and
various interfaces, this model aims to deliver high-quality performance for wider computing
applications. In addition, this AI Box also comes with EverFocus in-house designed software,
providing basic NVR functions of real-time live view, video recording/playback, alarm notifications
and etc.
1.1 Features
eNVP-JAX-AI-V0008
•Fanless AI edge embedded box PC
•8-core NVIDIA Carmel Arm®v8.2 64-bit CPU
•512 NVIDIA CUDA cores and 64 Tensor cores (VoltaTM architecture)
•Onboard 32/64 GB 256-bit LPDDR4x 136.5GB/s
•Supports PoE x 8, GbE x 2
•Supports M.2 M-key 2280 x 1 (for NVMe SSD)
•Supports M.2 B-key 3042/3052 x 1 (for 4G/5G module)1
•Supports M.2 E-key 2230 x 1 (for WiFi/BT module)
•Supports SATA x 2, SD Card x 1
•Supports CAN bus x 1, GPS x 1
•Supports RS232 x 2 (SKU1) / RS232 x1, RS485 x 1 (SKU2)
•Supports Alarm In x 8, Alarm Out x 8
•Supports 9V to 36V wide-range DC input
Refer to Chapter 3 Specification for more detail.
1Please note that 4G or 5G cannot co-exist while in use.
Chapter
1

eNVP-JAX-AI-V0008
2
1.2 Dimensions
1.3 Packing List
•AI BOX x 1
•Power Harness Cable x 1, SATA Cable x 2, Alarm I/O Cable x 2, RS485 Cable x 1
•Mounting Bracket x 2
•Screw Kit x 1:
-4 screws + 8 spacers (for mounting bracket)
-8 screws for SATA drive
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information.
2. If any item appears to have been damaged in the shipping process, please contact the
shipper. Please also keep the shipping carton for possible future use.

eNVP-JAX-AI-V0008
3
1.4 Physical Description
1.4.1. Front I/O Overview
123 4 5
6
No.
Name
Description
1
Button
PWR x 1
Indicator
LED x 4 (PWR/LAN/IGN/STR)2
2
USB
USB 2.0 x 2
3
Audio In/Out
Audio In/Out
4
OTG
MicroUSB (for Flash OS) x 1
5
PoE
PoE x 8
6
Protective Cover
Remove the cover to access the following slots & buttons:
SD CARD
SD Card x 1
SIM CARD
SIM Card x 1
Button
Force Recovery x 1, Reset x 1
2STR LED indicates the read/write status of all storage devices, except for certain SD Cards.

eNVP-JAX-AI-V0008
4
1.4.2. Rear I/O Overview
7 9 11
12
13 14 15 16 17
18
8
10
No.
Name
Description
7
Antenna
ANT.3 ~ ANT.5
8
RS485
RS485 x 1 (SKU2 only)
9
RJ45-2
RJ45/GbE x 1
10
Alarm In/Out
Alarm In x 8, Alarm Out x 8
11
HDMI
HDMI x 1
12
DisplayPort
DisplayPort x 1
13
USB 3.0
USB 3.0 x 2
14
CAN bus
CAN bus x 1
15
RJ45-1
RJ45/GbE x 1
16
PWR Input
Connecting to the power source. Refer to 2.2 Vehicle Connection.
17
Antenna
ANT.1 ~ ANT.2
18
RS232
RS232 x 2

eNVP-JAX-AI-V0008
5
1.5 Carrier Board
To access the carrier board, please unscrew the 6 screws on the cover.

eNVP-JAX-AI-V0008
6
2. Jumpers and Connectors on the Motherboard
Chapter
2

eNVP-JAX-AI-V0008
7
eNVP-JAX-AI-V0008
1
Power Input
26
Camera Power (optional)
2
RJ45 (optional)
27
Camera Power (optional, for MIPI)
3
RJ45-1/GbE
28
M.2 B-Key 3042/3052*
4
USB 3.0 x 2
29
SATA Power x 2
5
Video out (DisplayPort, HDMI)
30
Front Board Connector
6
Alarm I/O 1~4 (4-In, 4-Out)
31
Main Board Connector
7
RS232 Switch (1&2 on) or
RS485 Switch (3&4 on, SKU2 only)
32
Alarm I/O 5~8 (4-In, 4-Out)
8
SATA Port
33
RS485 (SKU2 only)
9
SATA Port
34
RJ45-2/GbE
10
VGA Port (optional)
35
Main Board Connector
11
IO Board Connector
36
PoE 5 ~ 8
12
--
37
PoE 1 ~ 4
13
CAN bus
38
SD Card
14
M.2 M-Key 2280
39
USB 2.0 x 2
15
M.2 E-Key 2230
40
LED x 4
16
Battery (RTC)
41
Power Switch
17
Mini PCIe*
42
Audio In
18
Reset
43
Audio Out
19
Power On
44
OS Flash Port
20
Force Recovery
45
Main Board Connector
21
M.2 B-Key Power Switch (3.3v/3.7)
46
PoE Board Connector
Power Auto ON
47
AGX SOM Connector
22
PCIe (optional)
48
Audio Board Connector
23
PCIe (optional)
49
HDD Heater Connector
24
MIPI (optional)
50
Fan Connector 1 (by SOM)
25
MIPI (optional)
51
Fan Connector 2 (by SOM)
* Note: Mini PCIe and M.2 B-Key 3042/3052 can only support one(1) LTE module while in use.

eNVP-JAX-AI-V0008
8
Power Input
Dry Contact
4-In, 4-Out
Power Input
Vin+
GND
ACC / X
Alarm In Alarm Out
1
2
G1
1
2
3
4
G2
3
4
PIN
Level
Alarm In 1
8~36V
Alarm In 2
8~36V
Alarm In 3
8~36V
Alarm In 4
8~36V
GND 1
--
GND 2
--
Alarm Out 1
8~36V
Alarm Out 2
8~36V
Alarm Out 3
8~36V
Alarm Out 4
8~36V
* Dry Contact: Dry-contact alarms, also known as passive-contact alarms, refer to volt-free alarms
that do not supply voltage. Not connected to circuitry, dry-contact alarms would operate as a
single on/off switch outside the major switch. In other words, the relay energizes or de-energizes
when a change to its voltage input has occurred. Refer to the “level”above for the input range of
this device.
1
6

eNVP-JAX-AI-V0008
9
Dry Contact
4-In, 4-Out
Alarm In Alarm Out
5
6
G1
5
6
7
8
G2
7
8
RS485
G1
G2
A
B
PIN
Level
Alarm In 5
8~36V
Alarm In 6
8~36V
Alarm In 7
8~36V
Alarm In 8
8~36V
GND 1
--
GND 2
--
Alarm Out 5
8~36V
Alarm Out 6
8~36V
Alarm Out 7
8~36V
Alarm Out 8
8~36V
PIN
Function
GND1
--
GND2
--
A
RS485+
B
RS485-
33
32

eNVP-JAX-AI-V0008
10
RS232 - 1
PIN No.
Function
Level
PIN 1
N.C
--
PIN 2
Received Data
±15V
PIN 3
Transmitted Data
±15V
PIN 4
N.C
--
PIN 5
Signal Ground
--
PIN 6
N.C
--
PIN 7
Request to Send
±15V
PIN 8
Clear to Send
±15V
PIN 9
N.C
--
RS232 - 2
PIN No.
Function
Level
PIN 1
N.C
--
PIN 2
Received Data
±15V
PIN 3
Transmitted Data
±15V
PIN 4
N.C
--
PIN 5
Signal Ground
--
PIN 6
N.C
--
PIN 7
Request to Send
±15V
PIN 8
Clear to Send
±15V
PIN 9
N.C
--
CAN
PIN No.
Function
Level
PIN 1
CAN bus 5V
5V Output
PIN 2
CAN_L
CAN bus CANL
PIN 3
CAN bus GND
CAN bus GND
PIN 4
N.C
--
PIN 5
N.V
--
PIN 6
CAN bus GND
CAN bus GND
PIN 7
CAN_H
CAN bus CANH
PIN 8
N.C
--
PIN 9
N.C
--

eNVP-JAX-AI-V0008
11
Label
PIN
PIN Name
Function
Level
J43
1
UART1_TXD_LS
UART1 to RS232 (1&2 on)
--
J43
2
UART1_RXD_LS
--
J43
3
UART1_TXD_LS
UART1 to RS485 (3&4 on)
--
J43
4
UART1_RXD_LS
--
Label
PIN
PIN Name
Function
Level
J20
1
VGA_VS_OUT
VGA port
--
J20
2
VGA_HS_OUT
VGA port
--
J20
3
VGA_B_OUT
VGA port
--
J20
4
VGA_G_OUT
VGA port
--
J20
5
VGA_R_OUT
VGA port
--
J20
6
GND
--
--
7
10
(This Function only for SKU2)

eNVP-JAX-AI-V0008
12
Label
PIN
PIN Name
Function
Level
J16
1
5V_CAN
CAN bus
--
J16
2
CAN1-H
CAN bus
--
J16
3
CAN1-L
CAN bus
--
J16
4
GND
CAN bus isolator GND
--
J16
5
GND
CAN bus isolator GND
--
J2
1
BAT+ Battery
Vin 3.3V
--
J2
2
GND
GND
--
Label
PIN
PIN Name
Function
Level
J26
1
3V3_STB
MCU debug port
--
J26
2
SWDIO
MCU debug port
--
J26
3
SWCLK
MCU debug port
--
J26
4
MCU NRST
MCU debug port
--
J26
5
GND
GND
--
13
16
29

eNVP-JAX-AI-V0008
13
Label
PIN
PIN Name (On/Off)
Function
Level
J23
1
SW_V3_V7
M.2 key B power 3V3 / 3V7
5V
J23
2
ACOK
SOM Auto power ON3
3.3V
Label
PIN
PIN Name
Function
Level
J6 / J7
1
12V
CAMERA power 12V
12V
J6 / J7
2
5V
CAMERA power 5V
5V
J6 / J7
3
GND
GND
--
J6 / J7
4
GND
GND
--
J6 / J7
5
CTRL_MIPI
MIPI Enable
3.3V
3J23-Pin 2 ACOK setting:
(1) Auto power ON (in-vehicle):
In connection with electricity, the device will be switched on automatically.
(2) Auto power OFF (desktop, by default):
In connection with electricity, the device will NOT be switched on. Press the PWR button to switch it on.
21
26

eNVP-JAX-AI-V0008
14
Label
PIN
PIN Name
Function
Level
J31
1
FAN_TACH
FAN_TACH_IN
12V
J31
2
12V Output
FAN_EN
12V
J31
3
GND
GND
--
Label
PIN
PIN Name
Function
Level
J22
1
FAN_TACH
FAN_TACH_IN
12V
J22
2
12V Output
FAN_EN
12V
J22
3
GND
GND
--
50
51

eNVP-JAX-AI-V0008
15
Label
PIN
PIN Name
Function
Level
J37
1
HEATER
HEATER POWER
CARPWR: 12 /24V
J37
2
GND
GND
--
49
Table of contents
Other EverFocus Industrial PC manuals
Popular Industrial PC manuals by other brands

Moxa Technologies
Moxa Technologies AIG-300 Series Hardware user manual

IBASE Technology
IBASE Technology ASB200-919 user manual

WIN Enterprises
WIN Enterprises PL-60590 user manual

Spectrum Digital
Spectrum Digital AppBox D21 user guide

ABB
ABB Control Cabinet PC C6240 Installation and operating instructions

Nexcom
Nexcom NISE 3800E-H110 user manual