Everpure Quad-MC EV9628-08 User manual

BENEFITS
APPLICATION/SIZING
INSTALLATION TIPS OPERATION TIPS
Quad-MC Cartridge Kit
Replacement cartridge kit for Everpure High Flow CSR Quad-MC
Systems
Quad-MC Replacement Cartridge Kit:
EV9628-08
Quad-MC Replacement Cartridge Kit:
EV9628-08
Convenient replacement cartridge kit contains all
necessary cartridges to service filters in specific
High Flow CSR Quad combination systems.
Kit includes (1) EC210 prefilter, (4) MC filter
cartridges, and (1) SS-IMF with spacer
Reduces chlorine taste and odor and other
offensive contaminants that can adversely affect
the taste of beverages
Precoat submicron technology reduces dirt and
particles as small as 1/2 micron in size
Reduces possible health contaminants such as
asbestos fibers and Cryptosporidium and Giardia
cysts
20" prefilter cartridge captures larger dirt particles
and extends the life of the MC cartridges
SS-IMF cartridge inhibits limescale buildup in
ice machines and coffee brewers.
MC cartridges are NSF Certified under NSF/
ANSI Standards 42 and 53. SS-IMFcartridge is
NSF component listed
Install vertically with cartridges hanging down
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
Flush cartridges by running water through system
for five minutes at full flow
Install SS-IMF cartridge in SR-X bowl
vertically with black o-band seal up
Change cartridges on a regular 6 month
preventative maintenance program
Change cartridges when capacity is reached or
when pressure falls below 10 psi
Change SS-10 cartridge before Hydroblend™
compound is completely used up
Replace EC210 cartridge when dirt has penetrated
through to the inner core of the cartridge
Always flush the filter cartridges at time of
installation and cartridge change
Replacement cartridge kit for Everpure High
Flow CSR Combination Systems
For foodservice applications
EV9628-08

Quad-MC Cartridge Kit
Overall Dimensions:
MC = 20”H x 4”W x 4”D ; EC210 = 20”H x
3.38” Diameter ; SS-IMF = 6-7/8”H x
1-5/16” Diameter
The SS-IMF Spacer (EV3114-69) may be used
to extend the height of the SS-IMF cartridge
by approximately 1-3/4" for a better fit into
longer bowls.
Service Flow Rate:
Maximum 6.7 gpm (25.4 Lpm)
Pressure Requirements:
10 psi -125 psi (0.7 – 8.6 bar), non-shock
Temperature:
35°F - 100°F (2-38°C)
The contaminants or other substances
removed or reduced by this drinking water
system are not necesssarily in your water. Do
not use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after the
system. Systems certified for cyst reduction
may be used with disinfected water that may
contain filterable cysts.
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.