Everpure Wrap ScaleStick EV9799-06 User manual

BENEFITS
APPLICATION/SIZING
INSTALLATION TIPS OPERATION TIPS
SSW-10 Wrap ScaleStick®
Inhibits mineral scale deposits and provides corrosion control in
water-fed equipment
SSW-10 Wrap ScaleStick:
EV9799-04
CWS-10 Carbon Block Filter Wrap:
EV9799-06
SWS-10 Sediment Filter Wrap:
EV9799-05
SSW-10 Wrap ScaleStick:
EV9799-04
CWS-10 Carbon Block Filter Wrap:
EV9799-06
SWS-10 Sediment Filter Wrap:
EV9799-05
Features Hydroblend™ compound, a unique
blend that inhibits mineral scale deposits and
provides corrosion protection in low flow water-
fed equipment
Patented design (patent no. 5,580,448) dispenses
a controlled amount of Hydroblend™ for long-
term protection and provides greater effectiveness
than standard phosphate treatments
Unaffected by high temperatures, permitting a
wide variety of applications
Integral feed cartridge fits most standard 10 inch
housings
Translucent cartridge allows simple visual
monitoring of product usage and ensures against
wasteful premature cartridge replacement
Wrap ScaleStick® (SSW-10) are specially
designed to be used with a sediment filter wrap
(SWS-10) or carbon block filter wrap
(CWS-10) to provide sediment filtration,
chlorine reduction and scale control in one
compact unit. They are designed to fit over and
around the Wrap ScaleStick® and are sold
separately
Housing not included. Order Model A-10 Clear
10” Housing (EV9100-01) separately for
temperatures less than 125°F
Make sure selected housing fits temperature/
pressure conditions
Install vertically with black o-band seal up
Wrap ScaleStick® cartridges are shorter than
standard ScaleStick® cartridges and do not have
the o-band seal. They cannot be installed without
the special filter wraps. Standard ScaleStick®
cartridges cannot be installed into filter wraps
Deliming of equipment prior to application is
recommended, but not required
Inspect ScaleStick® cartridges at least every 6
months
Replace ScaleStick® before Hydroblend™
compound is completely dissolved
Pre-existing equipment scale may come loose and
clog equipment. Remove any loose scale to assure
satisfactory operation
For water-using equipment:
Steamers and Combi-ovens
Ice Machines
Coffee and Espresso Machines
Proofers
EV9799-04

SSW-10 Wrap ScaleStick®
Dimensions:
Wrap ScaleStick SSW-10:
9-9/16”H x 1-5/16” Diameter
Filter Wraps:
7-11/16"H x 2-13/16" Diameter
Service Flow Rate:
0.1 - 6 gpm
Maximum Temperature: 150°F*
*If inlet feed water temperature is above
125°F a hot water housing must be used.
Note: Filter Wraps are not to be used in hot
water feed applications.
**The ScaleStick® trademark is used
pursuant to an agreement between PWC
Enterprises and Everpure, Inc.
Scale Reducing Cartridge
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.