Everpure 4CB5-MR Cartridge E17-17 User manual

B E N E F I T S
A P P L I C A T I O N / S I Z I N G
I N S T A L L A T I O N T I P S O P E R A T I O N T I P S
MRS-20
Complete Mineral Reduction Water Processing System
MRS-20T System: EV9797-92
4CB5-MR cartridge: E17-17
4MR-1 Cartridge: EV9273-69
Improves equipment life and performance by
removing at least 90%+ of all dissolved solids
that cause scale build-up
Protects against taste and odor causing
contaminants while removing dirt, particulates
and dissolved minerals
Less frequent deliming of equipment means
reduced maintenance and service costs
Sanitary cartridge replacement is simple, quick
and clean. Internal filter parts are never exposed
to handling or contamination
Two-part design makes installation flexible, and
small footprint easily fits in any kitchen
Easy to operate system has no moving parts and
requires no electrical power
System includes mineral reduction processor,
carbon filter cartidge, reverse osmosis cartridge,
and storage tank
No monitoring of grains per gallons is necessary.
System removes scale reducing minerals regardless
of the GPG
Choose a mounting location suitable to support
the full weight of the system when operating
Mount system convenient to the post water
softener supply line and for routing the outlet and
drain lines
The tank assemby may be mounted above, below
or alongside (preferred) of the water processor
assembly
Install vertically with cartridges hanging down.
Allow 2-1/2" clearance below the cartridge for
easy cartridge replacement
The water inlet must supply a minimum of 0.5
gpm at 50-85 psi on a consistent basis
Deliming of equipment prior to application is
recommended
Replace the 4CB5-MR carbon filter every 12
months. Change the 4MR-1 mineral reduction
cartridge every two years, or as needed
Cartridge replacement schedules assume the
system is installed on softened water
Outlet Water Production: 25 gal. per day (54.5L)
@ 50 psig (340 kPa), 77°F (25°C) per NSF
Standard 58 testing. Water production depends
on supply water pressure and temperature
Wastewater Production: 74 gal. per day (289L)
@ 50 psig (340 kPa), 77°F (25°C). Wastewater
drain line capacity: 3 gpm (21 Lpm) to open
atmosphere
Storage Tank Capacity: 3 gallon tank; effective/
usable capacity: 2.5 gal. (9.5L)
Mineral Reduction System for foodservice
applications
Ideal for: Flash steamers, conventional steamers,
cheese melters, combi-ovens and coffee/espresso
machines
Uniquely designed for low volume applications
(approximately 25 gpd nominal consumption)
EV9797-91
MRS-20 System: EV9797-91
4CB5 cartridge: EV9617-11
MR-20 Cartridge: EV9273-69

27"
22.5"
25"
22.5"
OUTLET
3/8" FNPT
INLET
3/8" FNPT
MRS-20
Overall Dimensions:
Processor - 25”H x 22.5"”W x 5”D
Tank - 27”H x 22.5"”W x 11.25”D
Inlet and Outlet connection:
3/8” OD John Guest tubing fitting (provided)
3/8" ID beverage hose
Wastewater line and Sample port connection:
1/4" OD John Guest tubing fitting (provided)
Steamer manifold connection:
1/4" quick connect on tubing coil (provided)
Steamer feed hose connection:
3/8" barb on tubing coil (provided)
Pressure Requirements:
10 psi -125 psi (0.7 – 8.6 bar), non-shock
Water Supply:
0.5 gpm (1.9L) @ 50-85 psi (280-595 Kpa)
Inlet Temperature:
40°F - 100°F (4-38°C)
Inlet TDS:
1,500 ppm max recommended
Operating Weight: 50 lbs.
The contaminants or other substances
removed or reduced by this drinking water
system are not necessarily in your water. Do
not use with water that is microbiologically
unsafe or of unknown quality without
adequate disinfection before or after the
system. Systems certified for cyst reduction
may be used with disinfected water that may
contain filterable cysts.
MRS-20T
Everpure, LLC
1040 Muirfield Drive
Hanover Park, IL 60133
Ph: 630-307-3000 Fax: [phone]
Everpure water treatment systems (excluding replaceable elements)
are covered by a limited warranty against defects in material and
workmanship for a period of five years after date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in
material and workmanship for a period of one year after date of
purchase. See printed warranty for details. Everpure will provide a
copy of the warranty upon request.