EVERSAFE V2 Backpack User manual

Travel | Safe | Eversafe®
EVERSFE®
Travel | Safe | Eversafe™
Technology for keeping personal property safe
www.eversafetech.com
Instruction Manual
Reset Strap Lock
1Open the lock using the code 0000
2Turn the ribbed dial 90 degrees clockwise
3Set your desired combination
4Turn the dial back to reset
Ribbed Dial
Installing the Safedock
Wood
1Drill two pilot holes using the
Safedock as a guide marker
2Using the fixings suitable for the
surface drill holes and screw your
Safedock down
Fix the Safedock to wooden floors and furniture
using standard wood screws (9mm / 3/8 in)
Concrete
Fix to a concrete surface using concrete anchors
or screws (9mm / 3/8 in)
Car
When fixing a Safedock to a car we recommend
getting the product installed by a professional at
a car body shop
When installing the Safedock ensure there are no
pipes, underfloor heating or wires that could get
damaged in the process.
Caution
When installing the Safedock use the dock holes
as a guide when drilling.
Secure
The cable strap can be easily locked to multiple
secure fixings, such as,
- Closed leg tables
- Chairs
- Benches
- Poles
Note
Release the strap buckles when extra length is
required when securing your backpack
Things you will need
-Drill and drill bits
-Suitable fixings (wood or concrete)
For optimum security it is best to install the
Safedock on a level surface
Note
Eversafe Technologies Limited
8 Monaghan Court, Monaghan Street
Newry, Co Down
UK BT35 6BH
Phone UK: [phone]
Email: [e-mail]
Eversafe Europe Limited
Hamilton House, 28 Fitzwilliam Place
Dublin, Ireland, D02 P283
Phone Ireland: [phone]
www.eversafetech.com
Eversafe USA INC
1390, Columbia Ave #257,
Lancaster PA 17603, United States.
Phone USA and Canada:
[phone]
1Open the lock using the code 0000
2Turn the U bolt clockwise. Line up the notch
on the U bolt with the slot in the main body
and push down
Reset Pad Lock
3While keeping the U bolt pressed down set
your desired combination
4Release the U bolt, turn it back and lock it
into the main body to reset the code
Main body
U bolt
Slot
Visit the Eversafe website to watch instructional
videos on how to install your Safedock
Instruction Manual
V2 Backpack
All Versions

4.7-5mm Pad Lock
High Quality,
Hardened Padlock

Cable Lock (Retractable)
1
1
Pull from bag to lock, attach through
strap cable after wrapping it around pole
or other fixture. Simply push back in
when not in use.

1Open the lock using key
The cable strap can be easily locked to
multiple secure fixings, such as,
- Closed leg tables
- Chairs
- Benches
- Poles
Secure

Travel | Safe | Eversafe®
EVERSFE®
Travel | Safe | Eversafe™
Technology for keeping personal property safe
www.eversafetech.com
Instruction Manual
Reset Strap Lock
1Open the lock using the code 0000
2Turn the ribbed dial 90 degrees clockwise
3Set your desired combination
4Turn the dial back to reset
Ribbed Dial
Installing the Safedock
Wood
1Drill two pilot holes using the
Safedock as a guide marker
2Using the fixings suitable for the
surface drill holes and screw your
Safedock down
Fix the Safedock to wooden floors and furniture
using standard wood screws (9mm / 3/8 in)
Concrete
Fix to a concrete surface using concrete anchors
or screws (9mm / 3/8 in)
Car
When fixing a Safedock to a car we recommend
getting the product installed by a professional at
a car body shop
When installing the Safedock ensure there are no
pipes, underfloor heating or wires that could get
damaged in the process.
Caution
When installing the Safedock use the dock holes
as a guide when drilling.
Secure
The cable strap can be easily locked to multiple
secure fixings, such as,
- Closed leg tables
- Chairs
- Benches
- Poles
Note
Release the strap buckles when extra length is
required when securing your backpack
Things you will need
-Drill and drill bits
-Suitable fixings (wood or concrete)
For optimum security it is best to install the
Safedock on a level surface
Note
Eversafe Technologies Limited
8 Monaghan Court, Monaghan Street
Newry, Co Down
UK BT35 6BH
Phone UK: [phone]
Email: [e-mail]
Eversafe Europe Limited
Hamilton House, 28 Fitzwilliam Place
Dublin, Ireland, D02 P283
Phone Ireland: [phone]
www.eversafetech.com
Eversafe USA INC
1390, Columbia Ave #257,
Lancaster PA 17603, United States.
Phone USA and Canada:
[phone]
1Open the lock using the code 0000
2Turn the U bolt clockwise. Line up the notch
on the U bolt with the slot in the main body
and push down
Reset Pad Lock
3While keeping the U bolt pressed down set
your desired combination
4Release the U bolt, turn it back and lock it
into the main body to reset the code
Main body
U bolt
Slot
Visit the Eversafe website to watch instructional
videos on how to install your Safedock
Installing the Safedock
- Drills and drill bits
- Suitable fixings (wood or concrete)
For optimum security it is best to install the
Safedock on a level surface
Drill two pilot holes using the Safedock
as a guide marker
2 Using the fixings suitable for the surface
drill holes and screw your Safedock down
When installing the Safedock use the dock
holes as a guide when drilling.
Things you will need
Note
1
2

Fix the Safedock to wooden floors and
furniture using standard wood screws
(9mm / 3/8 in)
Fix to a concrete surface using concrete
anchors or screws (9mm / 3/8 in)
When fixing a Safedock to a car we
recommend getting the product installed by a
professional at a car body shop
When installing the Safedock ensure there
are no pipes, underfloor heating or wires that
could get damaged in the process.
Visit the Eversafe website to watch
instructional videos on how to install your
Safedock
Wood
Concrete
Car
Caution

Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Contents
Backpack
Eversafe Backpack
Velcro backing
allows for any logo
to be attached or
no logo at all.
Zipper Cover Lock Cable
Zipper Padlock
Zipper Cover Pad Lock
To padlock zipper. Pulls zips together and
insert padlock in both locking hoops.
1
1
2
2
3
3
4
4

Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Zipper Cover
For optimum security lock down the zipper
cover using the zipper cable and pad lock.
Pull the zipper cover over the zip inserting the
pillars into the eyelets.

Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Note
The zipper cable is located in the outside
pocket in the front of the backpack.
Insert the cable through all six pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way.
2
3

Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
4
Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Once the cable has come through all six pillars
lock the cover in place at the pillar containing
two holes with the keyed padlock.

Base Unit (sold separately)
Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
x2
12
34
Safedock Base
keys
20mm Thumbscrews
Safedock
Keyed Euro Lock activates
dock release
1
2
3
4
Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note

Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Base Attachment
Remove Backpack Base Feet
Remove the base feet and 12mm
thumbscrews from the bottom of the
backpack
Retain feet and thumbscrews for future use
1
Note

Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Keyed dock release
Place the 25mm thumbscrews through
the holes located in the bottom of the bag
2
3
2

Contents
x4
Base Attachment
2
3
4
5
2Feed the base cable through the center hole
at the bottom of the backpack
3Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4Insert the screws into the holes located in
the base and twist to tighten
5Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
12
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1 x1
x1
12
3
1
34
2
1Eversafe Backpack
2Zipper Cover Lock Cable
3Zipper Cover TSA Combination Lock
1Safedock Base
3Safedock
4Base Release Clip
220mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Insert the screws into the holes located in
the base and twist to tighten
Insert key and turn to release dock
4
5
5
5
When reattaching the base feet follow
steps 3 and 4
Note
4

Eversafe Technologies Limited
8 Monaghan Court, Monaghan Street
Newry, Co Down
UK BT35 6BH
Phone UK: [phone]
Email: [e-mail]
Eversafe USA Inc.
3877 Copper Ridge Ct,
Amelia, OHIO 45102
Phone US: 1-602 390 7044
Email: [e-mail]

Travel | Safe | Eversafe®
EVERSFE®
Travel | Safe | Eversafe™
Technology for keeping personal property safe
www.eversafetech.com
Instruction Manual
Reset Strap Lock
1Open the lock using the code 0000
2Turn the ribbed dial 90 degrees clockwise
3Set your desired combination
4Turn the dial back to reset
Ribbed Dial
Installing the Safedock
Wood
1Drill two pilot holes using the
Safedock as a guide marker
2Using the fixings suitable for the
surface drill holes and screw your
Safedock down
Fix the Safedock to wooden floors and furniture
using standard wood screws (9mm / 3/8 in)
Concrete
Fix to a concrete surface using concrete anchors
or screws (9mm / 3/8 in)
Car
When fixing a Safedock to a car we recommend
getting the product installed by a professional at
a car body shop
When installing the Safedock ensure there are no
pipes, underfloor heating or wires that could get
damaged in the process.
Caution
When installing the Safedock use the dock holes
as a guide when drilling.
Secure
The cable strap can be easily locked to multiple
secure fixings, such as,
- Closed leg tables
- Chairs
- Benches
- Poles
Note
Release the strap buckles when extra length is
required when securing your backpack
Things you will need
-Drill and drill bits
-Suitable fixings (wood or concrete)
For optimum security it is best to install the
Safedock on a level surface
Note
Eversafe Technologies Limited
8 Monaghan Court, Monaghan Street
Newry, Co Down
UK BT35 6BH
Phone UK: [phone]
Email: [e-mail]
Eversafe Europe Limited
Hamilton House, 28 Fitzwilliam Place
Dublin, Ireland, D02 P283
Phone Ireland: [phone]
www.eversafetech.com
Eversafe USA INC
1390, Columbia Ave #257,
Lancaster PA 17603, United States.
Phone USA and Canada:
[phone]
1Open the lock using the code 0000
2Turn the U bolt clockwise. Line up the notch
on the U bolt with the slot in the main body
and push down
Reset Pad Lock
3While keeping the U bolt pressed down set
your desired combination
4Release the U bolt, turn it back and lock it
into the main body to reset the code
Main body
U bolt
Slot
Visit the Eversafe website to watch instructional
videos on how to install your Safedock