EVOCONNECT UC91HM User manual

1. Introduction
2. Features
5. Package Contents
①1× HDMI Capture
②1× User Manual
4. Specifications
3. Operation Controls and Functions
HDMI to USB Video Capture
VER 1.0
This HDMI to USB2.0 video capture can collect HDMI audio & video input signals.
The captured video resolution is up to 4K2K@30Hz, and the output resolution is
up to 1080P@60Hz. The product has the advantages of high performance, high
compatibility, easy to carry and install. It is compatible with Windows, Linux, Mac
OS X operating system and USB2.0 port, plug and play, easy to use.
☆HDMI 1.4 and HDCP 1.4 compliant
☆ Support 10.2Gbps video bandwidth
☆The captured video resolution is up to 4K2K@30Hz, and the output resolution is
up to 1080P@60Hz
☆Be compatible with Windows, Linux, Mac OS X operating system and USB2.0 port
☆Support automatic recognition of input video format
6. Software instruction
Take OBS (Open Broadcaster Software) software, windows10 system as an example.
The specific opertation is as below:
1. Install the “OBS” application software on the computer.
2. Double click “OBS Studio” shortcut to open the application.
3. Click the “+”, you can see a drop-down menu and select “Video Capture Device”,
and then click “OK” button.
4. Select “MiniFHD Capture” in the Device option box, then check “Use custom audio
device” under Audio Output Mode, and select “USB Digital Audio” for Audio Device.
Then click “OK” button.
2/6 3/6
Human body model —
±8kV (Air-gap discharge) & ±4kV (Contact discharge)
ESD Protection
Technical
HDMI Compliance HDMI 1.4
HDCP Compliance HDCP 1.4
Video Bandwidth 10.2 Gbps
Video Resolution Input: Up to 4k2k@30Hz;Output: Up to 1080P@60Hz
Color Space RGB, YCbCr 4:4:4/4:2:2, YUV 4:2:0
HDMI Audio Formats LPCM2.0
1x HDMI [Type A 19-pin female]
Power Supply
Dimensions
Black
Color
51mm[W] x 31mm[D] x 13mm[H]
PC USB 5V
Operating Temperature
Storage Temperature
32 - 104°F / 0 - 40°C
Relative Humidity
-4 - 140°F / -20 - 60°C
20 - 90% RH (no condensation)
Mechanical
Plastic EnclosureHousing
Weight 16g
Color Depth 8/10/12-bit (1080P@60Hz);8-bit (4K2K@30Hz YUV4:4:4)
Input
Output 1x USB [Type A male]
USB Version USB 2.0
Connection
Power Consumption 1.75W
User Manual
1/6
①USB port: USB signal output port, connect to the USB port of a PC directlly.
②STATUS LED: Red LED is always on when the capture is connected to active HDMI
IN signal source, flashes slowly when not connected, about 1 second once.
③ HDMI IN port: HDMI signal input port, connect to HDMI source device such as DVD
with HDMI cable.

7. Application Example
5. Click “Settings” to open Settings page, then select “Output” option. In this
page, you can select recording path for video capture, and set recording
quality, recording format etc. Then click “Apply” button and “OK” button.
6. In the Settings page, you can select “Audio” option. In this page, you need set
“Sample Rate”, and select “USB Digital Audio” for the “Mic/Auxiliary Audio”.
Then click “Apply” button and “OK” button.
7. In the Settings page, you can select “Video” option. In this page, you can select
“Base Resolution” and “Output Resolution”. Then click “Apply” button and “OK”
button.
8. Use the mouse to click the Setting icon, then select “Advanced Audio Properties”
option. In the Advanced Audio Properties page, you should select “Monitor and
Output” option. Then click “Close” button.
Note: The instruction of the software is only about video capture settings at the
above content. You can browse other related settings function.
10. When the video capture is finished, you can click the “Exit” button to close the
software.
4/6 5/6 6/6
9. When you have finished all settings, you can click the “Start Recording” button to
start video capture. If it has finished, click this button again to stop video capture.
PC
HDMI
cable
DVD
Capture
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.