evodesk Studio L User manual

For technical support visit evodesk.com/support Studio L Assembly - 1
EVODESK STUDIO L
TOOLS REQUIRED
Additional Components Included
x1 x1
Extended foot Extended
Side Bracket
Leveling Studs
Phillips Head Screwdriver
and/or Power Drill
No.16 No.17 x1
No.10
Phillips Screws
10-24 x ½”
x9No.13b
16
10
13
17
The Studio L upgrade replaces two components on the standard Evodesk to accommodate
the larger desktop. An extended side bracket and extended foot are included in the Studio L
box. There will be an extra standard foot and standard side bracket, should you decide to
change desktops.

EVODESK STUDIO L
Studio L Assembly - 2v.3.10.17
In Step 9 of the desk manual, use 7 10-24 x ½” (#13-b)
Phillips Screws to connect the frame to the desktop.
6
4 5
7
1
2
3
In Step 6 of the desk manual, replace the default foot with
the inlcuded extended foot and match to the same side as
shown.
In Step 4 of the desk manual, replace one of the
default side brackets with the extended side
bracket from this kit.