World Market SHEA -622464 User manual

SHEA CANE A-FRAME ACCENT CHAIR
SKU–622464
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
ALL PRODUCTS SOLD AT WORLD MARKET ARE NOT FOR COMMERCIAL
USE AND ARE INTENDED FOR RESIDENTIAL USE ONLY
Page 1
Assembly Instructions
2022.02.01

LABEL
Page 2
Component List
DESCRIPTION QTY
AChair Back
B
1
Chair Seat 1
1
Hardware List
Flat Washer M6
H-2Lock Washer M6
11
11
11
Tool List
LABEL
H-1
DESCRIPTION QTY
LABEL DESCRIPTION QTY
T-1
H-3
Allen Bolt
M6x40mm
Allen Key
Right leg
C1
DLeft leg 1

Assembly Preparation
Before Beginning:
• Unpack all hardware bags and components to ensure you have all parts-
• Read instructions, cover to cover-
• Have 2 adults on hand for assembly-
• Do not assemble on flooring or carpet-
• Assemble on a clean non-marring surface (packing foam)-
• Save all packaging until finished-
• In case of missing parts, please contact your nearest World Market store or
call our customer service call center at call 1-877-967-5362.
Page 3
(H-2)Lock Washer x 11 (H-3)Flat Washer x 11
(H-1)Allen Bolt x 11
A
B
C
D
•WARNING: Small parts are a choking hazard. Adult supervision is required before,
during and after assembly.

Assembly Steps
Step 1
Page 4
(T-1)Allen Key x 1
(H-2)Lock Washer x 3
(H-3)Flat Washer x 3
(H-1)Allen Bolt x 3
Step 2
(T-1)Allen Key x 1
(H-2)Lock Washer x 1
(H-3)Flat Washer x 1
(H-1)Allen Bolt x 1
(T-1)
(H-1)
(H-3)(H-2)
Front
Front
Position Chair Back (A) onto the assembly as shown. Insert dowels in Chair Seat (B) into receiving holes in
Chair Back (A). Align through-hole in the inner frame of Chair Back (A) with the receiving hole in Left Leg
(D). Secure with Allen Bolt (H-1), Lock Washer (H-2) and Flat Washer (H-3) using provided Allen Key (T-1),
stacking the hardware in the order as shown. Engage bolt, but do not yet fully tighten.
Place Left Leg (D) onto a padded, non-marring surface. Make sure the pre-drilled holes face upward.
Position Chair Seat (B) onto Left Leg (D) as shown, ensuring the front of the Chair Seat (B) is oriented
toward the front of the Left Leg (D). Insert dowels in Chair Seat (B) into receiving holes in Left Leg (D),
then secure with Allen Bolts (H-1), Lock Washers (H-2) and Flat Washers (H-3) using provided Allen Key
(T-1), stacking the hardware in the order as shown. Engage all bolts, but do not yet fully tighten.
(H-3)
(H-2)
(H-1)
(T-1)
B
Front

Assembly Steps
Step 3
Page 5
(T-1)Allen Key x 1
(H-2)Lock Washer x 3
(H-3)Flat Washer x 3
(H-1)Allen Bolt x 3
(H-3)
(H-2)
(H-1)
(T-1)
Step 4
(T-1)Allen Key x 1
(H-2)Lock Washer x 4
(H-3)Flat Washer x 4
(H-1)Allen Bolt x 4
(T-1)
(H-1)
(H-2)
(H-3)
(T-1)
(H-1)
(H-2)
(H-3)
Front
Secure Chair Seat (B) to Chair Back (A) with Allen Bolts (H-1), Lock Washers (H-2) and Flat Washers (H-3)
using provided Allen Key (T-1), stacking the hardware in the order as shown. Engage all bolts at all 3
locations, but do not yet fully tighten.
Front
Position Right Leg (C) on to assembly as shown. Insert dowels in Chair Seat (B) into receiving holes in
Right Leg (C). Secure with Allen Bolts (H-1), Lock Washers (H-2) and Flat Washers (H-3) using provided
Allen Key (T-1), stacking the hardware in the order as shown. Align through-hole in the inner frame of
Chair Back (A) with the receiving hole in Right Leg (C). Secure with the same process. Engage all
hardware, but do not yet fully tighten.

Assembly Steps
Step 5
Page 6
Carefully turn chair upright. Fully tighten all hardware from all previous steps. Do not over tighten.
Assembly is complete and product is ready for use.

Care & Maintenance
• Do not put hot items directly on furniture surface.
• Do not clean furniture with harsh cleansers or polish.
• Do not place furniture in direct sunlight.
• Do not place furniture near heating or cooling vents.
• Do not write on furniture without a padded barrier to protect the surface.
• Do not place furniture outside. For indoor use only.
• All products sold at World Market are not for commercial
use are intended for residential use only.
• Dust and pick-up spills using a clean, non-colored, lint-free, dry cloth.
Page 7

Page 8