Evolur aurora User manual

Read all instructions before
assembling and using product.
IMPORTANT - Keep Instructions
for future use.
0821R2-EV832
Owner’s Manual
Le manuel du propriétaire
AURORA
Convertible Crib
Lisez toutes les instructions avant d'assembler et d'utiliser le produit.
IMPORTANT - Conservez les instructions pour une utilisation future.
Scan the QR code to register your product
https://www.evolurbaby.com/customer-care/product-registration/

2www.evolurbaby.com/help
SAFE SLEEP TIPS
Adult Assembly
Required.
DO NOT use the
product if it is
damaged, broken,
and/or components are
missing or broken.
To protect your parts
during assembly
please place them on a
soft surface.
Contact Evolur Inc
In case of any
assistance needed.
Small parts may
present choking
hazard prior to
assembly.
Please read the
instructions
thoroughly. Identify all
parts & hardware.
Do Not Use Power
Drills or Drivers.
To clean surface, use
only water on a damp
cloth. Do not use
window cleaner or
cleaning abrasive as it
will scratch the
surface and could
damage the protective
coating.
For a Safe and
comfortable Sleep
experience, we
suggest using Evolur
Green Gaurd Gold
Snug Fit Full-Size
Mattress.
0-6

3www.evolurbaby.com/help
…. for choosing Evolur and congratulations on joining our family;
a family that has been transforming lives for 30 years!
We appreciate your feedback and wish you the very best in the
coming years with your new addition. If you have any questions
or concerns please don’t hesitate to reach out to us. One of our
trusted Customer Care representatives will be happy to assist you.
Thank you again for entrusting us to supply you with safe,
and affordable baby products and accessories.
THANK YOU...!
LIMITED WARRANTY:
• Evolur warrants its product to be free from defects in material and
workmanship and agrees to remedy any such defect.
• This warranty covers 1 year from the date of original purchase.
• This warranty is valid only upon presentation of proof of purchase.
• This is solely limited to the repair or replacement of defective
furniture components and no assembly labor is included.
• This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse or which has
been altered or repaired in any way.
• This warranty gives you specific legal rights and you may also have
other rights which vary from State to State.

4
•FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONSCOULD
RESULT IN SERIOUS INJURY OR DEATH.
• TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMENDHEALTHY INFANTS BE
PLACED ON THEIR BACKS TO SLEEP,UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN
• CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR
SHARP EDGES BEFORE AND AFTER ASSEMBLY ANDFREQUENTLY DURING USE.
• DO NOT USE THIS CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT
DREAM ON ME - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
FOR REPLACEMENT PARTS.
• DO NOT USE A WATER MATTRESS WITH THIS CRIB.
• READALL INSTRUCTIONS BEFORE ASSEMBLING CRIB.KEEP INSTRUCTIONS FOR
FUTUREUSE.
• IF REFINISHING,USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.
STRANGULATION HAZARD:
• STRINGS CAUSE STRANGULATION!DONOT PLACE ITEMS WITH A STRINGAROUND A
CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIERCORDS.DO NOTSUSPEND STRINGS
OVER A CRIB OR ATTACH STRINGS TO TOYS.
• TO HELP PREVENT STRANGULATION TIGHTENALL FASTENERS. A CHILD CAN TRAP PARTS
OF BODY OR CLOTHING ON LOOSE FASTENERS.
•DO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROMBLINDS OR DRAPES
MAY STRANGLE A CHILD.
•INFANTS CAN SUFFOCATE ON SOFT BEDDING.
• NEVERADD A PILLOW,COMFORTEROR PADDING.
• NEVERPLACE ADDITIONAL PADDINGUNDERINFANT.
• NEVER USE PLASTICSHIPPING BAGS OR ANY PLASTIC FILM AS MATTRESS COVERS,
BECAUSE THEYCAN CAUSE SUFFOCATION.
•INFANTS CANSUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS THAT IS
TOO SMALL.ANY MATTRESSUSED IN THIS CRIBMUST BE AT LEAST27-1/4 IN (69CM)
BY 51-5/8 IN (131CM), WITH A THICKNESSNOT EXCEEDING 6 IN (15CM)ANDAMINIMUM
THICKNESS OF 4 IN (10CM).THE DIMENSIONS OF THE MATTRESS SHALL BE TAKEN
FROM SEAM TO SEAM OR EDGE TO EDGE WHERE APPROPRIATE.
FALLHAZARD
• WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO LOWEST
POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THAT
COULD SERVE AS STEPS FOR CLIMBING OUT.
AFTER RAISING SIDE, MAKE SURELATCHES ARE SECURE(DISREGARD FOR NON-DROP
SIDECRIB).
• DO NOT LEAVECHILD IN CRIB WITH SIDES LOWERED. BE SURE SIDE IS IN RAISED AND
LOCKED POSITION WHENEVER CHILD IS IN CRIB (DISREGARD FOR NON-DROP SIDECRIB).
• STOPUSING CRIB WHENCHILD BEGINS TO CLIMB OUT OR REACHES THE HEIGHT
OF 35 IN (89CM).
•WHEN STORINGCRIBUSE CAUTION AS EXTREMECHANGES IN TEMPERATURE OR HUMIDITY
CAN COMPROMISE THE CRIB MAKING IT EXTREMELY DANGEROUS TO YOUR CHILD.
• USE CAUTIONWHEN A VAPORIZER OR HUMIDIFIER IS IN USE. ALWAYS AIM VAPOR AWAY
FROMTHE CRIB AS WELL AS ANY OTHER WOODENFURNITURE. PROLONGED PERIODS
OF HUMIDITY IN STORAGE AS WELL AS IN THE HOME CAN COMPROMISE THE CRIB.
• AVOID USING VAPORIZERS ANDHUMIDIFIERS FORPROLONGED PERIODS OF TIME.
• FOLLOW WARNINGS ON ALLPRODUCTS IN CRIB.
WARNING!
BULLETIN NO. WC01-06

5
• Do not usethis cribif youcannotexactly followthe accompanyinginstructions
•Donot use this crib for a childwho can climb out of it or who is taller than 90 cm
•Donotplace in or near thiscrib any cord, strap or similar item that couldbecome wrapped around
a child’sneck
•Donotplace this crib neat a window or a patio doorwhere the child could reach the cord of a blind or
curtainandbe strangled
•Check this cribregularly beforeusingitanddonot use it if any partsareloose or missingorif there are
any signs of damage. Do not substituteparts.Contact themanufacturer if replacementparts or
additionalinstructions are needed
• Use a cribmattressthat is no thickerthan 15 cm and is of such a sizethat,when it is pushfirmly
againstany sideof crib,itdoes not leave a gap of morethan 3 cm betweenthemattress and any part
of thesides of thecrib.
•Childrencansuffocate on softbedding. Do notplacepillows,comfortersorsoft mattress in this crib.
WARNING
• Ne pas utiliser le lit a moins d’ ètre en mesure de suivre précisément les instructions qui l’ accompagnent.
• Ne pas uliliser le lit si l’ enfantest capable d’ en sortir on mesureplus de 90 cm
• Ne pas mettredans le lit on à proximité de celui-cidescordes, courroies on objects semblablesqui
risqueraient de s’enroulerautour du cou de l’ enfant
•Nepasplacer le litprès d’ une fenètre on d’ uneporte-fenètre on l’ enfantpourrait se saisir de codes
d’ un storeoud’unrideau et s’ etrangler
• Vérifierrégulièrement le litpréabablement à son utilisations et ne pas l’ utiliser en cas de détection
d’ unepiècedesserrée, de piècemanquante ou de tout signe de dommages. Ne passubstituer une
pièce a uneautre. Communiquer avec le fabricantpourobtenir, au besoin,unepièce de rechange ou
des instructions supplémentaires.
• Utiliser un matelaspourlit d’ enfantdont l’ épaisseur est d’ au plus 15 cm et dont la superficie perment
d’ empêcher, lorsqu’il est poussé fermement contre un côté quelconque du lit, qu’un espace de plus de
3 cm soit crééentre le matelas et unepartiequelconque de tout côté
•L’enfantpeut s’ étouffer en présence d’ articles de literie mous. Ne pasmettredans le lit d’ oreiller,
d’ édredon ou de matelas mou.
MISE EN GARDE
BULLETIN NO. WC-SOR/2010-261_01

6www.evolurbaby.com/help
Footboard
1
Right Panel
4Left Panel
Headboard
5
3Left Leg
7
8
2Right Leg
Mattress Support
6
Left Feet
11
Right Feet
10
PARTS
If there are any missing parts, please contact Evolur before using the
product.
Right Top Cap (Keep
parts for Day bed and
Toddler Bed
Conversion)
9Left Top Cap (Keep
parts for Day bed and
Toddler Bed
Conversion)

7
PARTS LIST
www.evolurbaby.com/help
PART NO
NUMÉRO D'ARTICLE
DESCRIPTIONS DESCRIPTIONS QUANITY
quantité
1 1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
9
FOOTBOARD marchepied
la jambe gauche
jambe droite
panneau droit
panneau gauche
support de matelas
tête de lit
capuchon supérieur
droit
capuchon supérieur
gauche
LEFT LEG
RIGHT LEG
RIGHT PANEL
LEFT PANEL
MATTRESS SUPPORT
HEAD BOARD
RIGHT TOP CAP
LEFT TOP CAP
110 pieds droiteRIGHT FEET
1TEEFTFEL11 pieds gauche

8www.evolurbaby.com/help
HARDWARE
x 2 (2-1/2”)
x 4 (5/8”)
x 4 (1-1/2”)
A
x 6 (2-3/8”) G
x 4 (1-3/4”)
E
x 2 (2-3/4”)
F
B D
X 1
C
KEEP PARTS FOR DAY BED AND TODDLER BED
(GARDEZ DE PIECES POUR LIT ET JOUR LIT)
x 6 (1-3/8”)
H
HARDWARE AND TOOL DIAGRAM
S'il y a des pièces manquantes, veuillez contacter Evolur avant d'utiliser le produit.
If there are any missing parts, please contact Evolur before using the product.
CONSERVER LES PIÈCES POUR LE LIT DE JOUR ET LE LIT D'ENFANT
(GARDEZ DE PIECES POUR LIT ET JOUR LIT)

x 2 (2-1/2”) A
X 4 (1-3/4”)
E
9www.evolurbaby.com/help
CRIB ASSEMBLY - FRONT LEGS ASSEMBLY
1
1a. Align the Left Leg
(3) towards the left
end of the
Footboard (1).
Similarly, Align the
Right Leg (2)
towards the right
end of the
Footboard (1).
1b. Insert the Bolts (A)
at the lower hole of
both the Left and
Right Legs as
shown in the
diagram.
1c. Insert the Bolts (E)
at the middle and
upper hole of both
the Left and Right
Legs as depicted.
1d. Tighten the Bolts
(A) and (E) using
the Allen Key (C)
provided.
(1)
(A)
(A)
(3)
(2)
(E)
(E)

10 www.evolurbaby.com/help
2
CRIB ASSEMBLY – SIDE PANEL ASSEMBLY
2a. To assemble the
Left Panel (5) and
Right Panel (4) of
the Crib, align
them to the
Footboard (1) as
shown in figure.
2b. Insert the Bolts
(B) inside the
holes provided at
the top and the
lower end.
2c. Tighten all the
four Bolts (B)
using the Allen
key (C).
(1)
(5)
(4)
x 4 (1-1/2”)
B

3
CRIB ASSEMBLY – MATTRESS SUPPORT ASSEMBLY
11 www.evolurbaby.com/help
D
3a. Attach all the corners of
Mattress Support Panel
(6) to the Footboard (1),
Left Panel (5) and Right
Panel (4) as shown in
diagram.
3b. Insert the Bolts (D) and
tighten it using the
Allen Key (C).
3c. Note that Lowest
position of the Mattress
Support Panel will be
for Toddler (babies who
can stand up and walk)
, Mid position is for
Infant babies who start
to turn and sit up) and
Highest Position is for
the New born.
3d. Ensure that the
Mattress Support Panel
is flat side up and not
slant.
(6)
X 1
C
x 4 (3/4”)
D

4
CRIB ASSEMBLY – REAR LEGS ASSEMBLY
12 www.evolurbaby.com/help
4a. Align the Left Feet (11)
to the bottom left side
of the Headboard (7).
4b. Use the Bolts (H), to
fix the Rear Left Leg
to the Headboard as
shown in the picture.
Tighten the bolts
using Allen Key (C).
4c. Similarly follow the
above steps to fix the
Right Feet (10).
(7)
(11)
(10)
x 6 (1-3/8”)
H

5
13 www.evolurbaby.com/help
CRIB ASSEMBLY - BACK PANEL ASSEMBLY
5a. Align the Headboard
(to which the Rear
Legs are attached),
to the Left and Right
Panel as shown in
the diagram.
5b. Insert the bolts (G)
inside the holes
provided on the
both the Side
Panels as shown.
5c. Ensure that the
alignment is right
and Panels are firm
before you start
using the crib. Do
not overtighten.
x 6 (2-3/8”) G

14
BULLETIN NO. WTB-01
• FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH FROM ENTRAPMENT OR STRANGULATION.
• DO NOT PLACE BED NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPES
MAY STRANGLE A CHILD.
• THE MATTRESS INTENDED FOR USE ON THIS BED SHALL BE A FULL-SIZE CRIB
MATTRESS HAVING THE DIMENSIONS OF 51-5/8 IN (1310 MM) IN LENGTH AND
27-1/4 IN (690 MM) IN WIDTH AND THICKNESS OF 4 IN (100 MM) OR A GREATER
THICKNESS AS SPECIFIED BY THE MANUFACTURER.
• THE MINIMUM AGE OF THE INTENDED USER SHALL NOT BE LESS THAN 15 MONTHS
AND THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50 LBS. (22.7 KG).
WARNING!
For Toddler Bed Use

1
15 www.evolurbaby.com/help
CONVERSION MODES - DAY BED ASSEMBLY
1a. In order to convert the crib
to Full-Size bed, you must
first remove the Footboard
of crib.
1b. Fix the Right Top Cap (8) at
the top of the Right Front
leg and Left Top Cap (9) at
the top of the Left Front Leg
attached to the side panel,
with the help of Bolts (F)
provided. (Refer the
diagram)
1c. Then attach the Stabilizer
bar using the bolts from the
Footboard removal.
1d. Make sure to follow the
complete instructions
provided with the Toddler
Guard Rail.
Guard Rail and Stabilizer Bar (NOT INCLUDED, SOLD SEPARATELY)
NOTE:
* Make sure mattress support is
at the lowest position.
* Make sure to use Stabilizer
bar that is included with Evolur
Universal Toddler Guard Rail
(SKU- 846) to convert the crib
to day bed.

16 www.evolurbaby.com/help
2
CONVERSION MODES - TODDLER BED ASSEMBLY
2a. In order to convert
the crib to Full-Size
bed, you must first
remove the
Footboard of the
crib.
2b. Then attach the
Stabilizer bar and
Toddler Guard Rail
using the bolts from
the Footboard
removal.
2c. Make sure to follow
the complete
instructions
provided with the
Toddler Guard Rail.
Guard Rail and Stabilizer Bar (NOT INCLUDED, SOLD SEPARATELY)
NOTE:
*Make sure mattress support is
at the lowest position.
*Make sure to use Toddler
Gaurd Rail and Stabilizer bar
that is included with Evolur
Universal Toddler Guard Rail
(SKU-846) to convert the crib
to toddler bed.

www.evolurbaby.com/help
3
CONVERSION MODES- FULL-SIZE BED ASSEMBLY
WITH FOOTBOARD
3a. In order to convert
the crib to Full-Size
bed, you must first
remove the
Footboard of the
crib.
3b. Remove the Mattress
Support Panel,
followed by Left and
Right Panels.
3c. Make sure to follow
the complete
instructions provided
with Bed Rails.
Bed Rails (NOT INCLUDED, SOLD SEPARATELY)
NOTE:
*Make sure to use the Evolur Bed
Rails (SKU-812) in order to
convert the crib to a Full-size Bed
with Foot board.
*Do not put the mattress directly
on the wooden slats, use either a
Bunky Board, Particleboard, or
low-profile Boxspring before
placing the mattress.
17

www.evolurbaby.com/help
FURNITURE CARE INSTRUCTIONS
ROOM CLIMATE CONTROL:
• Wood, when first cut contains more than 50 percent water. When it is
prepared for furniture construction it is placed in a Kiln and the
moisture content is brought down to 8 to 10 percent. Wood is porous
and responds to its environment. If the room has high humidity it will
absorb it and expand and if the humidity is low it will lose moisture and
shrink.
• It is important that the humidity levels in the room be controlled from
extremes of too much humidity or too little. Furniture should not be
placed close to air- conditioning outlets, fire places, radiators, space
heaters, humidifiers or dehumidifiers. Exposure to extreme variations
of temperature and humidity can damage any fine wood product.
THE IDEAL ENVIRONMENT FOR FINE FURNITURE:
• Fine wood furniture will have fewer problems when its environment is
controlled at a temperature between 65 and 75 degrees and a relative
humidity between 35 and 40 percent. Wood placed in an environment
out side of those limits can and will shrink or expand and may develop
some small cracks which are not material or structural defects.
STICKING DOORS AND DRAWERS:
• With the minor changes in temperature and humidity doors and
drawers may swell and be difficult to open or close. Tolerances have
been builtinto theunits but extreme conditions may still causesticking.
This will adjust back to normal over time but until it does consider
using a dehumidifier or rub candle wax or paraffin on sides that stick.
AVOID DIRECT SUNLIGHT:
• Keep the furniture out of direct sunlight. Ultraviolet rays will fade colors
and in some cases darken them. It can also cause crazing or hair line
cracks in the finish. White finishes will yellow naturally over time and
exposure to direct sunlight will hasten this natural process along with
some woods darkening naturally over time; this is not considered to be
a quality defect.
18

FURNITURE CARE INSTRUCTIONS (cont.)
www.evolurbaby.com/help
PROPER STORAGE:
• If you need to put your furniture in storage for any period of time do not
store them in a damp basement or hot dry attic. Allow air movement
around the furniture and do not stack anything on it.
IN GENERAL:
• Protect furniture surface from hot or extremely cold items.
• Use coasters under hot or cold beverages.
• Do not use synthetic fabric under accessories or lamps.
• Protect tops from pens, makers and crayons.
• Oils from potpourri and other scented items can damage the finish of
the furniture.
• Do not drag items across the surface of the furniture.
• Allow the surface to breath by rotating your accessories and lamps.
• Do not over polish the furniture, do it only two or three times a year.
Over polishing can distort the natural finish of the product.
• Do not wax the furniture as wax build up can destroy the natural finish
of the product.
• When moving furniture always lift the unit. Do not push or drag it to
avoid damage to legs.
• Keep the furniture level so doors and drawers open and close freely.
• Clean with a damp, not wet, cloth. Use only a mild soap. Do not use
abrasive cleaners.
• Do not scratch or chip the finish.
• Inspect the product periodically, contact Evolur Inc for replacement
parts or questions.
• Do not store the product or any parts in extreme temperatures and
conditions such as a hot attic or a damp, cold basement. These
extremes can cause a loss of structural integrity.
• To preserve the luster of the high-quality finish on your product, it is
recommended to place a doily or felt pad under any items you place
on the finish.
• Clean with a damp cloth, then a dry cloth to preserve the original luster
and beauty of this fine finish.
19

FURNITURE CARE INSTRUCTIONS (cont.)
www.evolurbaby.com/help
• Do not use abrasive chemicals.
• Do not spray cleaners directly onto furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• Use of a vaporizer near furniture will cause wood to swell and to peel.
YOU DID IT...!
Congratulations Mom & Dad !
It's time to create your dream nursery. A safe, elegant
handcrafted crib that grows with your little one.
20