Evolur Stellar User manual

Read all instructions before
assembling and using product.
IMPORTANT - Keep Instructions
for future use. 1121R4-EV387
Owner’s Manual
STELLAR
Bassinet & Bedside Sleeper
Scan the QR code to register your product
https://www.evolurbaby.com/customer-care/product-registration/

2www.evolurbaby.com/help
WARNINGS
• Read all the instructions before assembling and using the product.
• Assemble product according to manufacturer’s instructions for any of the uses
(bedside sleeper or bassinet).
• FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH. DO NOT USE THIS PRODUCT IF
YOU CANNOT EXACTLY FOLLOW THE INSTRUCTIONS THAT COME WITH IT.
THIS PRODUCT SHOULD BE FULLY ASSEMBLED PRIOR TO USE.
SUFFOCATION HAZARD:
Infants have suffocated:
• In gaps between extra padding and side of the bassinet.
• On soft bedding. Use only the pad provided by Evolur, never add a pillow,
comforter or any other mattress for padding.
• If a sheet is used with the pad, use only the one provided by Evolur or one
specifically designed to fit the dimension of the mattress pad.
• Never leave the infant in the bassinet with sides down unless it is securely
positioned in the sleeper mode attached to the adult bed with anchors securely
in the place.
• To reduce the risk of SIDS, pediatricians recommend healthy infants to be placed
on their backs to sleep, unless otherwise advised by your physician.
ENTRAPMENT HAZARD:
• To prevent death from entrapment, Bedside Sleeper must be properly secured to
adult bed using the attachment system.
• There must be no more than ½ inch (13mm) gap between bedside sleeper and
adult bed.
• Check tightness before each use by pulling bedside sleeper in a direction away
from adult bed.
• If gap exceeds 1/2 inch (13mm) DO NOT use product. DO NOT fill the gap with
pillows, blankets or other items that can cause suffocation.
• Always read and follow assembly instructions for each product use (bedside
sleeper or bassinet)
• Please use ALL the required parts for each use (bedside sleeper or bassinet).
FALL HAZARD:
• A bassinet is designed to provide a sleeping area for an infant until he or she
begins to push up on hands and knees or can roll over, or has reached 25lbs,
whichever comes first, which is about 5 months of age.
• Please use all required parts for each use mode (bedside sleeper or bassinet).

3
www.evolurbaby.com/help
WARNINGS (cont.)
• Check the instruction manual for a list of required parts.
• Periodically, check the product for loose, damaged, or missing parts. DO NOT
use product if any part is loose or missing, or if there are any signs of damage.
DO NOT substitute parts.
• Contact Evolur if replacement parts or instructions are needed.
• In Bassinet Mode, make sure that the side panel is locked.
• Strings can cause strangulation. NEVER place the product near window blinds or
patio doors with cords where a child could reach the cord and be strangled, or
hang strings over the product or place items with a string around an infant's neck
or attach strings to toys.
• DO NOT place any cord or strap or similar items in or near this product that
could be wrapped around a child's neck.
• Strings can cause strangulation. DO NOT place anything with a string around a
child's neck, such as hood strings or pacifier cords. DO NOT suspend strings
over a bassinet or cradle or attach strings to toys.
SUFFOCATION, ENTRAPTION AND FALL HAZARDS:
• To use the bassinet mode, ALWAYS raise the side with the zipper to completely
close up all 4 sides.
• ALWAYS push adult mattress against beside sleeper after securing to the bed
with safety strap and fixing the buckles.
• NEVER leave the infant in bassinet with the sides down.
• The bedside sleeper is designed for use with adult beds that are between
18.5-24 inches (47-60 cm) from floor to top of adult mattress.
NEVER use this product in
bedside sleeper mode without
fixing buckles securely
attached to the bed.
Acceptable bed
frame in-line.
Non-acceptable
bed frame not
in-line.

4www.evolurbaby.com/help
WARNINGS (cont.)
• Fixing or attaching the buckles and straps to adult bed must ALWAYS be done in
bedside sleeper mode. Product in bedside sleeper mode must be tightly
attached to adult bed mattress to ensure safe use.
• It is recommended to make the straps shorter than the width of the mattress to
ensure bedside sleeper is pressed securely and tightly against the adult bed,
without any gaps.
• A bedside sleeper is designed to provide a sleeping area for an infant until he or
she begins to push up on hands and knees or can roll over, or has reached 25lbs,
whichever comes first. Move your child to another sleeping product when your
child reaches this stage.
• DO NOT use the bedside sleeper if any parts are missing, damaged, or broken.
Contact Evolur for replacement parts and instructions.
• DO NOT substitute parts.
IMPORTANT FOR THE SAFETY OF YOUR CHILD
Co-Sleep Mode (Fixing to the Bed)
This method is only compatible with bed types that comply with all of the
conditions described here:
• The side support of the bedside sleeper should always be placed close to the
adult mattress.
• The mattress should always be aligned with the height of the side support of the
co- sleeper.
• The bedside sleeper should be firmly fixed to the structure of the adult bed or to
the mattress support.
• Check to make sure that the bedside sleeper in the bedside sleeper mode does
not interfere with the adult bed.
• During use, make sure that the adult bed sheets, blankets etc, do not enter the
bedside sleeper and cover the interior of the bedside sleeper. This can cause
suffocation.
• In the bedside sleeper mode, the two legs of the bedside sleeper should always
be adjusted to the same height
• Ensure that the fixing buckles are straight and not loose.
• When the bedside sleeper is attached/tied to the bed, that the actual bassinet
must remain straight and not lopsided. If the bassinet is not straight/flat, contact
our customer service immediately for help.
• The attachment must always be used in bedside sleeper mode.
• During the removal/or application of the lining, handle the fabric carefully in order
to avoid accidental damage or tears.

5
www.evolurbaby.com/help
…. for choosing Evolur and congratulations on joining our family;
a family that has been transforming lives for 30 years!
We appreciate your feedback and wish you the very best in the
coming years with your new addition. If you have any questions
or concerns please don’t hesitate to reach out to us. One of our
trusted Customer Care representatives will be happy to assist you.
Thank you again for entrusting us to supply you with safe,
and affordable baby products and accessories.
THANK YOU...
WARNINGS (cont.)
• Before every use, check to make sure that there is no space between the adult
mattress and the side of the bedside sleeper. If there is, pull the belts firmly to
tighten until there’s no space.
• Use of the product is only permitted for bed or mattress with straight sides. Do
not use the product with a round mattress or a water bed.
• When the product is used in the bedside sleeper mode, it should always be fitted
to the long side of the bed. Do not fix the product to the short side of the bed.
• The removal and/or application operations may take a few minutes and should
be carried out by adult.

6www.evolurbaby.com/help
PARTS
If there are any missing parts, please contact Evolur before using the product.
Frame, Legs and Fabric
A B Side Rail (×1)
Middle Support Frame (×1)
C D Fixing Belts (×2)
Travel Bag (×1)
E F Stabilizing Bar (×1)
Mattress Pad
G

7
www.evolurbaby.com/help
ASSEMBLY DETAILS
A1
A2
A3
A4
A5
A6
A2. Bar Lock Lever
A4. Adjustable feet rotate button
A6. Middle support frame release button
A1. Height adjuster button
A3. Adjustable feet
A5. Non-slip feet
A7. Fabric lining
A7

8www.evolurbaby.com/help
1
BASSINET ASSEMBLY
1a. Insert the Side Rail
(B) into the Middle
Support Frame (C) by
lining up the buttons
and holes until it
clicks into place as
shown in the diagram.
“Click”“Click”
1a (B)
(B,C)
(C)

9
www.evolurbaby.com/help
2
BASSINET ASSEMBLY
2a. Locate the part labelled as
(A6) in the image. Insert the
sides of Middle Support
Frame (C) into the part (A6)
on both the sides.
2b. Gently push it into the side
slots (A6) until it clicks into
place as shown. Also, make
sure that the side rail (B) is
facing upward as shown in
the diagram.
“Click”
2b
(B,C)
(A6)
2a
(B,C)
(A6)

10 www.evolurbaby.com/help
3
BASSINET ASSEMBLY
3a. Locate the tube slots on
both sides, insert the
Stabilizing Bar (F) and push
until it clicks into place as
shown in the diagram.
Tube slots
(F)

11
www.evolurbaby.com/help
4
BASSINET ASSEMBLY
4a. Locate the 5 loops of the
fabric and velcro the loops
underneath the Fabric Lining
(A7) as shown.

12 www.evolurbaby.com/help
5
BASSINET ASSEMBLY
5a. Locate the 2 remaining loops
underneath the bassinet and
velcro them to the middle
support Frame (C).
5a

13
www.evolurbaby.com/help
6
BASSINET ASSEMBLY
6a. Place the Mattress Pad (G)
into the bedside sleeper.
6a
1
(G)
1

14 www.evolurbaby.com/help
HEIGHT ADJUSTMENT AND ROTATION OF FEET
1. To raise or lower the
bassinet, press the height
adjustment buttons (A1) on
both sides of the bassinet
together.
2. Ensure that both the legs of
bassinet are of same height.
The base should NEVER be
inclined.
3. Rotate the adjustable feet
inwards as shown in the
diagram to make sure the
bedside sleeper is closer to
the parent’s bed in case the
bed used is a box bed.
1
2
“Press”

15
www.evolurbaby.com/help Bar Lock Lever
Top Bar
1
BEDSIDE SLEEPER MODE
1a. To use bassinet as a bedside
sleeper, unzip the sides of the
bedside sleeper completely.
1b. Slide the bar lock lever on the top
bar and lift the top bar out of the
grooves on both sides.
1a
1b

16 www.evolurbaby.com/help
2
BEDSIDE SLEEPER MODE
2a. Move the bedside sleeper
closer to parents’ bed to
check the height of bedside
sleeper. The unzipped side of
bedside sleeper should
always be closer to the
mattress. The mattress
should be always aligned to
the bedside sleeper.
2b. To avoid injury from the
infant’s neck being caught on
the top rail on the side that is
next to the parent’s bed, the
top rail must be no higher
than parent’s bed mattress.
2c. Pass the Fixing Belt (D) under
the bed to the other side and
pass it above the mattress by
pulling belts firmly until the
straps are in correct position
as shown in the diagram.
Tighten the Harness of the
Fixing Belt (D) until it clicks
into the place.
2d. Rotate the adjustable feet
inwards as shown in the
diagram to make sure the
bedside sleeper is closer to
the parent’s bed in case the
bed used is a box bed.
“Click”
(D)
(D)

17
www.evolurbaby.com/help
TRAVEL MODE
1. To fold and store the bassinet,
remove parts Side Rail (B), Fixing
belt (D), Stabilizing Bar (F) and
Middle Support Frame (C) and
adjust at the lowest position.
2. Place the mattress pad (G) on the
floor and place the Stabilizing
Bar (F) diagonally across as
shown in diagram.
3. Next, fold the Frame, legs and
fabric (A) and place it on top of
the mattress pad (G) and
Stabilizing Bar (F) as shown.
4. Next, place the parts Side Rail
(B) and Middle Frame (C) as
depicted in the diagram.
5. Next, stick the product into the
Travel Bag (E).
2
3
4
5

18 www.evolurbaby.com/help
SAFETY
1. The bedside sleeper is designed
for use with adult beds that are
between 18.5 - 24 inches (47 - 60
cm) from floor to top of adult
mattress.
2. NEVER use this product in
bedside sleeper mode without
fixing or attaching the buckles
securely to the adult bed. Lock
the wheels in place.

19
www.evolurbaby.com/help
CARE AND CLEANING
1. Remove the mattress pad and
release all the velcro loops
attached to the bassinet.
2. Unzip the zipper underneath the
fabric lip on the top frame. Pay
attention not to damage the
fabric.
1
2
1
(G)

20 www.evolurbaby.com/help
MAINTENANCE
• The product has a water resistant fabric cover which is completely removable
and washable.
• The removal/application activities should only. On a regular basis, check the
condition of the product for any possible damage. In case of damage, do not use
it and keep it out of the reach of children.
• For washing of the fabric, carefully comply with instructions indicated on the
label.
• For cleaning, do not use solvents, abrasive or aggressive products.
• After each wash, check the resistance of the fabric and of the stitching.
Hand wash in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
YOU DID IT!
It’s time to make a happy sleep for your little one in this sturdy,
multi-tasking and stylish Bassinet!