Evolur AMSTERDAM User manual

AMSTERDAM CHANGING TRAY
AI - 915-01
ASSEMBLY INSTRUCTIONS
Model shown is example only. Styles may vary
1

AI-915-01
Adult assembly required.
Small parts may present choking hazard prior to assembly.
that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills Or Drivers
To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth.
Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
ASSE M B LY I N S T RUCTIO N S -Instr u c t ion s pou r l 'assem b l a g e
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854, Customer Care: [phone]

AI-915-01 6
(NOT PROVIDED)
(NON FOURNI)
ASSE M B LY I N S T RUCTIO N S -Instr u c t ion s pou r l 'assem b l a g e
HARDWARE AND TOOL DIAGRAM
x 5 (1- 1/4’’)
A

AI-915-01 7
ASSE M B LY I N S T RUCTIO N S -Instr u c t ion s pou r l 'assem b l a g e
x 5 (1 - 1/4’’) A

AI-851-02
ÉVOLUR - 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854, Customer Care: [phone]
!WARNINGS
* READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TRAY OR CHANGING PAD
* KEEP ALL INSTRUCTIONS FOR FUTURE USE
* DO NOT USE THIS CHANING TRAY IF THERE ARE ANY LOOSE JOINTS,
MISSING OR BROKEN PARTS AND / OR SHARP EDGES . CONTACT
DREAM ON ME INC., 1532 S. WASHINGTON AVE, PISCATAWAY, NJ 08854
FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE. DO NOT
SUBSTITUTE PARTS OF ANY KIND
* WHEN CHILD REACHES A MAXIMUM WEIGHT OF 30 LBS, THE CHANGING TRAY
SHALL NO LONGER BE USED
5
FALL HAZARD - CHILDREN HAVE SUFFERED SERIOUS INJURIES AFTER
FALLING FROM CHANGING TABLE. FALLS CAN HAPPEN QUICKLY.
STAY WITHIN ARM’S REACH.
ALWAYS SECURE THIS UNIT TO THE CHANGING SURFACE OF DRESSER #885
OR #862 OR #833 ...BY DREAM ON ME INC.,(SOLD SEPARATELY) OR A SURFACE
THAT IS LEVEL, STABLE AND STRUCTURALLY SOUND WITH A MINIMUM
SURFACE DIMENSION OF 20” X 58” BY USING THE HARDWARE PROVIDED.
SEE INSTRUCTIONS
32 INCHESX17 INCHES AND NOT EXCEEDING 1 INCH IN THICKNESS.

Enter our monthly giveaway!
Simply scan the QRcode to register.
Chat with us!
For any questions or concerns or feedback.
Follow us on
to get your nursery featured on our social media.
@EvolurBaby @evolurbaby