Evolur aurora User manual

AURORA HUTCH - BOOKCASE
AI - 834_KD-00
ASSEMBLY INSTRUCTIONS
Model shown is example only. Styles may vary
1

AI-834_KD-00
Adult assembly required.
Small parts may present choking hazard prior to assembly.
that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills Or Drivers
To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth.
Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
ASSEMBLY I NSTRUCTION S -Instructionspourl'assembla g e
ÉVOLUR - 1532 S. WASHINGTON AVE , PISCATAWAY, NJ 08854, TEL: [phone]

BULLETIN # AI-834_KD-00
HARDWARE AND TOOL DIAGRAM
5
ASSEMBLY I NSTRUCTION S -Instructionspourl'assembla g e
X 2
D
F
x 4 (5/8 ”)
E
8 x (2-1/8”)
x 8
A B x 8
C

BULLETIN # AI-834_KD-00 6
ASSEMBLY I NSTRUCTION S -Instructionspourl'assembla g e
BOOKCASE CONVERSION (BIBLIOTHÈQUE DE CONVERSION)
8 x (2-1/8”)
A
x 8
B
x 8
C

BULLETIN # AI-834_KD-00
STEP (ÉTAPE) 1
6
ASSEMBLY I NSTRUCTION S -Instructionspourl'assembla g e
HUTCH CONVERSION (HUCHE CONVERSION)

BULLETIN # AI-834_KD-00
STEP (ÉTAPE) 2
7
ASSEMBLY I NSTRUCTION S -Instructionspourl'assembla g e
HUTCH CONVERSION (HUCHE CONVERSION)
X 2
D
x 4 (5/8 ”)
E
(NOT PROVIDED)
(NON COMMUNIQUÉE)