Evotech 11999 User manual

Installation Instructions

Installation Instructions
DUCATI MONSTER 1200 2014
TAIL TIDY
Product Reference - 11999
Kit Contents
1 x Main Mounting Bracket
A
1 x LH Arm
B
1 x RH Arm
C
1 x Licence Plate Holder
D
1 x Reflector and Bracket
E
1 x Cable Bracket (1200 Only)
F
1 x Licence Plate Light
G
2 x M5 - 50 Button Head Screws
K
2 x Indicator Mounting Plates
J
2 x M3 - 12 Button Head Screws
M
2 x Screw Head Caps
O
2 x Number Plates Screws and Nuts
N
1 x Wiring Connector Loom (1200 Only)
H
2 x Pair Bullet Connectors (1200 Only)
P
2 x Male Spade Connectors (821 Only)
Q
2 x Indicator Extension Wires (821 Only)
R
2 x M8 - 25 Button Head Screws (821 Only)
S
2 x M8 Mounting Spacers (821 Only)
T
2 x M8 Custom Washers (821 Only)
U
3 x M8 - 10 Button Head Screws (1200 Only)
V
3 x M6 Trunions
W
3 x M6 - 16 Countersink Screws
X
4 x Indicator Adapters
Y
4 x Mounting Bosses
Z
4 x M6 Custom Washers
AA
4 x M6 - 12 Button Head Screws
BB
6 x Cable Ties
CC
2 x Indicator Arms
I
2 x M5 - 12 Cap Head Bolt
L

Installation Instructions 1

Installation Instructions 2

Installation Instructions 3
V F
V
V

Installation Instructions 4

Installation Instructions 5
Caution
Carefully trace license plate
light cable back to the main loom.
Ensure any other cables that are
un-clipped are re-clipped once light
cable has been moved

Installation Instructions 6
Caution
Carefully re-route license plate
light cable along rear sub-frame.
Leave lose on top at this stage.

Installation Instructions 7

Installation Instructions 8

Installation Instructions 9

Installation Instructions 10

Installation Instructions 11

Installation Instructions 12

Installation Instructions 13
Caution
Move indicator wires over to
the left hand side of the bike.
Route the licence plate light
from stage 6 under sub-frame
to the same location as the
indicator wires.

Installation Instructions 14

Installation Instructions 15

Installation Instructions 16

Installation Instructions 17

Installation Instructions 18
Y
Y
Y
J
J
Y