RDMOTO S10 User manual

RDMOTO CZECH REPUBLIC
[email protected]
www.rdmoto.cz
1
S10
Suzuki GSX1400 2002-
Kit for the left side
Kit for the right side
No.
Description
Cat.no.
Pcs
No.
Description
Cat.no.
Pcs
1
Steel box M12
X2
1
1
Steel box M12
X2
1
2
Bolt M12x50mm
869
1
2
Bolt M12x50mm
869
1
3
Bolt M12x30mm
855
1
3
Bolt M12x30mm
855
1
4
Bolt M10x120mm
881
1
4
Bolt M10x110mm
879
1
5
Steel clamp M8
950
1
5
Steel clamp M8
950
1
6
Dural. cylinder d=48,5mm
50
1
6
Dural. cylinder d=42mm
49
1
7
Dural. cylinder d=70mm
412
1
7
Dural. cylinder d=50mm
283
1
8
Duralumin adapter
573
1
8
Duralumin adapter
574
1
9
Nut M8
951
2
9
Nut M8
951
2
10
Nut M10
814
1
10
Nut M10
814
1
11
Pad M8-spring
800
2
11
Pad M8-spring
800
2
12
Plastic cover M10
X4
1
12
Plastic cover M10
X4
1
13
Tape 3M
1
13
Tape 3M
1

RDMOTO CZECH REPUBLIC
[email protected]
www.rdmoto.cz
2
Installation –the left side:
1. remove the original bolt M10 before the engine
2. stick the tape 3M on the frame
3. take the duralumin adapter (No. 8) and use the bolt (No. 3) for mounting of
duralumin cylinder (No. 7)
4. give the bolt (No. 4) into the adapter, the other side of the adapter give the
duralumin cylinder (No. 6) on the bolt, this prepared adapter mount on the frame
(don’t tighten the bolt M10)
5. the other side of the frame of the motorcycle give the steel clamp (No. 5) into the
duralumin adapter, give the pad M8 (No. 11) and use the nuts (No. 9) for the
tightening of the adapter. Use the nut (No. 10) for the tightening of the bolt M10 too.
Give the plastic cover (No. 12) on the head of the bolt M10.
6. if the duralumin adapter is monted good together with the holder for the crash
protector, so you can mount the crash protector
7. give the steel box (No. 1) together with the bolt (No. 2) into the protector
8. all this set mount into the thread on the adapter
Warning –we recommend to use safety glue on threads of all bolts (moderate
strong –blue colour).

RDMOTO CZECH REPUBLIC
[email protected]
www.rdmoto.cz
3
Installation –the right side:
1. remove the original bolt M10 before the engine
2. stick the tape 3M on the frame
3. take the duralumin adapter (No. 8) and use the bolt (No. 3) for mounting of
duralumin cylinder (No. 7)
4. give the bolt (No. 4) into the adapter, the other side of the adapter give the
duralumin cylinder (No. 6) on the bolt, this prepared adapter mount on the frame
(don’t tighten the bolt M10)
5. the other side of the frame of the motorcycle give the steel clamp (No. 5) into the
duralumin adapter, give the pad M8 (No. 11) and use the nuts (No. 9) for the
tightening of the adapter. Use the nut (No. 10) for the tightening of the bolt M10 too.
Give the plastic cover (No. 12) on the head of the bolt M10.
6. if the duralumin adapter is monted good together with the holder for the crash
protector, so you can mount the crash protector
7. give the steel box (No. 1) together with the bolt (No. 2) into the protector
8. all this set mount into the thread on the adapter
Warning –we recommend to use safety glue on threads of all bolts (moderate
strong –blue colour).

RDMOTO CZECH REPUBLIC
[email protected]
www.rdmoto.cz
4