ewheels EW-01 User manual

0
EW-01
Owner’s Manual
www.ewheelsdealers.com
[phone] Customer Service
[phone] Service

1
Table of Contents
1. Feature Guide
2. Product Specifications
3. Handle Bar controls
4. Operating Instructions
5. Folding and Unfolding
6. Safety Requirements
7. Battery and Battery Charging
8. Care & Maintenance
9. Basic Trouble Shooting

2
Battery Voltage Parking Brake Seat Back Cushion
Throttle Key Ignition Reverse Switch
Tube Adjustor
Silver Button
Height Adjustment
Shock Absorbers
Front Tire
Telescopic Pull Handle
Foot Board
Battery
Rear Tires
Storage Luggage
Rack
Seat Frame

3
Technical Specifications
Model
EW-01 Speedy Scooter
Weight Capacity
300Lbs
Speed:
Up to 11mph
Distance:
30 miles per charge (distance varies on terrain, riders
weight, road surface, etc.)
Front Seat: Type
Folding/Collapsible Chair with Backrest
Front seat: Size
13 ½ “x 12 ½ “x 14”
Front Seat:
21 ½ “
Safe Gradient:
18°
Turning Radius
33”
Steering Height
30” from Ground
Rear Foot Rest:
N/A
Power:
Electric
Watts:
450 Watt
Motor Type:
Rear Wheel Hub Motor
Amps:
12 AH
Volts:
48 Volts
Dimensions:
37” x 22” x 33” Folded: 38” x 23” 22”
Floor Clearance:
3”
Front Basket:
8” x 8” x 10”
Batteries:
(1) Lithium Ion Battery 78 Cell with BMS
Forward/Reverse switch:
Yes
High/ Low Speed switch:
N/A
Front tire size:
7” tire type: 200 x 50
Rear tire size:
10” tire type: 10 x 2.125
Charger:
48-volt Smart Charger included
Throttle Type:
Variable Twist Throttle
Key Start:
Yes
Braking System:
Rear Drum Brakes
Drive System:
450 Watt Rear Hub Motor
Headlight:
N/A
Rear lights:
N/A
Carton Size:
Shipped fully assembled on pallet –48” x 30” x 34”
Scooter Weight:
69lbs with batteries
Battery Indicator:
Yes
Front:
Frame shock absorbers
Rear:
N/A
Reflectors:
Yes (rear only)
Warranty:
Limited –3 Year Warranty

4
Operation of Scooter:
1. Turning on the power
Put key in ignition and turn clockwise to turn key on. Turn-key counter-
clockwise to power off when you stop. (Fig a)
2. Speed Control
Speed is controlled by the black twist grip throttle. Twisting the throttle
grip towards you will increase the speed. Releasing the throttle grip will
reduce the speed. (Fig a)
3. Battery Voltage Indicator
The battery level indicator will show when the scooter is on. The battery
is 48 volts thus the battery indicator when full should read a minimum of
48 volts although often the battery voltage will read higher because many
batteries when fully charged will read greater than 48 volts. The battery
read out simply indicates the voltage remaining on the battery. (fig a)
(fig a)

5
4. Forward / Reverse
The forward/reverse switch is located on the left side of the handle grip.
Press switch R for Reverse and F for Forward. (Fig b)
Forward / Reverse
(Fig B)
5. Carrier Rack
Unscrew the (2) black turn knobs located directly beneath the rear of the
scooter underneath the carrier rack. Once knobs have been loosened, pull
the carrier rack away from the scooter for desired distance. Tighten the
(2) black turn knobs to lock the carrier in place.
6. Front Basket
Fasten the front basket of the scooter utilizing the basket connector
frame. (fig c)

6
(Fig C)
Folding Scooter
1. Fold the seat back cushion down until it rests on top of the seat cushion.
(fig d)
(Fig D)

7
2. Stand behind speedy and pull the black hand grip located under the seat
to the rear of the scooter towards you until the seat folds. CAUTION: Keep
all fingers away from seat bracket to avoid harm. (fig e)
(Fig e)
3. Pull the handlebar hand grip collapse mechanism towards the handgrip
until the handgrip lowers and folds. Repeat until both handgrips are
folded. (fig e)
4. Stand in front of the scooter and push the locking handlebar tube lever
toward the floorboard of the scooter. (fig f)
5. Stand in front of the scooter and push the handlebar tube silver lever
release located on the lower section of the handlebar tube towards the
floorboard of the scooter. CAUTION: Be sure to stand in front of the
scooter when lowering the handlebar tube to avoid being hit by the
handlebar tube when lowering. (fig f)
Hand grip

8
(Fig f)
6. Stand scooter upright vertical position and press the black button on top
of the black telescopic handle release to extend the telescopic pull
handle.
Unfolding Scooter (Please refer to the diagram on page 2)
1. Stand in front of the scooter and press the black button on top of the
telescopic pull handle to lower the telescopic extender.
i. Stand in front of the scooter pull front handlebar tube forward
2. Push the handlebar locking lever towards the steering tube until the lever
locks in place.
i. Raise the seat back cushion
ii. Stand behind the scooter place your hand just below the
bottom seat back cushion and pull the seat vertical straight up
until the seat bracket locks in place.
Locking handle bar
Silver lever release

9
iii. Stand in front of the scooter and raise each hand grip until
each handlebar grip locks in place.
iv. Adjust the handlebar tube to desired height by simply turning
the tube adjust counter clockwise. Press the silver button
located on the front of the handlebar tube to raise or lower
handlebar to desired position. Once desired handlebar height
is secured then turn the tube adjustor clockwise to lock the
handlebar in place.
Safety Requirements
Driving Surface
Speedy has the best stability under the normal driving conditions (dry, level
ground with concrete or asphalt) Extra care must be taken when riding on
other surfaces (grass, gravel etc.)
DO NOT exceed the specified climbing angle (0-18 degrees). Please read the
manual instruction completely before operation.
Check the physical condition before driving the scooter.
ALWAYS SLOW DOWN WHEN TURNING
Speedy can be used in short grass and hard gravel safely with caution.
Avoid driving in loose gravel, covered soil and sandstone.
Do not drive the scooter in unknown road conditions.
Speedy can ride over small obstacles within a certain height, but you must
minimize the speed and slowly drive over the obstacle.
Do not operate the scooter before you have fully read and understood
this manual.

10
Do not carry additional rider on the scooter, chassis or lap.
Do not operate under the influence of alcohol or drugs.
Ensure that the seat is fixed and fastened.
Slow down when operating on uneven or soft ground.
Do not park on slopes.
Changing the initial setting or refitting your scooter is forbidden.
Use caution when operating near busy streets, markets or shopping
centers. Do not operate in unsafe areas. Please consult local authorities
about the traffic rules for scooters.
Hold the handlebar with both hands and put both feet on the footboard
when operating.
Never sit on the Speedy in a moving vehicle
Do not exceed the maximum weight capacity of 300lbs. This weight
includes rider, accessories and baggage.
Do not reverse on uneven slopes or uneven ground; be careful when
passing over slopes
Never use the Speedy to go up and down stairs.
Never take the Speedy on an escalator.
Do not operate on frozen, slippery, or salty ground.
Never charge a frozen battery.

11
Battery Maintenance & Charging
Speedy is designed to use one maintenance free 48v/12AH lithium Ion Battery.
It comes with an easy to use 48V/12AH Charger.
Charge the battery completely before the first operation. Not charging
the battery completely prior to operating you Speedy for the first time
can cause damage to the battery.
Be sure key is in the off position before charging Speedy.
Take battery off charger if storing the Speedy for a long period.
Do not leave the charger plugged in for more than 8 hours at a time.
Charging your Speedy scooter
Turn off the Speedy scooter and remove the key.
Plug the charger into the rear of the battery
Plug AC power charger plug into household power outlet. Red light on the
charging block indicates power on and the unit is charging. The green light
means the battery is fully charged.
Unplug the charger when charging is complete.
Match the charger socket and charger plug properly. Do not force.
Guide to Safe and Long Lasting Battery
How does the charge work?
When the battery voltage is low, the battery charger outputs a large current to
charge the battery. When the battery voltage is near full, the battery charger
outputs a small current. When the battery is full, the battery charger will
output very little current. Once the charger turns green do not leave the
charger plugged in for more than two hours.

12
How does the indicator light (LED) on the charger block display?
There are (2) LED indicator lights on the charger block. The red light indicates
that the scooter is charging. The green light indicates the battery is fully
charged.
Can other chargers be used?
To charge safely and efficiently, use the charger supplied by the original
manufacturer only.
How often should you charge the battery?
The charge time depends on use.
If you’re operating the scooter once a week, then the battery should be
charged once a week
Be sure the battery is fully charged before operating.
How can you get the maximum operating distance?
Driving conditions such as hills, uneven and soft surfaces, temperature and user
weight will affect the distance or running time for battery life.
Methods of obtaining the maximum driving distance
Fully charge the battery before operating.
Maintain a constant speed when possible.
Only carry the necessities to reduce weight.
Avoid intermittent driving.

13
Please follow the steps below to improve the battery performance:
A new battery must be fully charged before using.
Low speeds are recommended for the first time. Do not travel too far
until you are familiar with the operation of the scooter and the battery.
Fully charge the battery after operating Speedy the second time.
The battery capacity will reach 100% and extend the driving time after
four to five hours charging and discharging.
How to store scooter and battery
Charge your battery fully before you store it.
Store your scooter and battery in warm, dry place.
Avoid storing the scooter in area with temperature variations.
Do not expose the scooter or battery to extreme temperatures.
Charge the scooter at least once every 30 days to maintain the battery.
If the battery is frozen, warm for several days before charging.
Damage may occur.
Maintenance
With care and regular maintenance, the Speedy is designed to provide years of
enjoyment. The following will keep your Speedy running at optimum levels.

14
Battery
Make sure battery is fully charged.
Store the battery in a dry environment.
Seat
Clean seat cover with clean, damp cloth.
Cleaning
A clean, damp, non-abrasive cloth works best to wash and clean the
Speedy.
Do not wash your Speedy with a water hose as this may create an
electrical short and damage the electrical system.
Wiring
Check all wire connections and wiring insulation for wear and damage
regularly. This includes the charger power cord.
Motor, Bearings and Transmission parts
These components have been lubricated and sealed by the factory, there
is no need to lubricate these parts.
Store in dry environment. Be sure electrical components avoid moisture.
If they encounter moisture, dry before use.

15
Basic Troubleshooting
Power stops while operating
Make sure battery is properly inserted.
Make sure battery is properly charged.
Slow speeds while driving
Make sure battery is fully charged.
If you continue to have trouble with your Speedy, contact E-Wheels Service
Department at: [phone]
To see Product video please visit:
https://youtu.be/MkTePJMWwdY