eXact PipeCut 170 User manual

PipeCut 170/170E/220E
System
EN Operating Instructions 5-16
patents: US 7,257,895, JP 4010941, EP 1301311, FI 108927, KR 10-0634113
Exact Tools Oy
Särkiniementie 5 B 64
00210 HELSINKI
FINLAND
Tel + 358 9 4366750
FAX + 358 9 43667550
[email protected]
www.exacttools.com

2
Exact PipeCut 170/170E/220E System
Blade information for Exact PipeCut saws
TCT (tungsten carbide tip) saw blades are for cutting steel, copper, aluminium and all kind of plastics.
TCT blades can be sharpened.
Cermet (ceramic alloy tip) saw blades are for cutting stainless steel, acid proof materials, steel,
copper, aluminium and all kind of plastics. Cermet blades can be sharpened.
Diamond blades are for cutting cast iron only. Diamond blades can not be sharpened.
170E/220E speed control recommendations:
Stainless steel 4
Steel 5
Cast-iron 6

3
A

4
Declaration of Conformity
We declare under our sole responsibility that the products described under “Technical Data” arein
conformity with the following standards or standardization documents: EN60745-1, EN60745-2-5,
EN55014-1, EN 55014-2, EN61000-3-2, EN61000-3-3 according to the provisions of thedirectives
2004/108/EC, 2006/42/EC.
For more information, please contact Exact Tools at the following address.
The technical file is available at the address underneath.
The person authorized to compile the thecnical file:
Mika Priha, R&D manager ([email protected])
Helsinki, 31.8.2012
Seppo Makkonen, Managing director
Exact Tools Oy
Särkiniementie 5 B 64
FI-00210 Helsinki
Finland

5
Contents
english

6
Information
english

7
Information
english

8
Safety
english

9
Safety
english

10
Safety
english

11
Operation
english

12
Operation
english

13
Operation
english

14
Operation
english

15
Maintenance, Environment, Guarantee
english
Guarantee
Warranty terms valid from 01.01.2015
If the Exact PipeCut Saw becomes unusable due
to material or manufacturing defects within the
Warranty Term at our discretion we will repair the
Exact PipeCut Saw or supply an entirely new or
factory reconditioned Exact PipeCut Saw at no
charge.
The Exact Tools Warranty Term is for 12 months from
date of purchase.
The Warranty is only valid if:
1.) Copy of a dated purchase receipt is returned
to the Authorized Warranty Repair Center or
has been uploaded to our website at the time
of warranty registration.
2.) The Exact PipeCut Saw has not been
misused.
3.) No attempt has been made by non-approved
persons to repair the saw.
4.) The Exact PipeCut Saw has been used in
accordance with the operating, safety, and
servicing instructions provide in the manual.
5.) The Exact PipeCut Saw has been delivered to
an Authorized Warranty Repair Center within
the term of the warranty.

16
Tips
english
Note: The Exact PipeCut Saw is to be shipped
to the Authorized Warranty Repair Center freight
prepaid. If the Exact PipeCut Saw is repaired
under Warranty the return shipment will be made
freight prepaid. If the Exact PipeCut Saw is not
repaired under Warranty the return shipment will
be made freight collect.
Please Note: The following items or services
are excluded from Warranty claims:
- Saw Blades
- Overload Protection Fuse
- Carbon Brushes
- Gripping Unit Wheels
- Blade Flange
- Attachment Flange
- Pulling Flange Washer
- Normal Wear and Tear
- Errors Due to Misuse or Accident
- Water, Fire and Physical Damage
- Power Cords
- Adjustment of Adjustment Wheel
Due to continuous product development,
the information in this instruction book may
change. We do not give separate notification
of changes.