eXact PipeCut P400 User manual

PipeCut P400 Plastic
EN Operating Instructions 5-16
patents: US 7,257,895, JP 4010941, EP 1301311, FI 108927, KR 10-0634113
Exact Tools Oy
Särkiniementie 5 B 64
00210 HELSINKI
FINLAND
Tel + 358 9 4366750
FAX + 358 9 43667550
[email protected]
www.exacttools.com

2
Exact PipeCut P400
Blade information for Exact PipeCut saws
There are two types of blades for Exact PipeCut P400 pipe saw:
1) TCT P150 blade is designed for cutting plastic pipes with P400 pipe saw. TCT blades can be
reshapened few times.
2) CutBevel blade is designed to cut and bevel plastic pipes in one process.
The bevelling blades can be turned around for to get new sharp cutting edge. There is also an
upgrade kit available to CutBevel. It contains one cutting blade and 8 pcs bevelling blades and the
screws needed to fix these blades to the blade body. By changeing these one gets a blade that
works like a new.

3
20.
A

4
Declaration of Conformity
We declare under our sole responsibility that the products described under “Technical Data” are in
conformity with the following standards or standardization documents: EN60745 according to the
provisions of the directives 2004/108/EC, 2006/42/EC.
For more information, please contact Exact Tools at the following address.
The technical file is available at the address underneath.
The person authorized to compile the thecnical file:
Mika Priha, R&D manager ([email protected])
Helsinki, 1.9.2011
Seppo Makkonen, Managing director
Exact Tools Oy
Särkiniementie 5 B 64
FI-00210 Helsinki
Finland

5
Contents Translation of the original instructions english

6
Information english
Pipecut P400
Pipecut P400

7
Information english

8
Safety english

9
Safety english

10
Safety english

11
Operation english

12
Operation english

13
Operation english

14
Operation, Maintenance english

15
Maintenance, Environment, Guarantee english
P400
Guarantee
Warranty terms valid from 01.01.2015
If the Exact PipeCut Saw becomes unusable
due to material or manufacturing defects within
the Warranty Term at our discretion we will
repair the Exact PipeCut Saw or supply an
entirely new or factory reconditioned Exact
PipeCut Saw at no charge.
Warranty Term
The Exact Tools Warranty Term is for 12 months
from date of purchase.
The Warranty is only valid if:
1.) Copy of a dated purchase receipt is returned
to the Authorized Warranty Repair Center or
has been uploaded to our website at the time
of warranty registration.
2.) The Exact PipeCut Saw has not been
misused.
3.) No attempt has been made by non-approved
persons to repair the saw.
4.) The Exact PipeCut Saw has been used in
accordance with the operating, safety, and
servicing instructions provide in the manual.
5.) The Exact PipeCut Saw has been delivered
to an Authorized Warranty Repair Center
within the term of the warranty.
Note: The Exact PipeCut Saw is to be shipped
to the Authorized Warranty Repair Center freight
prepaid. If the Exact PipeCut Saw is repaired
under Warranty the return shipment will be made
freight prepaid. If the Exact PipeCut Saw is not
repaired under Warranty the return shipment will
be made freight collect.

16
Tips english
Please Note: The following items or services
are excluded from Warranty claims:
- Saw Blades
- Overload Protection Fuse
- Carbon Brushes
- Gripping Unit Wheels
- Blade Flange
- Attachment Flange
- Pulling Flange Washer
- Normal Wear and Tear
- Errors Due to Misuse or Accident
- Water, Fire and Physical Damage
- Power Cords
- Adjustment of Adjustment Wheel
Due to continuous product development,
the information in this instruction book may
change. We do not give separate notification
of changes.