
4
4- OPERATION OF YOUR PEDESTAL FAN
TO ADJUST AIRFLOW UPWARD OR DOWNWARD: Tilt fan head to the desired angle.
Loosen THE POSITION SCREW first and then tighten THE KNOB . Tilt fan head to the
desired angle then firmly tighten THE POSITION SCREW first and then tighten THE
KNOB.
TO MAKE THE FAN OSCILLATE: Rotate the switch on the back of the fan head.
TO STOP THE FAN OSCILLATE: Rotate the switch on the back of the fan head.
SPEED CONTROL: Rotate THE SWITCH on the back of the fan head to 0, 1, 2 and 3
designates OFF, LOW, MEDIUM and HIGH speed respectively.
5- CARE AND CLEANING
WARNING: Unplug from electrical supply source before cleaning: Use soft damp cloth to
clean. Then wipe with a dry cloth.
Do not use a cleaning solution that is harmful to paints or plastics and Do not bend the
blades. The motor bearings are permanently sealed and do not require additional
lubrication
Ensure that the fan is switched off from the supply mains before removing the
guard.
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard
Please return to the place of purchase if the product is faulty.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given instruction concerning use of the
appliance by a responsible person.
Children should be supervised when product is in use, to ensure that they
do not play with the appliance.
For all Warranty Claims, please return to place of purchase. If unit is deemed to be
faulty, it will be replaced during the 12month warranty period.
Distributed in Australia by:
Honeyair Australia Pty Ltd.
ABN 86 008 764 341
78 Mallard Way, Cannington WA 6107