Gebesa OPTIMUS User manual

OPTIMUS
ASSEMBLY MANUAL
PANEL TO PANEL OPTIMUS
Questions?
Call Toll Free 1-844-2GEBESA or email [email protected]

PARTS
2
ASCEND | “L” SHAPE
OPTIMUS PANELS
2X PANEL 85”(A)

ASCEND | “L” SHAPE SCREWS
3
PRIME DESKG-CONNECT CREDENZAOPTIMUS PANELS
8X SCREW
5/16”X1”
8X PRESSURE
WASHER 5/16”
(M)
(O)16X WAHSER
5/16”
8X NUT
5/16”
(P) (N)

STEPS
4
ASCEND | “L” SHAPE
PRIME DESKG-CONNECT CREDENZA
2.Remove the tiles from the panel structure
Lift up the tile and then pull it out
1.Adjust the bulkhead levelers to 3/4-inch
OPTIMUS PANELS

STEPS
5
ASCEND | “L” SHAPE
3.
PRIME DESK
Using the wedges (M), (P), (N) and (O), assemble the panels
G-CONNECT CREDENZA
Put the tiles on the panel structure. Using the angle as is shown,
once the tile is colocated on the panel structure, throw it down.
4.
OPTIMUS PANELS

STEPS
6
ASCEND | “L” SHAPE
5.
PRIME DESKG-CONNECT CREDENZAOPTIMUS PANELS

Questions?
Call Toll Free 1-844-2GEBESA
or email [email protected]