ExpertDAQ EX-919 V Series User manual

EX-919xxV
User Manual
EX-919xxV Series User Manual TOPS CCC Technology CO., LTD.
0
EX-919xxV Series
10.1”, 12.1”, 15”, 15.6”, 17”, 19”, 21.5”, and 24”New Gen. IP66/IP69K
Stainless Steel Panel PC
User Manual
Release Date Revision
Jul. 2017 V1.2

EX-919xxV
User Manual
EX-919xxV Series User Manual TOPS CCC Technology CO., LTD.
1
Revision History
Reversion
Date
Description
0.1
2016/12/14
For Preliminary Release
0.2
2016/12/22
Update power consumption and net weight
1.0
2017/01/10
Official Version
1.1
2017/03/07
Revised VESA mounting size for 24”
1.2
2017/07/28
Add I/O drawing and definition

EX-919xxV
User Manual
EX-919xxV Series User Manual TOPS CCC Technology CO., LTD.
2
Warning!________________________
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Packing List
Electric Shock Hazard –Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.

EX-919xxV
User Manual
EX-919xxV Series User Manual TOPS CCC Technology CO., LTD.
3
Accessories (as ticked) included in this package are:
□Adaptor
□Driver & manual CD disc
□Other.___________________(please specify)

EX-919xxV
User Manual
EX-919xxV Series User Manual TOPS CCC Technology CO., LTD.
4
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
◆Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.

EX-919xxV
User Manual
EX-919xxV Series User Manual TOPS CCC Technology CO., LTD.
5
Table of Contents
Revision History…………………………………………………………………………………………………….1
Warning!/Caution/Disclaimer.................................................…………………………….…2
Packing List…………………………………….……………………………………………………………………..3
Safety Precautions…………………………………………………………………….…..……………………..4
Chapter 1 Getting Started
1.1 Features………………………..………………………...…………………………..7
1.2 Specifications…………………...………………………………………………….7
1.3 Dimensions………………………....…………………………………………….13
1.4 Brief Description of EX-919xxV Series………...……….……….……17
1.5 Yoke Mounting and VESA Mounting……………………………………18
Chapter 2 Hardware
2.1 Motherboard Introduction……………………...……………..………....19
2.2 Specifications…………………………..…………………………………………19
2.3 Jumpers and Connectors Location……………………………………...23
2.4 Jumpers Setting and Connectors…………………………………..……24
Chapter 3 BIOS Setup
3.1 Operations after POST Screen…...…….……...…………………………38
3.2 BIOS Setup Utility……………………………………………………………….38
3.3 Main Settings……………………………………..………………………………39
3.4 Advanced Settings……………………………………………………………...40
3.5 Chipset Settings……………………………………….………………………...48
3.6 Security Settings…………………………………………….…………………..50
3.7 Boot Settings…..………………………………………….……………………..51
3.8 Save & Exit Settings……………………………………..…………………....52
Chapter 4 Installation of Drivers
4.1 Intel (R) AtomTM SoC Chipset ………..……...………….………………55
4.2 Intel (R) VGA Chipset……………………………………………….……......58
4.3 Intel (R) LAN Driver………..………………………………………..………...62
4.4 Realtek ALC662 HD Audio Driver Installation………………………65
4.5 USB 3.0 Driver…………………………………………………………………….66
4.6 Com Driver…..…………………………………………………………………….69

EX-919xxV
User Manual
EX-919xxV Series User Manual TOPS CCC Technology CO., LTD.
6
Chapter 5 Touch Screen Installation
5.1 Windows 7/8.1/10 Universal Driver Installation for PenMount
6000 Series............................................................................72
5.2 Software Functions…………………………………………………………....81
Figures
Figure 1.1: Dimensions of EX-91910V………………………………….13
Figure 1.2: Dimensions of EX-91912V……..………..………………...13
Figure 1.3: Dimensions of EX-91915V….….……..……………………14
Figure 1.4: Dimensions of EX-91916V…….….……..…………………14
Figure 1.5: Dimensions of EX-91917V……..………..…………………15
Figure 1.6: Dimensions of EX-91919V…….……………………………15
Figure 1.7: Dimensions of EX-91921V…….…..……………………….16
Figure 1.8: Dimensions of EX-91924V.…….…….……………………..16
Figure 1.9: Front View and Touch on/off Button of EX-919xxV Series..17
Figure 1.10: Rear View of EX-919xxV Series………….……………..……...……17
Figure 1.11: Yoke Mounting of EX-919xxV Series………….…………………..18
Figure 1.12: VESA Mounting of EX-919xxV Series.................................18
Figure 2.1: Motherboard Dimensions………………………………………….…….22
Figure 2.2: Jumpers and Connectors Location-Board Top……………….….23
Figure 2.3: Jumpers and Connectors Location-Board Bottom…………..…23

EX-919xxV
User Manual
EX-919xxV Series User Manual TOPS CCC Technology CO., LTD.
7
Chapter 1 Getting Started
1.1 Features
10.1”/12.1”/15”/15.6”/17”/19”/21.5”/24”New Gen. stainless steel panel PC
Intel Celeron N2930 1.83GHz onboard processor
True flat front bezel design and grade 304 stainless steel enclosure (grade 316
for option)
IP66/IP69K rated with M12 connectors
Support resistive touch, projected capacitive touch, and glass
Touch on/off button on the side edge for hygienic cleaning
Support ergonomic versatile mounting: Yoke mounting / space-saving VESA
mounting
1.2 Specifications
EX-919xxV Series
System
CPU
Onboard Intel Celeron N2930(1.83GHz) Processor
Chipset
SoC
Memory
Onboard 4GB DDR 3L 1600 MHz/8GB (option)
RFID Module
RFID module design on the front side (option)
Outside IO Port –Standard M12 I/O Connector on the Rear Side
USB
1 x M12 for 2 x USB 2.0
USB1/2:
CN1
Pin Define
1
USB1 5V
3
D1-
4
D1+
7
GND
2
USB2 5V
5
D2-
6
D2+
8
GND
Serial/Parallel
1 x M12 for RS-232/422/485, Default RS-232

EX-919xxV
User Manual
EX-919xxV Series User Manual TOPS CCC Technology CO., LTD.
8
Pin Define
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
LAN
1 x M12 for LAN
LAN:
Pin Define
2
LAN1_0+
1
LAN1_0-
4
LAN1_1+
3
LAN1_1-
6
LAN1_2+
5
LAN1_2-
8
LAN1_3+
7
LAN1_3-
Power
1 x DC power input (9~36V) by M12
connector
Pin Define
1
NC
3
VCC
4
GND
Others
1 x Touch on/off button on the side
Option IO Port:
Option
2 x optional blank M12 connectors with waterproof cap for selecting two
from the following options:
2 x USB 2.0 via TB-528U2
1 x USB 3.0 via cable

EX-919xxV
User Manual
EX-919xxV Series User Manual TOPS CCC Technology CO., LTD.
9
1 x LAN via cable
1 x COM Port via converter board
1 x CAN via converter board
1 x POE via converter board
Storage Space
Storage
1 x 2.5”HDD/SSD
Movable Device
1 x SD slot
Expansion
Expansion Slot
1 x Mini PCIe slot for WIFI/BT (option)
Touch Screen
Type
Resistive touch window (for R model) (not available for EX-91924V)
Projected capacitive touch screen (for P model)
Interface
USB
Light Transmission
Resistive touch window: over 80%
Projected capacitive touch screen: over 90%
Glass Type
Type
AR
Light Transmission
Over 90%
Power
Power Input
DC 9~36V
Mechanical
Color
304 Stainless steel enclosure (default)
316 Stainless steel enclosure (option)
Construction
Stainless steel enclosure
IP Rating
IP66/IP69K
Environmental
Operating
temperature
-20~60°C (for 10.1”~15”and 17”model)
0~50°C (for 15.6”, and 19”~24”model)
Storage temperature
-30~70°C
Storage humidity
10 to 90% @ 40°C, non- condensing
Certification
CE / FCC Class A
Operating System
Support
Windows 7 Embedded Enterprise,
Windows Embedded Standard 7,
Windows Embedded 8.1 Pro,
Windows Embedded 8.1 Industry Pro,
Windows 10 IoT 2016