Exterrain TURON AIR 2 User manual

2 Man Tent
Model No. TURON AIR 2
USER MANUAL
For safety and care of this product,
please read this user manual carefully before initial use
eXterrain reserves the right to revise the manual at any time. Information and specifications within this manual
are subject to change without notice. eXterrain assumes no liability or responsibility for any errors or
omissions. Please consult eXterrain for any clarification or information regarding this item.

Packaging:
Please ensure that the following items are included in your package:
-1 x Tent
- Storage/carry bag
- 8 x Iron pegs
- 4 x two-way alloy pegs
- 8 x glow in the dark rings
- Peg storage bag
- 4 x Glow in the dark guy ropes attached to tent
- Manual Pump - 2L per stroke
- 1 x repair patch
Dimensions:
3050mm
1250mm
1100mm

Instructions
Choose a flat surface to pitch tent. Remove the tent from the carry bag.
Inflating
1. Lay and unfold the 2 person tent evenly and peg down base of tent using iron pegs..
2. Screw on all main valves properly.
3. Unscrew cap to pump.
4. Begin to inflate tent at valve points using manual pump provided.
5. Pump tent making sure to lift the pump handle to its full extension and its complete
close. Until tent is fully inflated, assist air poles. DO NOT over inflate –pump only
enough air to hold tent up.
6. Screw cap on valve point/s.
7. Place 2 glow rings on alloy pegs.
8. Unroll guy ropes at all points and peg them down using alloy pegs on a 45˚ angle.
9. Tighten, but do not over tighten guy ropes; this can lead to the distortion of the tents’
shape.

Deflating
1. Un-zip all windows and doors –this will help to allow
removal of air quicker.
2. Remove and wipe clean all two-way alloy pegs from guy
ropes at all points and place in small storage bag.
3. Roll up guy ropes.
4. Deflate tent by unscrewing the cap on the valves –tent
will collapse.
5. Remove and clean iron pegs from tent.
6. (Front facing) Fold tent to one third point from right to left and gently push the
remaining air out as you fold.
7. Fold over last third point continuing to press air out.
8. Roll tent from front to back until tent is small enough to fit into storage/carry bag.
IMPORTANT TO NOTE: Please ensure that all contents are cleaned and stored in carry bag
AIR DRY to avoid build up of mould and degradation of tent. Instructions for care of tent can
be found on our website.

Specifications
Flysheet:
-Polyester 230T
-3000 PU Waterproofing
-Fire Retardant
-Dust Proof
-Strong Thermal Performance
-Aging Resistant
Floor:
-Oxford 210D, 105g/sqm
-2000 PU Waterproofing
Poles:
-TPU: Thermoplastic Polyurethane
-65mm Diameter
-600D Oxford Inner Pole Fabric
-Valves (x 2)
Window & Door:
-40g/sqm Mesh
-PVC Clear
-Pockets (x 2)

Features:
-This tent has a 3 layer puncture resistant design on air poles
-Peak Height: 1.1m
-Power Cord Inlet hole
-Zippers include tags for easy use
-Alloy pegs with glow rings
-Glow in the dark guy rope
-Manual Pump: High capacity with low pressure manual pump inflating at 2L per
stroke
-Pegs: Iron pegs (x 8 - base of tent); two way alloy pegs (x 4 - rope points)
-Carry Bag
-Repair Patch
Warranty
Please contact your authorised eXterrain reseller for any warranty queries. All eXterrain
Turon AIR range tents come with 12 months warranty.
Any reported defects that do not affect the operational aspects of the tent will not be
considered under warranty.

Other air tents from the Turon AIR range include:
TURON AIR 4
TURON AIR 6