
Specifications — USP 405, cont’d
Extron USP 405 Universal Signal Processor • Specications
2
Nominal level �������������������������������� 1 Vp-p for Y of component video and S-video, and for composite video
0�7 Vp-p for RGB and for R-Y and B-Y of component video
0�3 Vp-p for C of S-video
Minimum/maximum levels�������� 0 V to 2�0 Vp-p
Impedance�������������������������������������� 75 ohms
Scaled resolutions�������������������������� 640x4801,3,4,6, 800x6001,3,4,6, 832x6243,4,6, 848x4803,6, 852x4803,6, 1024x7681,3,4,5,6,
1280x7682,6, 1280x10241,3,6, 1360x7653,6, 1365x10243,6, 1400x10501,3,6, 576p1,6,
720p3,6, 1080p3,6, 1080i1,3,6, NTSC, PAL
1= at 50 Hz, 2= at 56 Hz, 3= at 60 Hz, 4= at 75 Hz, 5 = at 85 Hz,
6 = locked to the current input's vertical refresh rate (up to 60 Hz) (Accu-
RATE Frame Lock)
Return loss�������������������������������������� -30 dB @ 5 MHz
DC offset����������������������������������������� These data are for output with input at 0 offset:
±25 mV maximum for RGB
350 ±25 mV maximum for Y of component video/S-video, composite video
650 ±25 mV maximum for R-Y & B-Y of component video, C of S-video
Switching type������������������������������� Triple-Action
Sync
Input type��������������������������������������� Autodetect (RGBHV, RGBS, RGsB), and component
Output type������������������������������������ RGBHV, RGBS, and component video (tri-level or bi-level)
Standards���������������������������������������� NTSC 3�58, NTSC 4�43, PAL, and SECAM
Input level �������������������������������������� 2�75 V to 5�0 Vp-p for RGBHV or RGBS
0�6 Vp-p for component video tri-level sync
0�3 Vp-p for component video bi-level sync or RGsB
Output level����������������������������������� TTL: 5�0 Vp-p, unterminated, bi-level or tri-level
Input impedance ��������������������������� 510 ohms
Output impedance������������������������ 75 ohms
Max� input voltage������������������������ 5 Vp-p
Polarity�������������������������������������������� Positive or negative (selectable)
Control/remote — switcher/scaler
Serial control port�������������������������� RS-232, 9-pin female D connector
Baud rate and protocol����������������� 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations� 2 = TX, 3 = RX, 5 = GND
Contact closure������������������������������ 9-pin female D connector
Contact closure pin configurations� 1 = input 1, 4 = input 2, 6 = input 3, 7 = input 4, 8 = input 5
IR controller module��������������������� IR 801 (optional)
Program control����������������������������� Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™)
General
Power���������������������������������������������� 100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal
Temperature/humidity���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +3 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ������������������������������������������� Convection, vents on sides
Mounting
Rack mount������������������������ Yes
Enclosure type ������������������������������� Metal
Enclosure dimensions������������������� 1�8" H x 17�5" W x 12�0" D (1U high, full rack wide)
(4�6 cm H x 44�4 cm W x 30�5 cm D)
(Depth excludes connectors and knobs� Width excludes rack ears�)