Extron electronics DTP2 CrossPoint 82 User manual

User Guide
DTP2 CrossPoint 82
Scalers
Scaling Presentation Switchers
68-3438-01 Rev. A
03 20

Safety Instructions
Safety Instructions • English
WARNING:This symbol, , when used on the product, is intended to
alert the user of the presence of uninsulated dangerous voltage within the
product’s enclosure that may present a risk of electric shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf
aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes
gefährliche Spannungen herrschen, die nicht isoliert sind und die einen
elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire
l’utente della presenza di importanti istruzioni di funzionamento e
manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
I


Copyright
© 2020 Extron Electronics. All rights reserved. www.extron.com
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks (®), registered service marks (SM), and trademarks (TM) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
Registered Trademarks (®)
Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free. Global
Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,
MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, ShareLink, Show Me, SoundField, SpeedMount, SpeedSwitch,
StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XPA, XTP,
XTPSystems, and ZipClip
Registered Service Mark(SM) : S3 Service Support Solutions
Trademarks (™)
AAP, AFL (Accu-RATEFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, AVEdge, CableCover, CDRS(ClassD
Ripple Suppression), Codec Connect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, Everlast, FastBite, Flex55, FOX, FOXBOX, IP Intercom
HelpDesk, MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), RoomAgent,
Scope-Trigger, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, True8K, Vector™ 4K, WebShare, XTRA,
and ZipCaddy

FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference. This interference must be corrected at the expense of the user.
ATTENTION:
• The Twisted Pair Extension technology works with unshielded twisted pair (UTP)
or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE
compliance, STP cables and STP Connectors are required.
• La technologie extension paires torsadées fonctionne avec les câbles paires
torsadées blindées(UTP) ou non blindées(STP). Afin de s’assurer de la
compatibilité entre FCC ClasseA et CE, les câbles STP et les connecteurs STP
sont nécessaires.
NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and Regulatory
Compliance Guide on the Extron website.
VCCI-A Notice
この装置は、クラスＡ情報技術装置です。 この装置を家庭環境で使用すると、電波妨害を引き
起こすことがあります。 その場合には使用者が適切な対策を講ずるよう要求されることがあります。
ＶＣＣI－Ａ
Battery Notice
This product contains a battery. Do not open the unit to replace the battery. If the
battery needs replacing, return the entire unit to Extron (for the correct address, see the
Extron Warranty section on the last page of this guide).
CAUTION: Risk of explosion. Do not replace the battery with an incorrect type. Dispose
of used batteries according to the instructions.
ATTENTION : Risque d’explosion. Ne pas remplacer la pile par le mauvais type de pile.
Débarrassez-vous des piles usagées selon le mode d’emploi.

Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
CAUTION: Risk of minor personal injury.
ATTENTION : Risque de blessuremineure.
ATTENTION:
• Risk of property damage.
• Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&*X2)*X2#*X2! CE}
NOTE: For commands and examples of computer or device responses used in this
guide, the character “0” is the number zero and “O” is the capital letter “o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

viiDTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Contents
Contents
Introduction ................................................... 1
About this Guide................................................. 1
Product Description............................................ 1
Models ........................................................... 2
Integrated Digital Twisted Pair Extension......... 2
Audio Integration Capabilities and Available
Power Amplifiers............................................ 3
Features ............................................................. 3
Setup and Configuration Methods .................... 10
Application Diagrams........................................ 11
Installation ................................................... 13
Installation Overview ......................................... 13
Rear Panel Connections ................................... 14
Connection Details ........................................... 20
Analog Audio Connections ........................... 20
HDMI Connections ....................................... 21
Twisted Pair Recommendations for DTP, XTP,
and HDBT Communication.............................. 23
Operation ..................................................... 24
Front Panel Overview........................................ 24
Powering Up .................................................... 26
Selecting an Input............................................. 27
Using the On-Screen Menu System.................. 27
Menu Selection Buttons................................ 27
Menu Overview............................................. 28
Using the Menu Screens............................... 29
Device Info Screen........................................ 30
Quick Setup Submenu.................................. 31
Picture Controls Submenu............................ 32
Input Submenu............................................. 34
Output Submenu.......................................... 37
Audio Submenu............................................ 40
Advanced Submenu ..................................... 42
Communications Submenu .......................... 45
Front Panel Lockout (Executive Modes) ............ 46
Presets............................................................. 46
Input Presets ................................................ 46
Tie Presets ................................................... 47
Power Save Modes .......................................... 47
Reset Modes.................................................... 47
RS-232 and IR Signal Insertion......................... 49
Ethernet to RS-232 Insertion ........................ 50
Captive Screw IR Signal Insertion ................. 51
SIS Configuration and Control........................ 53
Host and Switcher Communication .................. 53
Copyright Messages..................................... 53
Password Messages .................................... 54
Switcher-initiated Messages ......................... 54
Error Responses........................................... 55
SIS Overview.................................................... 55
Using the Command and Response
Tables.......................................................... 55
Symbol Definitions ........................................ 56
Command and Response Tables for SIS
Commands ..................................................... 64
Audio Group Master SIS Commands............ 86
Audio DSP SIS Commands .......................... 89
CEC SIS Commands ................................... 91
Configuration Software..................................... 94
Software Installation.......................................... 94
Software Download Center Page.................. 94
Software Connection........................................ 96
Device Discovery Panel................................. 96
TCP/IP Panel................................................ 97
Offline Device Preview................................... 98
Software Overview............................................ 99
Software Menu ............................................. 99
Device Menu............................................... 102

DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Contents viii
Internal Web Page............................................ 104
Accessing the Web Page................................ 104
Disabling Compatibility Mode...................... 105
Web Page Components ................................. 105
Device Info Panel........................................ 106
Inputs Panel................................................ 106
Roles and Permissions Panel...................... 107
Device Status Panel.................................... 109
Outputs Panel............................................. 110
Firmware Panel........................................... 111
Network Settings Panel .............................. 112
RS-232 Panel............................................. 112
Reference Information ............................. 113
Mounting........................................................ 113
Tabletop Mounting...................................... 113
Rack Mounting ........................................... 113
Downloading Updated Firmware..................... 114
Licensed Third-Party Software Used in the
Switchers ...................................................... 115

DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Introduction 1
Introduction
This section provides general information about this guide and the Extron
DTP2 CrossPoint 82 switchers. Topics in this section include:
• About this Guide
• Product Description
• Features
• Setup and Configuration Methods
• Application Diagrams
About this Guide
This guide describes how to install, operate, and configure the DTP2 CrossPoint 82
Seamless Scaling Presentation Matrix Switchers.
In this guide, the model names as listed on the next page refer to specific DTP2
CrossPoint 82 models. The terms “switcher” and “matrix switcher” are used interchangeably
to refer to any of the DTP2 CrossPoint 82 models.
The following terms refer to groups of DTP2 CrossPoint 82 models:
• “Base model” refers to the basic DTP2 CrossPoint 82 containing no amplifier module.
• “Amplifier models” and “IPCP models” refer to DTP2 CrossPoint 82 IPCP SA and the
DTP2 CrossPoint 82 IPCP MA 70 models.
Product Description
The Extron DTP2 CrossPoint 82 switchers are eight-input seamless scaling presentation
matrix switchers that support video input signal resolutions up to 4K @ 60 Hz at 4:4:4,
and output signals up to 4K @ 30 Hz. All models incorporate Extron-patented Vector 4K
seamless scaling technology engineered for the most demanding applications. They feature
DisplayPort, HDMI, and DTP2 inputs, an HDMI output, and a scaled DTP2 output extension
to send video, audio, and control signals up to 330 feet (100 meters) over a shielded CATx
cable.
The DTP2 CrossPoint 82 switchers deliver excellent image quality, fast and reliable
automatic switching, Extron ProDSP audio processing (including audio embedding and
de-embedding, and Mic/Line mixing with ducking, feedback suppression, and Phantom
power), Extron ProDSP audio configuration, seamless video transition effects, logo keying,
and HDMI loop-out. The switchers can be controlled and configured via Ethernet, RS-232,
or USB.
The DTP2 CrossPoint 82 IPCP SA and IPCP MA 70 models each have a built-in Extron
IPCP Pro 355M Control Processor, and an integrated class D power amplifier.
• DTP2 CrossPoint 82 IPCP SA supports stereo audio output from a 2 x 25 watts
amplifier.
• DTP2 CrossPoint 82 IPCP MA 70 supports mono audio output from a 100 watts
amplifier.

DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • Introduction 2
Models
The presentation switchers are available in the following models:
Model Description Inputs Outputs
DTP2 CrossPoint 82 Base model
1U high
1 DisplayPort
5 HDMI
2 DTP2/XTP
1 HDMI
1 DTP2/XTP/HDBT
1 HDMI Loop Out
DTP2 CrossPoint 82
IPCP SA
Stereo amplifier
model
2U high
1 DisplayPort
5 HDMI
2 DTP2/XTP
1 HDMI
1 DTP2/XTP/HDBT
1 HDMI Loop Out
DTP2 CrossPoint 82
IPCP MA 70
70 V mono
amplifier model
2U high
1 DisplayPort
5 HDMI
2 DTP2/XTP
1 HDMI
1 DTP2/XTP/HDBT
1 HDMI Loop Out
Integrated Digital Twisted Pair Extension
The DTP2/XTP inputs and DTP2/XTP/HDBT outputs are proprietary signals that are created
within any of the Extron DTP Extender systems and transmitted over a single shielded
twisted pair (STP) cable.
Depending on the range of the transmitting or receiving device, the twisted pair (TP)
inputs and outputs can each travel up to 330 feet (100 meters) without a loss of signal
integrity. They also support IR (output only) and RS-232 insertion, and dedicated universal
asynchronous receivers and transmitters (UARTs).
Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is
recommended for optimal performance.
NOTE: Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for
optimal performance.
• Input —The DTP2 CrossPoint 82 can receive signals from a remote DTP or DTP2
transmitter (such as the DTP T USW 333) at a conference table, lectern, or wall. It can
also be integrated into an XTP CrossPoint matrix switcher system.
• Output —The DTP2 CrossPoint 82 can transmit to a DTP or DTP2, XTP, or HDBaseT
receiver or directly to an HDBaseT enabled display device. It can also be integrated into
an XTP CrossPoint matrix switcher system.
• Power over DTP —The DTP2 CrossPoint 82 can send power to selected DTP or
DTP2 endpoints over the same shielded CATxcable, streamlining system design and
installation.
DTP transmitters and receivers are available in compact, low-profile enclosures, and in
decorator-style wallplate and floorbox versions to suit the installation requirements of a
specific application.
RS-232 and IR signal insertion
The DTP2 inputs and output support bidirectional Ethernet to RS-232 insertion. Ethernet
insertion allows you to employ Ethernet drivers from either the local controller (IPCP models
only) or an external controller connected on the IP network.
IR output signals can be inserted from a control system and transmitted over the single
shielded CATx cable together with the video and audio, enabling control of a display.