Extron electronics SW 2 RGB User manual

1-2 SW2 RGB • Specifications
Video
Gain ............................................... Unity
Bandwidth .................................... 350 MHz (-3dB)
Video input
Number/signal type ................... 2 RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... 2 x 5 BNC female
Minimum/maximum levels ...... Analog ....... 0.4V to 1.2V p-p with no offset at unity gain
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 135 kHz
Vertical frequency ....................... 30 Hz to 170 Hz
Video output
Number/signal type ................... 1 RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... 5 BNC female
Minimum/maximum levels ...... Analog ....... 0.4V to 1.2V p-p
Impedance .................................... 75 ohms
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. RGBHV, RGBS, RGsB, RsGsBs
Standards ...................................... NTSC, PAL, SECAM
Input level ..................................... 1V to 5V p-p
Output level .................................. 5V p-p
Input impedance .......................... 510 ohms
Output impedance ...................... 75 ohms
Polarity .......................................... Positive or negative (follows input)
Control/remote — switcher
Contact closure ............................ 9-pin female D connector
Contact closure pin configurations 1 = input 1, 2 = input 2, 8 = ground
General
Power............................................. 100VAC to 240VAC, 50/60 Hz, 10 watts, internal, auto-switchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount ................................... Yes (1U high, ½-rack width), with optional shelf
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.75" H x 8.75" W x 9.5" D
4.4 cm H x 22.2 cm W x 24.1 cm D
(Depth excludes connectors.)
Shipping weight ........................... 5 lbs (2.3 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)
Approvals ..................................... UL, CUL, CE
MTBF ............................................. 30,000 hours
Warranty ....................................... 2 years parts and labor
Specifications are subject to change without notice.
(7.2-050301-D1)
Specifications — SW2 RGB Switcher