SW2 VGA DA2 VGA Switcher Series
computer & rGB SwItcherS
controL / remote
—
Switcher
Contact closure ............ Momentary, on a 3.5 mm captive screw connector
Contact closure pin
configurations ............. 1 = Input #1, 2 = Input #2
GenerAL
Power
SW2 VGA DA2 A/AF’s
external power supply ........ 100 VAC to 240 VAC, 50/60 Hz, external, universal; to 12 VDC,
1 A power supply, regulated
SW2 VGA DA2 A/AF’s
power input requirements ..... 12 VDC, 0.2 A
SW2 VGA DA2 AF R.......... 100 VAC to 240 VAC, 50/60 Hz, 12 watts, internal, universal
Temperature/ Humidity...... Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount
SW2 VGA DA2 A/AF ......... Yes, with optional 1U, 9.5" deep rack shelf, part #60-190-01 (RSU 129) or
60-604-01 (RSB 129); 1U, 6" deep rack shelf, part #60-190-10 (RSU 126)
or 60-604-10 (RSB 126); or VersaTools® 1U, 3.5" deep rack shelf,
part #60-190-20 (RSV 123) or 60-604-20 (RSB 123)
Furniture mountable with included under-desk mounting kit, part #70-077-01
(MBU 125)
Attachable to a projector mount with optional PMK 200 projector mount kit,
part #70-077-04
SW2 VGA DA2 AF R.......... Yes, with included rack mounting kit, part #70-485-01 (MBD 123)
Furniture mountable with optional VersaTools under-desk mounting kit,
part #70-212-01 (MBU 123)
Enclosure type............. Metal
Enclosure dimensions
SW2 VGA DA2 A/AF ......... 1.0" H x 8.75" W x 3.0" D
2.5 cm H x 22.2 cm W x 7.6 cm D
(Depth excludes connectors.)
SW2 VGA DA2 AF R.......... 1.75" H x 17.4" W x 3.0" D (1U high, full rack wide)
4.4 cm H x 44.2 cm W x 7.6 cm D
(Depth excludes connectors.)
Product weight
SW2 VGA DA2 A/AF ......... 1.1 lbs (0.5 kg)
SW2 VGA DA2 AF R.......... 2.6 lbs (1.2 kg)
Shipping weight
SW2 VGA DA2 A/AF ......... 4 lbs (2 kg)
SW2 VGA DA2 AF R.......... 7 lbs (4 kg)
Vibration.................. ISTA 1A in carton (International Safe Transit Association)
Listings................... UL, CUL
Compliances .............. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF..................... 30,000 hours
Warranty.................. 3 years parts and labor
NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.
SPeciFicAtionS
Video
Gain...................... Unity
Bandwidth ................ 300 MHz (-3 dB)
Video inPut
Number / Signal type ....... 2 VGA-UXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video*
Connectors................ 2 VGA female 15-pin HD
Nominal level.............. 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum / Maximum levels . Analog: 0.3 V to 1.5 Vp-p with no offset
Impedance ................ 75 ohms
Horizontal frequency........ 15 kHz to 145 kHz
Vertical frequency .......... 30 Hz to 170 Hz
Video outPut
Number / Signal type ....... 2 buffered VGA-UXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video*
Connectors................ 2 VGA 15-pin HD female
Nominal level.............. 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum / Maximum levels . 0.4 V to 1.8 Vp-p (follows input)
Impedance ................ 75 ohms
NOTE: *RGsB and RsGsBs inputs and outputs will work in manual mode only. Autoswitching requires TTL level sync on
pin 13 of the 15-pin HD connector.
Sync
Input type ................. RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync
Output type ............... RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync
Input level ................ 1.7 V to 5.0 Vp-p
Output level ............... TTL: 5.0 Vp-p, unterminated
Input impedance ........... 510 ohms
Output impedance.......... 50 ohms
Max. input voltage ......... 5.0 Vp-p
Max. Rise / Fall time........ 40 ns
Polarity ................... Positive or negative (follows input)
Audio
Gain...................... Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ........ 20 Hz to 20 kHz, ±0.05 dB
THD + Noise............... 0.03% @ 1 kHz at nominal level
S/N ...................... >90 dB at maximum output (unweighted)
Crosstalk ................. <-65 dB @ 20 kHz, <-80 dB @ 1 kHz and below 60 Hz
Stereo channel separation. . . >80 dB @ 1 kHz
CMRR .................... >75 dB @ 20 Hz to 20 kHz
Audio inPut
Number / Signal type ....... 2 stereo, unbalanced
Connectors................ (2) 3.5 mm female stereo jacks
Impedance ................ >10k ohms, balanced/unbalanced, AC coupled
Nominal level.............. -10 dBV (316 mVrms)
Maximum level ............ +8 dBV, (balanced or unbalanced) at 1% THD+N
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio outPut
Number / Signal type ....... 1 stereo, balanced/unbalanced
Connectors................ (1) 3.5 mm captive screw connector, 5 pole
Impedance ................ 50 ohms unbalanced, 100 ohms balanced
Gain error ................. ±0.1 dB channel to channel
Nominal level.............. -2 dBu balanced, -10 dBV (316 mVrms) unbalanced
Maximum level (Hi-Z) ....... >+16 dBu, balanced; >+8 dBV, unbalanced at 1% THD+N
Maximum level (600 ohm) . . . >+10 dBm, balanced; >+4 dBV, unbalanced at 1% THD+N
249