EZ-Guide®500 Lightbar Guidance System
Quick Reference Card
www.EZ-Guide.com
EZ-Guide®500 Lightbar Guidance System
Quick Reference Card
www.EZ-Guide.com
EZ-Guide®500 Lightbar Guidance System
Quick Reference Card
www.EZ-Guide.com
© 2007. Trimble Navigation Limited. All rights reserved. Trimble,
Ag
GPS, EZ-Guide, and EZ-Steer are trademarks of Trimble
Navigation Limited, registered in the United States and in other countries. Autopilot is a trademark of Trimble Navigation Limited.
Version 2.00, Rev A (October 2007).
GUIDANCE PATTERNS
ZTN 66020-80-ENG
AB Line Center-pivot
A+ Headland
Identical curve Adaptive curve
Set the A point, drive the pivot, and then set
the B point.
For best results, follow the outermost
wheeltrack of the pivot arm.
Note - To work from the center
of the field outwards, the initial
pivot must have a radius of at
least two swath widths and an
arc length of at least four swath
widths.
Maps a straight AB line
for guidance.
Set the A point at the
start of the line and the
B point at the end.
Set the A point to create
the line.
The heading of the AB
Line equals the manually
entered heading
(defaults to previous AB
heading).
Straight swaths automatically fill the headland
boundary.
Enter the number of headland circuits you
want before you start defining the field.
Start the headland, define the guidance line,
and then return to the start circle or press
to complete the headland.
Note - Additional headlands are
based on the first headland circuit.
Guidance is based on the
initial curve. Any deviations
are ignored.
Set the A point, drive the
curve, and then set the B
point.
Guidance is always based on the last pass.
Auto U-turn detection = On
Each new swath is automatically generated
when you turn.
Auto U-turn detection = Off
Set the B point at the end of each pass to
create the next swath.
A
B
A
A
B
A
BB
A
B
B
A
A
Single
headland
Multiple
headland
P/N 66020-80-ENG
*66020-80-ENG*
