EZCast Pro QuattroPod User manual

Touch Back Control with QuattroPod
User Manual V 1.0

Content
Introduction .............................................................................................................................. 2
Using Touch Back with Touch Screen Display.................................................................. 3
1.1. Pairing QuattroPod Transmitter with QuattroPod Receiver ................................. 3
1.2. Connecting Touch Screen Display to QuattroPod Receiver................................... 3
1.3. Connecting QuattroPod Transmitter to Laptop ..................................................... 4
1.4. Start Enjoying Touch Back....................................................................................... 4
Using Touch Back with Mouse ......................................................................................... 5
2.1. Pairing QuattroPod Transmitter with QuattroPod Receiver ................................. 5
2.2. Connecting Wireless Mouse Receiver Display to QuattroPod Receiver................ 5
2.3. Connecting QuattroPod Transmitter to Laptop ..................................................... 6
2.4. Start Enjoying Touch Back....................................................................................... 6
Introduction
With Touch Back function, presenters
can control the application installed
on their MAC or Windows laptop
remotely via touch screen display or
wireless mouse.
By leveraging Touch Back function of
QuattroPod, enterprise user can
greatly enhance productivity and
transparent communication.
* Please be advised that Touch Back function only supports Windows and
macOS platforms. If you have any issues regarding the device compatibility,
please contact Support Center.

Pairing OK
USB Port
Using Touch Back with Touch
Screen Display
For Touch Back function on touch screen display, please follow the below
instructions.
1.1.Pairing QuattroPod Transmitter with QuattroPod
Receiver
Connect QauttroPod transmitter with QuattroPod receiver via USB port. Once
plugged in, the message “Pairing…” will pop out. Within 1min, the pairing will
be done and display “Pairing OK” message on the landing page.
Please make sure QuattroPod transmitter has been switch to “PC” mode.
1.2.Connecting Touch Screen Display to QuattroPod
Receiver
Connect the QuattroPod receiver with touch screen display via HDMI and
USB Port. Make sure HDMI and USB that connected to the touch screen
display are at the same rail.
Please be advised that the touch screen should be provided with sufficient
power, otherwise may cause the touch screen to cease working.

HDMI / Mini DP
1.3.Connecting QuattroPod Transmitter to Laptop
Connect QuattroPod transmitter to laptop via HDMI/Mini DP and USB port.
We strongly suggest connecting the laptop to an external power supply, in
case the laptop being switched to power saving/ eco mode.
1.4.Start Enjoying Touch Back
Once complete all the above steps, simply click the main button on top of
QuattroPod transmitter. Then you could start controlling your application
remotely with touch screen display.

Pairing OK
USB Port
Using Touch Back with Mouse
For Touch Back function with the mouse, please follow the below instructions.
2.1.Pairing QuattroPod Transmitter with QuattroPod
Receiver
Connect QauttroPod transmitter with QuattroPod receiver via USB port. Once
plugged in, the message “Pairing…” will pop out. Within 1min, the pairing will
be done and display “Pairing OK” message on the landing page.
Please make sure QuattroPod transmitter has been switch to “PC” mode.
2.2.Connecting Wireless Mouse Receiver Display to
QuattroPod Receiver
Connect wireless mouse receiver with QuattroPod USB Port.

HDMI / Mini DP
2.3.Connecting QuattroPod Transmitter to Laptop
Connect QuattroPod transmitter to laptop via HDMI/Mini DP and USB port.
We strongly suggest connecting the laptop to an external power supply, in
case the laptop being switched to power saving/ eco mode.
2.4.Start Enjoying Touch Back
Once complete all the above steps, simply click the main button on top of
QuattroPod transmitter. A message “Hid Driver loading” would pop out.
After that, you could start controlling your application remotely with a wireless
mouse.