EZCast QuattroPod T02 Assembly instructions

QuattroPod Transmitter T02 Repair Guide
How to Update QuattroPod Transmitter’s Firmware
This instruction shows how to manually update firmware of your QuattroPod
Transmitter T02 through Windows instead of updating it Over-the-Air. Please
be advised that the Windows PC must connect to the internet. Also, we
would recommend disabling anti-virus program during the process.
To update firmware manually, user would need the tools below.
1. QuattroPod Transmitter T02
2. Windows PC
Step1. Keep pressing the “Host Control” button with you finger.
Step2. Connect your QuattroPod Transmitter to Windows PC via USB cable.

Step3. Extract “QuattroPod Transmitter T02 Repair Tool”. Then click
“EZCastUpdate.exe”.
Step4. If device successfully connected with your PC, the EZCastUpdate
application would show “Device connected” as the picture below. Click
“Download” button, the system would start downloading firmware.

Step5. Now the system is downloading firmware. Please be advised that DO
NOT turn off the power of QuattroPod Transmitter during the process.
Step6. Once download process done, please click “Upgrade” button.

Step7. Now the system is installing the latest firmware. Please be advised
that DO NOT turn off the power of QuattroPod Transmitter during the
process.
Step8. Congratulation! The QuattroPod Transmitter has been updated to the
latest firmware.