eZLO Plus User manual

Manual
Plu
Smart Home Controller

Thanks for choosing the Ezlo Plus
You’ve take the rst step toward maki g
your home smarter a d safer.
It’s easy to set up your hub
Here is what you have to do.

I stall the Vera app o your mobile device. Just
look for the i the iOS App Store or o
Google Play
If you already have the Vera app, just log i .
For starters, your Ezlo Plus hub operates o
the Vera app.
If you just dow loaded the app, tap o New to
Vera a d select Ezlo Plus from the list of
co trollers
If you already have a accou t, tap Add New
Co troller a d select the Ezlo Secure from the
My Co trollers list.
SET UP

Next, connect the A/C power adapter to your Ezlo Plus.
Once it is powered on, the LED should slowly change rom
green to blue. Wait or a steady blue light be ore
proceeding.

The Ezlo Plus supports both wired and wireless
setup. Select your preferred option and follow
the prompts.
Congratulations! Your Ezlo Plus is now connected and its
LED will remain steady blue.
If you don't already have one, it's time to create your
account. The app will walk you through it.

Make your home safer. Make your life easier
The Ezlo Plus lets you control Z-Wave™, Zigbee, and Wi-Fi
devices from a single app. When you add devices such as
lights, thermostats, sensors, cameras, and door locks to
your Vera system, you’ll be able to enjoy greater comfort
and peace of mind with just a touch
The Vera app oers some key features that help you
simplify things at home and help you keep an eye on things
when you’re away
Mode
Modes give you the power to control all your devices with a
single tap. There are pre-set modes for Home, Away, Night,
and Vacation
Scene
The true power of home automation is when your home
can do things for you. With Scenes you can schedule your
lights to turn o when you leave for work in the morning,
or to fade up as day turns to night
Notication
Your Vera system can send push notications and emails to
let you—or other users—know about what’s going on at
home.
Ezlo VO
This powerful tool lets you use your voice or a scene to
control over 27,000 Wi-Fi devices associated with Amazon
Alexa or Google Assistant.
Control your home from anywhere

Need help seing up
You can each ou Custome Ca e team seven days a week
at 866.966.2272 between 6am and 10pm US CST/EST* o
at
You can also pu chase ou Ve a Easy Sta t se vice and get
one hou of pe sonalized setup assistance th ough a phone
call with one of ou most expe ienced agents
Visit to lea n mo e
To nd the complete Use Guide, as well as info mation
about the p oducts FCC/IC egist ation, visit getve a.com/
suppo t and click on “Downloads, Fi mwa e & Manuals.
suppo t@getve a.co
getve a.com

Incl sion and Excl sio
Your Ezlo Plus Controller can work with all Z-Wave devices,
such as sensors, alarms, door locks, thermostats, etc. Over
a thousand Z-Wave devices are available from many
brands. (Z-Wave is a wireless communications system;
check the package or specs to see if a device uses
Z-Wave.
The Ezlo Plus can be operated in any Z-Wave network with
other Z-Wave certied devices from other manufacturers.
All mains operated nodes within the network will act as
repeaters regardless of vendor to increase reliability of the
networ
Before your Ezlo Plus can control a device, it must be
included into the Vera system.
Vera are available for select
devices that pass stringent Vera Labs testing for
compatibility and quality. The Custom Device Wizards
make Inclusion/Exclusion easiest, with specic details for
each device. A list of these devices is available and
updated at hps://ezlo.com/device-compatibility
For all other Z-Wave devices, a is
used for Inclusion/ Exclusion. A Generic Device Wizard is
available for each device category (thermostats, sensors,
alarms, etc.)
Custom Device Wizards
Generic Device Wizard

Adding Z-Wave Devices to your Ezlo lu
Before Ezlo Plus can control a device, it must be added into
the system
Start using your Ezlo Plus by adding devices like lights,
thermostats, sensors, and more. Just tap the menu icon at
the top left of the dashboard, select Devices, and then tap
the + sign to launch the Device Pairing Wizard.
From your Dashboard, go to > tap on the + in
the top right corner and select or search the name or
type of device that you wish to pair with your Ezlo Plus.
Devices
1.

To add a generic Z-Wave device, select the
from the device
categories.
Generic Z-Wave device
To add the device
with your Ezlo
Plus, if the device
requires assembly
read the manual,
follow the
assembly
instructions there,
power the device,
and click Next.
2.
3.