Ezviz UD01490B User manual

ACTION CAMERA
Quick Start Guide
UD01490B

COPYRIGHT ©2016 Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries. ALL RIGHTS RESERVED.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the latest version in the ™ website (http://www.
ezvizlife.com).
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision
Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter
referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means,
without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
Trademarks Acknowledgement
™, ™, and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE
AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA
OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL
HIKVISION’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE PURCHASE PRICE THE PRODUCT.
HIKVISION does not undertake any liability for personal injury or property damage, as the result of product interruption or
service termination cause by: a) improper installation or usage other than as requested; b) the protection of national or
public interests; c) Force Majeure; d) yourself or the third party, including not limitation, using any third party’s products,
software, applications, and among others.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES
RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING
THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. YOU FUTHER AGREE THAT THIS
PRODUCT IS ONLY FOR CIVIL USE, AND HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES, SUCH AS THIRD PARTY RIGHTS INFRINGEMENT, MEDICAL TREATMENT, SAFETY EQUIPMENT OR

OTHER SITUATIONS WHERE THE PRODUCT FAILURE COULD LEAD TO DEATH OR PERSONAL INJURY, OR WEAPON OF MASS
DESTRUCTION, CHEMINCAL AND BIOLOGICAL WEAPON, NUCLEAR EXPLOSION, AND ANY UNSAFE NUCLEAR ENERGY USES OR
ANTI-HUMANITY USAGES. YOU SHOULD UNDERTAKE ALL RESPONSIBILITIES FOR LOSSES OR DAMAGES RESULTING FROM
THE ABOVE USAGES WHATSOEVER.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Please take attention that changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the Radio Equipment
Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un
type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques
de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
Safety Instruction
CAUTION: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY. RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection
point. For more information see: www.recyclethis.info.

1
1
2
3
3
4
1
5
6
8
7
1
9
10
11
1
13
12
14
5
Basics
1

1Recording Status LED Indicator Steady on: Standby
Flicker: Recording
2Wi-Fi Status LED Indicator Unlit: Wi-Fi is off
Flicker: Wi-Fi is on
3MIC Microphone
4Shutter Start/Stop recording
5Speaker Audible sound and video playback
6Power LED Indicator Steady Red: Charging
Steady Blue: Charged
7microSD Card Slot Insert a microSD card for storage. The microSD card is not
included in the box. Please purchase separately (see page 5
for the recommended microSD card models).
8USB Interface USB data transfer and charging.
9micro-HDMI Interface HDMI output
10 Power Button Hold down for 0.5 second to power on, 3 seconds to power
off.
11 LCD Screen LCD touch screen
12 Setup Button Press to enter video settings menu
Hold down to turn on Wi-Fi
13 Battery cover Hold down the arrow and pull out the cover. You can replace
the battery if it runs out.
14 Standard Bracket
Interface (1/4 inch)
Interface for various brackets.
2

Display Introduction
00:00:00|02:00:00
4K/3 0/ Wide
1
2
4
5
3
1Current Recording Mode
Video
Photo
Burst
Time Lapse
2Video: Time Already Recorded / Time Left for Recording
Photo & Busrt & Time Lapse: Captured Picture Number / Left Picture Number
3Video: Resolution/Frame Rate/ Field of View
Photo: Resolution
Burst: Resolution/Capture Rate
Time Lapse: Resolution/Capture Interval
4Battery Status
5Live view or playback image
/
3

Operation
Step 1
Take out camera
The camera is placed inside a waterproof housing by default. Before using the camera for the first
time, take out the camera from waterproof housing to insert the microSD card and charge.
4

Step 2
Insert the microSD card.
The camera supports video and picture storage in the local memory card.
Insert the microSD card into the microSD card slot. (Use the recommended card model and the card
capacity should be no less than 4GB.)
MicroSD Card Level Requirement: Class 10 and above.
MicroSD Card Recommendation:
SANDISK EXTREME®32GB microSDHCTM
SANDISK EXTREME®64GB microSDHCTM
LEXAR®32GB microSDHCTM
LEXAR®64GB microSDHCTM
5

Step 3
Charge the camera.
Install the Battery
1
Hold down the arrow and pull out the cover according to the arrow. Insert the battery and
replace the battery cover.
Connect to Power
2
It’s advised to fully charge the camera in the power-off status before you use the camera for the
first time.
Power Cable
Power Socket
6

Power-on and Power-off
Power on
Hold down the power button and release until the buzzer alerting. The buzzer alerts quickly and
the Camera Status LED Indicator flickers in purple. When the indicator turns steady blue, the camera
is power-on and standby.
Power off
Hold down the power button and release until the buzzer alerting and the Camera Status LED
Indicator turning off, the camera is power-off.
You are not allowed to power off the camera when the camera is recording or capturing photos.
7

Record
The camera supports four recording modes.
Video Record video
Photo Capture a photo
Burst Capture multiple photos in a short time interval.
Time Lapse Photo/
Time Lapse Video
Continuously capture photos in a predefined interval;
Continuously capture photos in a predefined interval and make the photos
into a video.
Press to record.
00:00:00|02:00:00
4K/ 30 /Wide
Press to switch to the next recording mode or playback.
8

Set Parameters
Tap on the touch screen to show the current recording mode.
Slide upward or press to set the advanced recording parameters.
Slide to left to enter the main menu. You can change recording mode or tap icon to enter
the camera setup menu.
00:00:00|02:00:00
4K/3 0/ Wide
9

Wireless Control
You can turn on the camera’s Wi-Fi to allow the remote control or EZVIZ SPORTS app to
connect with the camera.
Hold down to turn on Wi-Fi.
You can set the wireless control mode in the setup menu.
• If you select App as the wireless control mode, you can search the “EZVIZ SPORTS” on App
Store or Google PlayTM to download and install the app.
Turn on the Wi-Fi function of your mobile phone, find the Wi-Fi signal of camera and connect
with it.
Wi-Fi Name: EZVIZ_XXXX
Wi-Fi Password: 1234567890
• If you select Remote as the wireless control mode, refer to the Quick Start Guide of Remote
Control for details.
The default Wi-Fi name and password are for first-time log-in purposes only. You
must change this default password to better protect against security risks, such as
the unauthorized access by others to the product that may prevent the product from
functioning properly and/or lead to other undesirable consequences.
The Wi-Fi name and password will be reset to default after the camera is reset.
10

Connect with Display
You can connect the S1 and monitor with a HDMI cable to play back videos and photos, record, and get
live video.
Connect the camera to the display with a micro-HDMI cable, and power on the camera to show the live
view or playback on the display.
The HDMI cable is not included in the box. Please purchase separately.
Display
HDMI Cable
micro-HDMI Interface
The LCD screen will be invalid when the camera connects with a display. You can switch the recording
mode or enter menu with buttons.
Next Item/Next Mode Confirm Return
11

Appendix:
The frame adapter is included in the camera package. With the frame adapter, the camera can be used
with various kinds of accessories.
Applicatio 1 Installing on the Aerial Vehicle
The figure of installed camera on the aerial vehicle is shown below.
1. Place the fixing frame on the aerial vehicle.
Frame Adapter Usage
12

2. Align the camera lens with the hole on the fixing frame.
3. Properly place the fixing bracket according to the screw holes on the frame and then secure
the two screws.
13

Applicatio 2 Installing on the Stabilizer
The figure of installed camera on the stabilizer is shown below.
1. Place the fixing frame on the stabilizer.
14

2. Backward place the camera on the fixing frame.
3. Properly place the fixing bracket according to the screw holes on the frame and then secure
the two screws.
15