Ezviz X3 User manual

JP
KO
THAI
VT
ZT

COPYRIGHT ©2015 Hangzhou Hikvision Digital Technology Co., Ltd. or its
subsidiaries. ALL RIGHTS RESERVED.
About this Manual
The Manual includes instructions for using and managing the product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version in the ™ website (http://www.ezvizlife.com).
Any and all information, including, among others, wordings, pictures, graphs are
the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its
subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter
referred to be “the Manual”) cannot be reproduced, changed, translated, or
distributed, partially or wholly, by any means, without the prior written permission
of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
Trademarks Acknowledgement
™, ™, and other Hikvision’s trademarks and logos are the properties
of Hikvision in various jurisdictions. Other trademarks and logos mentioned below
are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED
“AS IS”, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO
YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS
PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION,
IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL HIKVISION’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE
PURCHASE PRICE THE PRODUCT.

HIKVISION does not undertake any liability for personal injury or property
damage, as the result of product interruption or service termination cause by: a)
improper installation or usage other than as requested; b) the protection of
national or public interests; c) Force Majeure; d) yourself or the third party,
including not limitation, using any third party’s products, software, applications,
and among others.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT
TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE
OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
The purpose of the Products is to provide an adequate warning in the event of
illegal encroachment in certain area; however, the proper installation of the
Products will not eliminate, but only reduce, that accidents will not occur or that
there will be no personal injury or property loss as a result. You are highly
recommended to raise your vigilance and strengthen the safety awareness in the
daily life.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. YOU FUTHER
AGREE THAT THIS PRODUCT IS ONLY FOR CIVIL USE, AND HIKVISION SHALL
NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES, SUCH AS THIRD PARTY RIGHTS INFRINGEMENT,
MEDICAL TREATMENT, SAFETY EQUIPMENT OR OTHER SITUATIONS WHERE
THE PRODUCT FAILURE COULD LEAD TO DEATH OR PERSONAL INJURY, OR
WEAPON OF MASS DESTRUCTION, CHEMINCAL AND BIOLOGICAL WEAPON,
NUCLEAR EXPLOSION, AND ANY UNSAFE NUCLEAR ENERGY USES OR
ANTI-HUMANITY USAGES. YOU SHOULD UNDERTAKE ALL RESPONSIBILITIES
FOR LOSSES OR DAMAGES RESULTING FROM THE ABOVE USAGES
WHATSOEVER.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE
APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits
for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable harmonized
European standards listed under the EMC Directive 2004/108/EC, the
RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot
be disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated
collection points. For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated collection point.
For more information see: www.recyclethis.info.

The HDD rubber case will not be included if the product is
equipped with a HDD by default.
The figures in this manual are for reference only and may
differ from the actual product.
X3 (x1) Power Adapter (x1) Quick Start Guide (x1)
Quick Start Guide
1
Packing List
Power Cable (x1)
HDD Rubber Case 1 (Optional) (x2)
(For 7mm thick HDD)
HDD Rubber Case 2 (Optional) (x2)
(For 9mm thick HDD)
TOP
TOP
Network Cable (x1)
ENGLISH

Blue: Normal
Yellow: Exception
Appearance
Front Panel
LED Indicator
2

The network cable is not included in the pacakage. It should be
prepared separately.
Connect to a Router
Network Interface
Power Input
5V
USB Interface
RESET Hole
Interface Part 1
Interface Part 2
To reset the settings: Press and hold the RESET button with a
needle for as least 3 seconds when the device is power-on, and
release until the LED indicator flickers quickly.
3

2.5-inch HDD Installation (Optional)
1
1
234
Loosening the Screws
Loosen the 4 screws on the base of the X3 with a screwdriver, as
shown in the figure below:
The No.1 screw is behind the label.
2Opening the Cover
Open the cover at the groove according to the direction of arrow,
as shown in the figure below:
4

4Installing the HDD
Connect the HDD cable to the HDD and place the HDD in the
designated position, as shown in the figure below.
If the HDD is 9mm thick, the TOP mark of the rubber case
should be facing upward when installing .
3Installing the HDD Rubber Case
Pick an appropriate rubber case according to the HDD thick,
and cover the rubber case on the two sides of the HDD, as
shown in the figure below.
Completing Installation
5Replace the cover and fasten the 4 screws in the step 1 and
complete the installation.
TOP
TOP
TOP
TOP
TOP
TOP
TOP
5

2Connect the X3 to the power adapter with a power cable, and
connect to the power socket. The LED indicator turns solid blue
when the X3 starts completely.
The X3 does not support the Wi-Fi network connection.
The indicator turns solid yellow in the following cases:
- No installed HDD
- HDD error
- Device exceptions
1
Starting up the X3
Connecting to the Network
Power-on
Operations
Connect X3 to the router with a network cable.
POWER WAN LAN2 LAN4LAN1 LAN3 WPS/
RESET
Network Cable
Step 1
6

The X3 supports up to 8 cameras recording.
Adding X3 to EZVIZ
2- Log into the EZVIZ app.
- Click the “+” on the upper-right hand corner to add a device.
- Scan the QR Code on the bottom of X3.
1- Download and install the EZVIZ app by searching the “EZVIZ” in
App Store or Google PlayTM.
- Launch the app and register for an EZVIZ user account.
3The procedure of adding a network camera is the same as the
adding X3. Refer to the step 2 to add a network camera to your
EZVIZ account.
Adding Network Camera to EZVIZ
Installing the EZVIZ App
Adding Devices to EZVIZ
Adding by Scanning QR Code
Network Video Recorder
Model: XXXXXX
IP: XXX
SN: XXXXXXX
MM/YYYY
Verification Code: XXXXXX
Step 2
Step 3
After adding the X3 and cameras to your EZVIZ account, go to the
storage status of camera and enable the X3 recording. X3 will start
the 7*24-hours continuous recording of cameras.
Completing Configuration
7

Certain functions of this product (including but not limited to live
view, recording, and remote playback) depend upon the Internet
connection. To learn more about these functions, visit the EZVIZ
website ezvizlife.com and register for a new account.
Function Introduction
Unique HDD Storage Technology
The unique disk pre-allocation technology is able to
extend the HDD lifetime, effectively decrease the disk
fragments, increase the HDD utilization, and ensure the
video security.
7*24-hour continuous cycle recording and playback.
EZVIZ Cloud Service
Cloud recording videos and pictures.
8

9
同梱品リスト
Quick Start Guide
TOP
TOP
X3 (x1) 電源アダプタ (x1)
電源ケーブル (x1)
クイック スタート
ガイド (x1)
ネットワークケーブル (x1)
HDDラバー ケース 1
(オプション) (x2)
(7mm厚HDD用)
HDDラバー ケース 2
(オプション) (x2)
(9mm厚HDD用)
●本製品に最初からHDDが装着されている場合、HDDラバー ケー
スは付属しません。
●本マニュアルの図表は参考であり、実際の製品と異なる場合があ
ります。
日本語
日本語

10
外観
フロントパネル
LEDインジケータ
青：ノーマル
黄：異常

11
インターフェイス パート 1
USBインターフェイス
電源入力
5V
ネットワークインターフェイス
ルータに接続
本製品にはネットワークケーブルは同梱されていません。別途購入
してください。
インターフェイス パート 2
リセット穴
設定のリセット：本機に電源が入っている状態で針先でリセットボタ
ンを3秒間長押し、LEDインジケータが速く点滅したら放します。

12
2.5インチHDDの設置(オプション)
1ネジを緩める
下図に示すように、ドライバーでX3のベースにある4本のネジを緩
めます。
1
234
No.1ネジはラベルの背後にあります。
2カバーを開く
下図に示すように、矢印の方向に沿って、溝にあるカバーを開き
ます。

13
3HDDラバー ケースの取付
HDDの厚みに合ったHDDラバー ケースを選択し、下図に示すよう
に、HDDの両側をラバー ケースでカバーします。
TOP
TOP
TOP
HDDの厚みが9mmの場合、設置の際にラバー ケースの上面 (TOP)
とマークされた面が上を向くようにします。
4HDDの設置
HDDにHDDケーブルを接続し、下図に示すように、所定の位置に
HDDを配置します。
TOP
TOP
TOP
5設置完了
カバーを取り付け、手順1のように4本のネジを締め付けると、設
置が完了します。

14
操作説明
手順1 •••••••••••••••••••••••••••••••••••••••••••••••
X3の起動
1ネットワークとの接続
ネットワークケーブルでX3をルータに接続します。
65=+8 ='4 2'4 2'42'4 2'4 =69
8+9+:
ネットワークケーブル
X3はWi-Fiネットワーク接続をサポートしません。
2電源オン
電源ケーブルでX3と電源アダプタを接続し、コンセントに接続
します。X3が完全に起動するとLEDインジケータが青色で点灯し
ます。
以下の場合にはインジケータが黄色で点灯します。
- HDDが設置されていない
- HDDのエラー
- デバイスの異常

15
手順2 •••••••••••••••••••••••••••••••••••••••••••••••
EZVIZにデバイスを追加する
1EZVIZインターナショナル アプリのインストール
- App StoreまたはGoogle PlayTMで「EZVIZ」を検索して、EZVIZイン
ターナショナル アプリをダウンロードしてインストールします。
- アプリを起動して、EZVIZユーザ アカウントユーザ アカウントを
登録します。
2EZVIZにX3を追加する
- EZVIZインターナショナル アプリにログインします。
- 右上の「+」をクリックして、デバイスを追加します。
- X3の底面にあるQRコードをスキャンします。
Network Video Recorder
Model: XXXXXX
IP: XXX
SN: XXXXXXX
MM/YYYY
Verification Code: XXXXXX
QRコードをスキャ
ンして追加する
3EZVIZにネットワークカメラを追加する
ネットワークカメラの追加手順はX3の追加手順と同じです。手順
2を参照して、EZVIZアカウントにネットワークカメラを追加して
ください。
手順3 •••••••••••••••••••••••••••••••••••••••••••••••
設定の完了
EZVIZアカウントにX3とカメラを追加したら、カメラのストレージステ
ータスに進み、X3の録画を有効にしてください。X3は、週7日、1日24
時間のカメラの連続録画を開始します。
X3は、8台までのカメラの録画をサポートします。

16
機能の説明
週7日、1日24時間の連続サイクル録画と再生
EZVIZカメラを自動追加する
同じLAN上にあり、同じアカウントにリンクされている
EZVIZカメラが自動的に追加されます。
独自のHDDストレージテクノロジー
独自の事前割当テクノロジーにより、HDDの寿命を延ば
し、効果的にディスクの断片を減少させ、HDDの利用率を
上げ、ビデオのセキュリティを向上します。
EZVIZクラウドサービス
ビデオと画像のクラウド録画
本製品の特定の機能 (ライブビュー、録画、遠隔再生を含むがそ
れだけに限定されない) は、インターネット接続によって異な
ります。こうした機能の詳細を知るには、EZVIZウェブサイト
(www.ezvizlife.com) にアクセスし、新規アカウントを登録してく
ださい。