Ezviz A3 User manual

1
Overview
1� Package Contents
Home Gateway Power Adapter
USB Cable Regulatory Information Quick Start Guide
The power adapter's appearance is subject to the one you have bought.
2� Basics
LED Indicator Ring
Function Key
Speaker
Power Port
RESET Hole
Network Port
Antiskid Mat
Name Description
Function Key
• Press and hold the button for over 4s, the gateway will enter Wi-
Ficongurationmode.
• Press the button once, the gateway will enter device adding
mode; press again, the gateway will exit device adding mode.
• If the gateway sends alarms, press the button to clear alarms.

2
LED Indicator
Ring
White
• Solid: Working properly and has been connected to the EZVIZ
Cloud.
• Slow-ashing:Entereddeviceaddingmode.
• Fast-ashing:Conguringnetwork.
Orange
• Solid: Starting up or upgrading.
• Slow-ashing:Oine.
• Fast-ashing:Breakdownsoccuroralarmsproduced.
RESET Hole
While the gateway is running, poke the hole with SIM card eject
needles or clips for over 4 seconds, the gateway will restart, and
theWi-Ficonguration,localrecords,currentalarmstatusandall
sub devices will be cleared. After resetting the gateway, there will
be a voice prompt.
Get the EZVIZ App
1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store
or Google PlayTM.
3. Launch the app and register an EZVIZ user account.
EZVIZ App
If you have already used the app, please make sure that it is the latest version. To
ndoutifanupdateisavailable,gototheappstoreandsearchfor"EZVIZ".
Select Appropriate Location
• The gateway needs to be plugged in.
• To ensure that the connection between the gateway and sub devices is stable,
please place the gateway at the center of the sub devices, and the distance
betweenthegatewayandtheroutershouldbe≤6meters.
• There should be no metal obstacles and walls between the gateway and sub
devices, and the gateway and the router.
• Do not place any gateway or detector on the top of the router.
Router
Gateway
≤6m

3
Connect to Power Source
Plugthegatewayin.Whenstartupthegatewayforthersttime,theLEDindicator
ringturnsfromsolidorangetofast-ashingwhite,whichmeansthatthegateway
hasenterednetworkconguringmode.
Power Adapter
Outlet
Connect to Network
• Wired network is recommended. You need to connect the gateway to the LAN
port of the router with network cable (purchase separately) as displayed in the
gurebelow.
Router
• You can also use wireless network. Scan the QR code at the bottom of the
gateway with the EZVIZ app, and then connect the gateway to Wi-Fi by following
the on-screen instructions.
If Wi-Fi connection failed, or you want to connect the gateway to another Wi-Fi, you need to
makethegatewayoinerst.Pressandholdthefunctionkeyforover4secondsuntilyou
hear the voice prompt, and then connect the gateway to Wi-Fi by following the on-screen
instructions.
Add Device
1� Add Gateway
1. Log in to your account through EZVIZ app, tap the device adding icon and
then the QR code scanning interface will be displayed.

4
2. Scan the QR code at the bottom of the gateway or on the cover of the user
manual.
Scan QR Code
3. Add the gateway by following the wizard on the app.
2� Add Sub Devices
1. Press the function key of the gateway once to make the gateway enter device
addingmode,andtheLEDindicatorringisinslow-ashingwhite.
2. Make sub devices enter adding mode as instructed by user manuals of sub
devices.
3. There will be voice prompt reminding you that sub devices have been added
to the gateway automatically.

5
Operations on the EZVIZ App
The app interface may be different due to version update, and the interface of the app you
installed on your phone shall prevail.
1� Homepage
When you launch the EZVIZ app, you can manage the gateway and the sub devices
as needed on the homepage.
Sub devices Click sub devices, you can see and manage it as needed.
Add smart sub-devices Click this icon, you can add your sub device to the
gateway.
Dismiss Clear alarms of all sub devices.
2� Settings
Parameter Description
Device Name Customize the name of your device.
Sub-devices upgrade
automatically
When enabled, the sub-devices will upgrade
automatically after downloading upgrading packages.
Alarm Settings Youcansetthenoticationparametersasneeded.
Light Setting When disabled, the indicator ring will be off.
Network Settings You can see the Wi-Fi name and the connection status.
Device Information You can see the device information here.
Delete Device Tap to delete the gateway from EZVIZ cloud.