Faber FBG Blendy 125 GR User manual

FBG Blendy 125 GR
FBG Blendy 125 ORG
AC220-240V~ 50/60Hz 300-327W
Read this instruction manual carefully before using this product.

IMPORTANT SAFEGUARDS
When using the Blender, basic safety precautions should always be followed:
•Always operate your Blender from a power source of the same voltage and frequency rating as
indicated on the rating label.
•Do not place the unit on uneven surfaces. Place upon a flat area surface and far from the edge of
counter top.
•Do not use Blender in damp or wet area. Keep dry the exterior and the base of the Blender.
•Do not operate the Blender if any part of it has been damaged. Return the appliance to the nearest
authorized dealer or service facility for repair.
•Do not operate or place any part of your Blender on or near any hot surface such as a gas or electric
burner, hotplate or heated oven.
•Do not use or replace accessories other than the ones originally provided.
•Always ensure that the Blender container is firmly attached to the base before operating.
•Always put in Blender container cover before turning ON the unit.
•Foods to be processed in the Blender should not be larger than 1 inch.
•Always ensure that the cover is tightly closed while the Blender is in operation.
•While operating, hold to support Blender container cover to avoid any untoward incidents.
•Always choose the lowest setting first when using the Blender. Higher speed level if you notice that
Blender is taking much time processing food.
•Use a rubber spatula to push or mix foods to be processed inside the Blender. Make sure that the
unit is turned OFF when mixing foods inside the container.
•Do not overload Blender by putting too much food on the container exceeding the MAX line
indicated on the Blender container.
•Never leave the Blender unattended when in use.
•Wait until the Blender has completely stopped processing before removing pitcher / dry mill from the
base.
•Switch OFF and unplug the Blender outlet before emptying, when not in use or before cleaning.
•Hold plug when unplugging from socket. Do not unplug by pulling the supply cord.
•To reduce the risk of electric shock, do not immerse or expose the Blender to rain, moisture or any
liquid.
•Keep out of reach from children or from persons with mental or physical disabilities.
•This Blender is intended for normal domestic/household use only. This unit is not suitable for
commercial use.
PARTS DESCRIPTION
1. main body
2. knob
3. measuring cup
4. Lid
5. blender jar (unbreakable PC)
6. Silicone sealing
7. blender units
8. grinding cup
9. grinder units

HOW TO USE
Please referring to the pictures
Ingredients sizes not larger than 2cmX2cmX2cm
Operation Time: Please do not operate with blending function more than 1 min for each time
Caution: If the blender get stuck, please stop it immediately
Grinding time: Do not run for more than 30 seconds for each time
Caution：
a. If the grinding blade is running without touch food, please unplug the power, disassemble
the grinding cup, shake the food and start grind function again.
b. After grinding is finished, do not disassemble the grinding cup until the motor stops.
Use food for test: carrot size not larger than 2cmX2cmX2cm, with water according to the rate
(carrot 2: 3 water) together, also the total capacity is not more than 1.5L.
Pour about 400--700ml water into the jar, make sure the jar with lid on the body correctly and
use function ‘Pulse’ for a few seconds after using.
Put the Silicone sealing onto
the blender units according to
the diagram (Or remove for
the cleaning. Ex-factory
goods have been fitted to the
blender units.)
Fit the blender units to the
blen
der jar according to the
diagram, putting food (the size
of the mixing ingredients should
be less than 2cm*2cm*2cm).
Assembled the lid on the jar
Insert the measuring cup
properly in the lid
Assembled the blender jar
with the food onto the main
body, then plug in, turning
round the knob.
After finished the blending,
adjust the knob switch to ‘0’
position, pull the plug. Detach
the blender jar according to
diagram.
Put the dry grinding food into the
grinding cup, and then assemble
to the grinder units according to
the diagram.

Assembled the grinding cup
with the food onto the main
body, then plug in, turning
round the knob.
After finished the grinding,
adjust the knob switch to ‘0’
position, pull the plug. Detach
t
he grinder cup according to
diagram.
CLEAN AND CARE
•After every use, wash movable parts of the Blender and Dry Mill with warm, soapy water.
•The Blender container may be washed by putting water and a few drops of liquid detergent in it.
Place Blender Pitcher in the motor base then allows operating for about 10 seconds. Discard liquid
then rinse Blender container thoroughly.
•Never immerse Blender motor in water. Clean the motor housing by wiping with a soft and damp
cloth.
•Never use abrasive cleaning agents or any metallic and sharp objects (e.g. scrubbing brush or knife)
for cleaning.
•Wipe dry all parts of the Blender using a soft and dry cloth.
•Put back parts and accessories of the Blender to their proper places before operating again.
•Store Blender in a cool, dry place after cleaning.
SERVICE
•Do not operate your Blender if the unit malfunctions or appears damaged in any manner. Bring the
complete product to the place of purchase or to any authorized dealers for inspection, repair or
replacement.
•Do not disassemble your Blender by yourself. No user serviceable parts inside. Refer all needed
repair to an authorized service facility ONLY.
Technical specifications
Mains voltage: AC220-240V 50/60Hz
Power: 300-327W
Short time operation: Max 1 min
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.