Faber AXIA ISOLA 630000815 User instructions

island canopy rangehood
sleek styling
600 cfm PRO motor
Silent Kit noise reduction
4 halogen lights
3 speed control
integrated control panel
stainless steel baffle filters
modified pro depth
convertible to ductless*
adjustable mounting system
Easy Cube motor access
sone range: 3.5 - 6.5
6” round duct
Size/Color/Model #
36 x 29 Stainless
48 x 29 Stainless
Axia Isola
a sophisticated silhouette
°
°
°
°
°
°
°
°
°
°
°
°
°
°
DESIGNER
630000815
630001068
accessories
Includes: • Lower Chimney with hole for
ducting • Ductless Diverter Assembly •Vent
Grate • Charcoal Filter
Ductless Conversion Kit
Stainless 620000042
Replacement Charcoal Filter 620000041
* it is highly recommended that professional
style cooking always be vented to the
outside.
Mounting Support
Template
The hole in the ceiling for the ductwork should not be centered over the exact center of the cooking surface as the
duct work that runs up inside the chimney and through the ceiling is not in the exact center of the chimney.
The slim stainless steel and
glass profile of the Axia Isolaplus
is perfect for the sleek and
modern kitchen. The quiet,
600 cfm PRO motor is located
in the chimney, allowing for an
ultra thin canopy and room for
a view. Part of the designer
collection, the Axia Isolaplus
looks and performs equally well
over professional or European
style cooking surfaces.
p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com
pro-style baffle filters with
European flair and a built-in
grease control system; bright
halogen lights encircled
by a stylish stainless bezel

upper
chimney
cover
ductless
lower
chimney
cover
canopy
cabinet base
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
1" min
7" max
31"
36”
x
min & max ceiling height examples
x = 30"
min
8' 4 5/8"
max
8' 10 5/8"
x = 28"
min
8' 2 5/8"
max
8' 8 5/8"
x = 26"
min
8' 5/8"
max
8' 6 5/8"
x = 24"
min
7' 10 5/8"
max
8' 4 5/8"
20"
25/8”
33/4”
upper
chimney
cover
lower
chimney
cover
canopy
cabinet base
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
3 3/8” min
14 3/8” max
23 5/8”
25/8”
36”
x
min & max ceiling height examples
x = 30"
min
7' 11 5/8"
max
8'
10 5/8"
x = 28"
min
7' 9 5/8"
max
8' 8 5/8"
x = 26"
min
7' 7 5/8"
max
8' 6 5/8"
x = 24"
min
7' 5 5/8"
max
8' 4 5/8"
Rev.04/05
WARNING! Product specifications are subject to change without notification. Consult the installation instructions
before you begin installing this rangehood.
Pre-Planning Your Ductwork Ductless Installations*
For installations where ductwork is
impossible or highly impractical, a
ductless conversion kit is available. A
charcoal filter, which attaches under the
blower assembly, absorbs smoke and
odors. A ductless diverter assembly
directs the air out to a lower chimney
with a vent grate cut into the back.
Make your ductrun as straight and short as possible. The ductrun
should not exceed 35 equivalent feet if ducted with the required
minimum of 6” round duct. Count 45º angles as 3 feet, 90º elbows
as 5 feet, and 90º flat elbows as 12 feet.
For best results, use no more than three 90° elbows. Make sure
that there is a minimum of 24” of straight duct between elbows
if more than one is used. Do not install two elbows together. If
you must elbow right away, do it as far away from the hoodʼs
exhaust opening as possible.
Ducted
* it is highly recommended that professional style cooking always be vented to the outside.
Ductless
Dimensional Diagrams
Pre-Planning Your Installation - Important: Consult the installation instructions before you begin installing this rangehood.
Note: The Ductless Vent
Grate exhausts toward the
rear of the chimney.
Ducted Ductless
The ducted Axia Isola Plus chimney can be adjusted for ceilings between 7ʼ 5 5/ 8” and 8ʼ 10 5/ 8” depending on the distance between the bottom of the hood and the cooktop
(distance x in above DUCTED diagram). The ductless Axia Isola Plus chimney can be adjusted for ceilings between 7ʼ 10 5/ 8” and 8ʼ 10 5/ 8” depending on the distance
between the bottom of the hood and the cooktop (distance x in above DUCTLESS diagram).