Fairchild 1V5KE440(C)A User manual

1V5KE6V8(C)A - 1V5KE440(C)A
1V5KE6V8(C)A - V5KE440(C)A, Rev. D
Transient Voltage Suppressors
1V5KE6V8(C)A - 1V5KE440(C)A
1500 Watt Transient Voltage Suppressors
Absolute Maximum Ratings* TA= 25°C unless otherwise noted
2002Fairchild Semiconductor Corporation
Symbol Parameter Value Units
PPPM Peak Pulse Power Dissipation at TP=1ms 1500 W
IPPM Peak Pulse Current see table A
PDPower Dissipation
.375 " lead length @ TA= 75°C 5.0 W
IFSM Non-repetitive Peak Forward Surge Current
superimposed on rated load (JEDEC method) (Note 1) 200 A
Tstg Storage Temperature Range -65 to +175 °C
TJOperating Junction Temperature + 175 °C
Features
•Glass passivated junction.
•1500W Peak Pulse Power capability
at 1.0 ms.
•Excellent clamping capability.
•Low incremental surge resistance.
•Fast response time; typically less
than 1.0 ps from 0 volts to BV for
unidirectional and 5.0 ns for
bidirectional.
•Typical IRless than 1.0 µA above 10V.
•UL certified, UL #E210467.
DEVICESFOR BIPOLAR APPLICATIONS
- Bidirectional types use CA suffix.
- Electrical Characteristics apply in both directions.
DO-201AE
COLOR BAND DENOTES CATHODE
ON UNIDIRECTIONAL DEVICES ONLY. NO
COLOR BAND ON BIDIRECTIONAL DEVICES.
*Theseratingsarelimiting values above whichtheserviceability of any semiconductordevicemay be impaired.
Note 1:Measuredon8.3ms single half-sinewave; Duty cycle = 4 pulses perminute maximum.

1V5KE6V8(C)A - 1V5KE440(C)A
1V5KE6V8(C)A - 1V5KE440(C)A, Rev. D
Transient Voltage Suppressors
(continued)
Electrical Characteristics TA=25°C unless otherwisenoted
Uni-directional
Bi-directional (C)
Device
Reverse
Stand-off Voltage
VRWM (V)
Breakdown Voltage
VBR (V) Test
Current
IT(mA)
Clamping
Voltage @IPPM
VC(V)
Peak Pulse Current
IPPM (A) Reverse
Leakage VRWM
IR(uA)*
Min Max
1V5KE6V8(C)A5.80 6.45 7.14 10 10.5 143 1000
1V5KE7V5(C)A6.40 7.13 7.88 10 11.3 133 500
1V5KE8V2(C)A7.02 7.79 8.61 10 12.1 124 200
1V5KE9V1(C)A7.78 8.65 9.55 1 13.4 112 50
1V5KE10(C)A8.55 9.50 10.5 1 14.5 103 10
1V5KE11(C)A9.40 10.5 11.6 1 15.6 96.2 5
1V5KE12(C)A10.2 11.4 12.6 1 16.7 90.0 5
1V5KE13(C)A11.1 12.4 13.7 1 18.2 82.0 5
1V5KE15(C)A12.8 14.3 15.8 1 21.2 71.0 5
1V5KE16(C)A13.6 15.2 16.8 1 22.5 67.0 5
1V5KE18(C)A15.3 17.1 18.9 1 26.2 59.5 5
1V5KE20(C)A17.1 19.0 21.0 1 27.7 54.2 5
1V5KE22(C)A18.8 20.9 23.1 1 30.6 49.0 5
1V5KE24(C)A20.5 22.8 25.2 1 33.2 45.2 5
1V5KE27(C)A23.1 25.7 28.4 1 37.5 40.0 5
1V5KE30(C)A25.6 28.5 31.5 1 41.4 36.2 5
1V5KE33(C)A28.2 31.4 34.7 1 45.7 33.0 5
1V5KE36(C)A30.8 34.2 37.8 1 49.9 30.1 5
1V5KE39(C)A33.3 37.1 41.0 1 53.9 28.0 5
1V5KE43(C)A36.8 40.9 45.2 1 59.3 25.3 5
1V5KE47(C)A40.2 44.7 49.4 1 64.8 23.2 5
1V5KE51(C)A43.6 48.5 53.6 1 70.1 21.4 5
1V5KE56(C)A47.8 53.2 58.8 1 77.0 19.5 5
1VKE62(C)A53.0 58.9 65.1 1 85.0 17.7 5
1V5KE68(C)A58.1 64.6 71.4 1 92.0 16.3 5
1V5KE75(C)A64.1 71.3 78.8 1 104.0 14.6 5
1V5KE82(C)A70.1 77.9 86.1 1 113.0 13.3 5
1V5KE91(C)A77.8 86.5 95.5 1 125.0 12.0 5
1V5KE100(C)A85.5 95.0 105.0 1 137.0 11.0 5
1V5KE110(C)A94.0 106.0 116.0 1 152.0 9.9 5
1V5KE120(C)A102.0 114.0 126.0 1 165.0 9.1 5
1V5KE130(C)A111.0 124.0 137.0 1 179.0 8.4 5
1V5KE150(C)A128.0 143.0 158.0 1 207.0 7.2 5
1V5KE160(C)A136.0 152.0 168.0 1 219.0 6.8 5
1V5KE170(C)A145.0 162.0 179.0 1 234.0 6.4 5
1V5KE180(C)A154.0 171.0 189.0 1 246.0 6.1 5
1V5KE200(C)A171.0 190.0 210.0 1 274.0 5.5 5
1V5KE220(C)A185.0 209.0 231.0 1 328.0 4.6 5
1V5KE250(C)A214.0 237.0 263.0 1 344.0 4.5 5
1V5KE300(C)A256.0 285.0 315.0 1 414.0 3.8 5
1V5KE350(C)A300.0 333.0 368.0 1 482.0 3.2 5
1V5KE400(C)A342.0 380.0 420.0 1 548.0 2.8 5
1V5KE440(C)A376.0 418.0 462.0 1 602.0 2.6 5
* For bidirectional parts with VRWM<10V, the IRmax limit is doubled.

1V5KE6V8(C)A - 1V5KE440(C)A
1V5KE6V8(C)A - 1V5KE440(C)A, Rev. D
Transient Voltage Suppressors
(continued)
Typical Characteristics
0 25 50 75 100 125 150 175 200
0
1.25
2.5
3.75
5
Lead Temperature [ºC]
Power Dissipation [W]
0 25 50 75 100 125 150 175 200
0
25
50
75
100
Ambient Temperature [ºC]
Pulse Power [%]
12 51020 50100
10
20
50
100
200
Number of Cycles at 60Hz
Peak Forward Surge Current, IFSM [A]
T = T max
8.3ms Single Half Sine-Wave
JEDEC Method
A A
UNIDIRECTIONAL ONLY
0.0001 0.001 0.01 0.1 1 10
0.1
1
10
100
Pulse Width [ms]
PulsePower[kW]
T = 25 C
º
A
01234
0
50
100
150
Time [ms]
Peak Pulse Current [%]
T = 25 C
º
A
Pulse Width (td) is Defined
as the Point Where the Peak
Current Decays to 50% of Ipp
10/1000µ
µµ
µsec Waveform
as Defined by R.E.A.
tf = 10µ µµ
µsec
e-kt
Peak Value
Ippm
Half Value-Ipp
2
td
5 10 20 50 100 200 500
10
100
1000
10000
Reverse Voltage, VR[V]
Total Capacitance, CT[pF]
T = 25 C
º
A
f = 1.0 MHz
Visg = 50m Vp-p
Measured at
Zero Bias
Measured at
Stand-Off
Voltage (V mw)
Unidirectional
Bidirectional
Unidirectional
Figure 1. Peak Pulse Power Rating Curve Figure 2. Pulse Derating Curve
Figure 3. Pulse Waveform Figure 4. Total Capacitance
Figure 5. Steady State Power Derating Curve Figure 6. Non-Repetitive Surge Current

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRC ILDS PRODUCTS ARE NOT AUT ORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WIT OUT T E EXPRESS WRITTEN APPROVAL OF FAIRC ILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
MICROWIRE
OPTOLOGIC
OPTOPLANAR
PACMAN
POP
Power247
PowerTrench
QFET
QS
QT Optoelectron cs
Qu et Ser es
FAST
FASTr
FRFET
GlobalOpto solator
GTO
H SeC
I2C
ISOPLANAR
L ttleFET
M croFET
M croPak
Rev. H5
â
ACEx
Bottomless
CoolFET
CROSSVOLT
DenseTrench
DOME
EcoSPARK
E2CMOSTM
EnS gnaTM
FACT
FACT Qu et Ser es
SILENT SWITCHER
SMART START
SPM
STAR*POWER
Stealth
SuperSOT-3
SuperSOT-6
SuperSOT-8
SyncFET
T nyLog c
TruTranslat on
ââ
â
STAR*POWER is used under license
UHC
UltraFET
VCX
â