Falconeyes RC-6 User manual

F) FCC Warning Statement
E) Attention
Thank you for purchasing FalconEyes’ products.
For further details of our related products, please contact your
local distributor or visit our webpage at www.falconeyes.com.hk
Thank you.
Please read this manual carefully before using this product.
E-mail: [email protected]
Website: www.falconeyes.com.hk
FM1909_RC-6_eng
1.Make sure the power is off after use.
2.Since there can be high voltage inside the unit, Do NOT open or repair the unit
yourself. If there is any defect, please contact an experienced technician.
3.Keep the environment dry and ventilated when using the product. Do not leave or
use the flash in humid or dusty environment.
4.Do NOT apply pressure to the product.
5.Read this manual carefully before using the product.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This equipment
has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
3
RC-6 Instruction Manual
This device complies with Part 15 of the FCC rules. Operation is subject to the following
twoconditions: 1) this device may not cause harmful interference, and 2) this device
must acceptany interference received, including interference that may cause undesired
operation.

D) Specifications:
Model no.：
Voltage 1.5V AA Battery
Remote distance 20 M
Frequency 2.4GHz
Size (LxWxH)
LCD Display
√
Weight
RC-6
102 x 66 x 24 mm
92 g
B) Panel Diagram
A) Product Overview C) Operating Instructions
12
RC-6 remote control is equipped with LCD screen and built in
2.4GHz. It can control single or multiple lights, the remote has 4 chan-
nels and users can adjust the channels base on their needs. Please set
the same channel between light and remote for the single light control,
and users may control multiple lights by setting all the lights in same
channel. Users can adjust the lights easily by using the RC-6.
1. After install the battery and switch on the RC-6, users can adjust the color
temperature, dimming and channel by the adjustment knob.
2. After switch on the remote, the LCD screen will show the color temperature
and dimming.
① Color temperature adjustment
After switch on the remote Fig1, press the adjustment knob once. The “:”
(behind “c”) will flash and user may adjust the color temperature (3000k-
5600k) by the adjustment knob.
② Dimming adjustment
After switch on the remote Fig1, press the adjustment knob twice. The “:”
(behind “DIM”) will flash and user may adjust the dimming (0-100%) by the
adjustment knob.
③ Channel adjustment
After switch on the remote and press the adjustment knob thrice Fig2. The “:”
(behind “CH”) will flash and user may adjust the channel (OFF-4) by the adjust-
ment knob.
16
7
8
2
3
4
5
1.LCD Display
2. Power switch
3.Adjustment knob
4.Battery bay
5.Battery cover
6.Color temperature
7.Dimming
8.Channel
Fig.1 Fig.2