Page: 10/16
1: when the machine is powered on for the first time, the buzzer will shout, and then the
machine will get into standby status.
2: Power Key: press the key to turn on and turn off the machine. In the case of power on,
press the key to turn off the machine; in the case of power off, press the key to turn on the
machine.
3: Mode Selection Key: In the case of power on, press the key to switch between cooling
→ dehumidification →fan → heating (single cold with no such function) → cooling → ...
mode.
4: Up Key and Down Key: press the two keys to change the set temperature or timing sett
value, operate as follows:
While setting temperature, press up key or down key to select the required temperature (not
available in fan or dehumidification mode).
While setting timing value, press up key or down key to select the required timing value.
Simultaneously press both keys to switch between Celsius (℃) and Fahrenheit (℉).
5: Fan Speed Selection Key:
In cooling mode, press the key to select high, medium or low wind speed operation.
In fan mode, press the key to select high, medium or low wind speed operation.
In heating mode, press the key to select high, medium and low wind speed operation.
In dehumidification mode, pressing the key is invalid, and the fan will forcibly choose
low wind speed operation.
6: Timing Key:
In the case of power on, press the key to close timing; in the case of power off, press
the key to open timing.
Press the key, when the timing symbol flashes, press up and down key to select the
required timing value.
Timing values can be set within 1-24 hours and the timing value is adjusted upwards
or downwards by one hour.
7: Sleep Mode:
In the cooling/Heating Mode,Press the UP and Fan Key to turn on the sleep
mode,then the unit will work on Energy-Saving and quiet type.
Note: * Can not turn on the sleep mode in the dehumidifying or Fan mode!
