F&V R-3 User manual

Safety tips
To prevent damage to your F&V product or injury to yourself or to others.
Read the following safety precautions in their entirety before using this
equipment. Keep these safety instructions where all those who use the product
will read them.
9LGHR/LJKW
59LGHR/LJKW8VHU*XLGH
)9
5

Warning
To prevent fire or electric shock, Please do not let the rain hit the device or humid
1. use of non-original match or without of the provisions power supply voltage will
damage.
2. Should you notice smoke or an unusual smell coming from the equipment cut off
the power. Taking care to avoid burns. Continued operation could result in injury.
After cut off the power,take the equipment to a F&V service center to inspection.
3. Do not disassemble. Touching the product’s internal parts could result in injury.
In the event of Malfunction, the product should be repaired only by a qualified
technician.Should the product break open as the result of a fall or other accident,
Cut off the power or AC adapter and then take the product to a F&V service center
to inspection.
4. Storage and transportation process, please keep out the power separation from
equipment, To prevent contact switch, causing no long-term use of temporary
nursing equipment, caused a fire.
5. Keep out of reach of children. Failure to observe this precaution could result in injury.
6. Observe(Option) proper precautions when handling batteries. Batteries may leak
or explode if improperly handled.Observe the following precautions when handling
batteries for use in this product.
Use only batteries approved for use in this equipment..
Do not short or disassemble the battery.
Be sure the product power is off before replacing the battery.
Do not expose the battery to flame or to excessive heat.
Do not immerse in or expose to water.
Observe proper precautions when handling the battery charger.
Keep dry. Failure to observe this precaution could result in fire or electric shock.
Dust on or near the metal parts of the plug should be removed with a dry cloth.
Continued use could result in fire.
Do not handle the power cable or go near the charger during thunderstorms.
Failure to observe this precaution could result in electric shock.
Do not damage, modify,or forcibly tug or bend the power cable. Do not place it
under heavy objects or expose it to heat or flame. Should the insulation be
damaged and the wires become exposed. Take the power cable to a F&V service
representative for inspection. Failure to observe this precaution could result in fire
or electric shock..
Do not handle the plug or charger with wet hands, Failuer to observe this
precaution could result in electric shock.
-1-

Use dry soft cloth to clean photographic lights. You can wash with a cloth slightly
some neutral detergent to remove difficult to remove the dirt, and then with a soft
cloth to dry.
Do not use strong cleaning agents, such as thinner, gasoline or alcohol, as these
solvents may damage the surface of the protective layer
The device can be installed in the camera lights for photography.
Can only be used for general-purpose interface of the camera.
Photography lights ON / OFF can be controlled in the standby mode.
Features
1. Please do not directly face the light bulb when the
Photography lights ON.
2. Never block the ventilation grille by covering it with paper
or clothes . could result in injury.
3. Do not expose the equipment to moisture. or it could Short
circuit result in injury.
4. Do not placed the photographic lights in nearby such as alcohol
or gasoline and other flammable or volatile solvents
5. When the camera light on or against the other items above, please
turn off the camera light, or else they may cause fire or damage to photographic
light.
6. Do not seize the photographic light head to take up photography cameras.
Working Voltage
Average Life time
Illuminance (LX)
Color rendering
Soft mode
Box volume
Color temperature adjustment filter (option)
Amber film 3000K Amber film 4000K Red(R) Green(G)
Bule(B) Yellow (Y) Magenta (M) Cyan(C)
Notes
Specifications
Notes on the clean
7.4V
30000 h
500

Soft-film standard
230 x 147 x 97mm
Watt loss
Cooling mode
Color temperature (K)
Illumination angle
Packing Piece
10w


3000k standard filter
30 PCS
color temperature
Transform
Heat sinks, natural
ventilation
-2-

Standard Package contains:
-3-
A Photography lights will be installed in the camera or
photographic camera lights before removed, is required to set
the power switch in OFF.
Parts diagram
1. Dimming switch
2. Mains switch on/off
3. Battery lock
4. Hot shoes fastening
intortum
5. Barn door
6. Soft-film
7. Amber film
Photography lights installed
1. Rotating photographic lights, make
it with the consistent direction of the
camera lens
2. Photography lights interface will be
inserted into the interface of the
camera concave-shaped
3. Clockwise rotating locking until
locked in place
Photographic lights removed
The opposite direction along the arrow anti-clockwise rotating locking to Release it
The opposite direction along pull out the photographic light, removed it
The use for photographic light
1. To following the picture to install the battery, when heard a weak "pyridaben
carbazole" sound the installation is completed.
2. When need to replace the battery push the battery lock in accordance with the
arrow direction to promote the battery can be unloaded.
3. When you turn on the photographic light please set the power switch to "ON"
4. When you turn off the photographic light please set the photographic light to "OFF
5. To following the picture to push dimmable it will be adjust the illumination scope

6. According to filming luminous efficiency need to select color temperature, Without
the filter Color temperature is 5600K for daylight. Use the Amber film the luminous
efficiency color temperature is 3000K.
7. Want Soft, you can use the equipment soft-film. soft-film can also working with the
Amber film in the same time.
1. R-3 LED lamp holder one Piece (Including Amber film 3000K one piece, Soft-film
one piece,barn door two piece).
2. NP-F550 battery one piece.
3. NP-F550 battery charger one piece.
4. 1/4 double-spigot screw adapter one piece
5. Instruction manual.
Design and specifications subject to change without notice.
%







3
1

1. When the electric will run out of time, power
will be cut off, after few seconds it will re-
open, it can still light up a few seconds,then
will be cut off again. Please replace the
batteries at this time, to prevent influence
onuse.
2. After use Please set the power switch to
"OFF"
3. When not in use, please remove the battery
and then bring photographic lights stored
in boxes.
4. In storage before, make sure photography
lights are cool.
Lighting for photography objects
When using this device in indoor
photography, you get beautiful clear color
image.
For ultra-wide angle photography,
photography light images may not be able
to complete the line shine. Please effective use of photography has been light
on the mainǂphotography objects on camera.
In photography under fluorescent screen may make some shine. Light may
improve the use of photographic color film of the ambiguity in order to better
screen quality.
C
A
B
C
DIMMER






Note