Fantasea FD-80 User manual

Fantasea FD-80 Housing
User's Manual

2
Table of Contents
TABLE OF CONTENTS ............................................................................................................................ 2
INTRODUCTION........................................................................................................................................ 3
INCLUDED WITH HOUSING.................................................................................................................. 4
CAMERA MODEL ..................................................................................................................................... 4
A VARIETY OF USES................................................................................................................................ 5
SPECIFICATIONS...................................................................................................................................... 5
CONTROLS ORIENTATION................................................................................................................... 6
CONTROL DETAILS................................................................................................................................. 9
TRAY & HANDLE SYSTEM ASSEMBLY ........................................................................................... 13
PREPARATION OF HOUSING BEFORE THE DIVE........................................................................ 15
USING EXTERNAL STROBES:............................................................................................................. 18
CARE & MAINTENANCE ...................................................................................................................... 18
BASIC SHOOTING TECHNIQUES....................................................................................................... 20
CAMERA LENSES AND PORTS........................................................................................................... 22
FANTASEA FD-80 WARRANTY ........................................................................................................... 22

3
Introduction
Fantasea has introduced a new housing for the Nikon D-80 and the FD-80 is the result. Continuously
improving features include, embedded optical view finder, enhanced trigger/shutter control system, new
port mounting system, zoom lens capability, new aluminium B and J Handle design and separate button
for On-Off control.
Welcome to the exciting world of underwater digital SLR photography. Your purchase of the FD-80
housing for the Nikon D-80 digital camera will set you apart from other photographers. With this system,
you will enjoy the best chance of capturing the widest variety of superior underwater images. The FD-80
offers you the opportunity to use the exact Nikon lenses for the best circumstances, including a choice of
macro, wide angle, fisheye, and zoom lenses. You will find the housing to be easy and instinctive to use
and handle and will have countless dives in which to experiment with the D-80's advanced imaging
capabilities. Fantasea Line Photo is pleased to offer our help with any of your photographic needs.
The purpose of this manual to is to provide you with the basic introduction to your FD-80, which should
get you comfortable with the housing and allow you to get started taking great underwater images right
away. We strongly urge you to thoroughly read the Nikon D-80 instruction manual as well, to familiarize
yourself with the most common controls and settings that you will use for your underwater photography.
The FD-80 housing will permit access to most of the important controls on the camera. To take full
advantage of these features, it is best to have a good command of what each option can do for you, so you
will know when you should use each specific control.

4
Included With Housing
The FD-80 housing consists of a front and back shell that latch together to form the housing
body.
A screw in standard flat port is included. This port will accommodate the 18-80mm lens
(without a manual zoom control). Other optional ports are available for different lenses ( 5
inch super wide angle Dome Port, 60 mm macro/close up port and 105 mm super macro
port)
Two Aluminium B and J housing handles come with your housing, ( due to packaging
restrictions they may need to be assembled by the customer). These handles include 1”
(25mm) round ball mounts which integrate nicely with most B and J Arm systems, making
for easy integration with most all underwater lighting and flash systems. The handles are
easily assembled by tightening one screw head per handle. They are also adjustable to fit
divers using gloves.
Base plate for mounting other tray and arm systems.
Zoom Control Guide Band that is attached to the camera lens.
Optical viewfinder eyepiece built into the back cover of the housing to assist the
photographer in viewing and focusing.
A five-pin TTL flash sync port to connect with the D-80's hot shoe.
Removable camera mounting tray that slides into position with the D-80 attached,
positioning the camera in the exact location for perfect control alignment.
Spare O-Rings for the housing and lens port.
Adjustment tools
Wrist lanyard
Warranty and other documents
Instruction Manual
Silicone
Cleaning cloth
Lens port cover
Camera Model
The FD-80 is dedicated exclusively to the Nikon D-80 camera. The size and shape of the camera, plus the
location of controls for alignment with housing controls requires this precision design. Together, the D-80
camera and FD-80 housing offer the best combination of advanced digital photography at an affordable
price. No other camera may be used in the FD-80 housing.

5
A Variety of Uses
The Fantasea FD-80 housing is more than just an underwater camera system. It protects the D-80 against
damage from such environmental conditions as rain, snow, dust, sand, and dirt. It is perfect protection for
active outdoor sports, where these elements would normally not allow an advanced camera like the D-80
to be used without danger of damage. The lightweight, compact housing and handles make it easy to hold
and use while sailing, fishing, kayaking, backpacking, or just for fun at the beach or around the pool. It
will also provide a valuable tool for many commercial, industrial, and medical applications, because it is
impervious to most liquids, and sprays.
Specifications
The FD-80 is an injection molded polycarbonate housing
The main seal between front and back halves is a Radial O-ring
The ports are sealed when mounted by 2 O-rings, one Radial and one Compression type.
Controls use stainless steel shafts, E-clips and springs
Controls are sealed by double O-rings
Control knobs and buttons are made of molded polycarbonate
Latches are stainless steel
Handles are made of plastic covered aluminium.
Flash sync port is a standard five-pin Nikonos type sync cord connector
The Fantasea FD-80 has a maximum working depth rating of 200' (60m)
Overall Size is 220 x 300 x 230 mm [LxWxH]
Housing weight approximately 2.8 kg

6
Controls Orientation
Top and Front of Housing:
Front View 1
Flash Sync Port 1
Mode Dial 2
Trigger Release Control 3
Latching Buckles 4
Power Switch 5
Exposure Compensation Control 6
Metering Mode 7
Single/Continuous/Timer/Remote Control 8
AF Mode 9
Sub Command Dial 10
Zoom Port Control 11
Focus Mode Selector 12
1
2
3
4
5
6
7
8
9
10

7
Front View
11. Zoom Port Control 12. Focus Mode Selector

8
Back & Right Side of Housing:
Delete Control 13
Playback Control 14
Menu 15
Help & Protect/White Balance 16
Thumbnail/ISO sensitivity 17
PlaybackZoom/Image Quality & Size 18
Main command Dial 19
Four Way Multi-Control [4 buttons] 20
OK Button 21
Viewfinder 22
AE-L/AF-L Control 23
13
14
15
16
22
1119
20
21
17
18
23

9
Control Details
The following is a partial list of the most common uses of housing and camera controls. For the full list of
camera functions and settings accessed by each control, you should consult your D-80 camera instruction
manual.
Please note that some of the FD-80 housing controls are designed to operate more than one camera control.
The command dial and sub-command dial will perform multiple functions when operated in conjunction
with other camera/housing controls.
Flash Sync Port: 
Connect any standard five-pin Nikonos type sync cord to this bulkhead connector.
Align the index dots to correctly position cord to seat in flash port.
Gently and carefully push down on cord to seat the O-ring seal, and make connection with the
five pins. Make sure that the pins are properly aligned and do not force closure.
Tighten collar on sync cord to insure cord does not come loose or separates while underwater
or during use.
Mode Dial 
Push down and rotate housing control to change camera’s main exposure modes. Choose
Manual, Aperture Priority, Shutter Priority, Program, Automatic or any of several Scene
Modes.
Main Shutter Release Control [Trigger]: 
The camera has a two stage shutter-release button. The camera sets focus and exposure when
the button is pressed halfway. Focus and exposure will remain locked while the shutter-release
button is kept in this position. To take the picture, press the shutter-release trigger [of the
housing] the rest of the way down.
Latching Buckles: 
Provides water tight closure to the housing. The 3 Stainless Steel buckles have a safety latch
lock which should be manually pressed into the lock position and then carefully checked to
ensure that the buckle cannot open by mistake during the dive. This can be checked by
physically trying to open the latch without depressing the lock release. If the latch does open
then you must try again to lock it down so it cannot open.
Power Switch: 
The Control Panel will turn on and the display in the viewfinder will light.
Holding the power switch in the "light bulb" position activates the exposure meters and the
control panel backlight (LCD illuminator), allowing the display to be read in the dark. After the

10
power switch is released, the illuminator will remain active while the exposure meters are
active or until the shutter is released.
Exposure Compensation Control: 
Press button and rotate command dial to choose amount of compensation.
Metering Mode: 
Press button and rotate command dial to choose Matrix Metering, Center Weighted Metering,
or Spot Metering.
Single/Continuous/Timer/Remote Control 
Shooting mode determines how the camera takes photographs: one at a time, in a continuous
sequence, with a timed shutter-release delay, or with a remote control.
To choose a shooting mode, press the button until the desired setting is displayed.
AF Mode: 
Press the AF button until the desired AF setting is displayed: AF-A (auto select), AF-S (Single-
Servo AF) or AF-C (Continuous-Servo AF).
Sub Command Dial:
Rotating dial independently changes Apertures in M or A exposure mode (Or the shutter
speed if working the reverse mode).
Rotating while pushing other control buttons affects the value represented by the control
button.
Zoom Port Control:
This button activates the zoom lens of the camera.
Attach the Zoom Control Guide Ring to the lens. This is attached using the Velcro strip. Insure
that the projected nub is directly on the bottom.
The camera and tray are inserted in such a way that the nub of the Zoom Control Guide Ring is
sandwiched between the two projections found on the lens port. All are pointed a downward
direction. The Zoom Control is operated when camera is installed in housing is this manner
using button #2
Focus Mode Selector:
Rotate the selector to choose manual focus or auto focus.
When using manual focus, the guide ring should be placed over the focus ring instead of the
zoom ring, in order to control the focus with the zoom port control. In this case there will be no
control over the zoom.
12
11
10

11
Delete Control:
To delete the photograph currently displayed in the monitor, press the delete button. A
confirmation dialog will be displayed. Press the delete button again to delete the image and
return to playback. To exit without deleting the picture, press the play button.
Playback Control:
Press housing Playback button to activate LCD monitor in Playback mode.
View any image on memory card by scrolling with the left and right arrows on the Four Way
Multi-Control.
Press housing Playback button once more, or depress shutter release half way to turn LCD
monitor off.
Menu:
Most shooting, playback, and setup options can be accessed from the camera menus. To view
the menus, press the menu button.
Help and Protect Menu/White Balance button:
Help- In the menu mode, if a “?” icon is displayed, help for the current item can be viewed by
pressing the help button.
Protect- Press the button to protect the photograph currently displayed in full-frame or zoom
playback or highlighted in the thumbnail list. The photograph will be marked with a
"protected" icon.
White Balance- To select a value for white balance, press the WB button and rotate the main
command dial until the desired setting is displayed in the control panel. White balance can also
be adjusted from the shooting menu.
Thumbnail/ISO sensitivity:
Thumbnails- To display images in “contact sheets” of four or nine images, press the button in
full-frame playback.
ISO sensitivity- ISO sensitivity can be selected by pressing the ISO button and rotating the
main command dial until the desired setting is displayed in the control panel. ISO sensitivity
can also be adjusted from the shooting menu
PlaybackZoom/Image Quality & Size:
Playback- Press the playback button to zoom in on a photograph in full-frame playback.
Image Quality- Image quality can be set by pressing the QUAL button and rotating the main
command dial until the desired setting is displayed in the control panel. Image quality can also
be adjusted from the shooting menu.
Image Size- Image size can be set by pressing the QUAL button and rotating the sub-command
dial until the desired setting is displayed in the control panel. Image size can also be adjusted
from the shooting menu.
13
14
17
15
16
18

12
Main Command Dial:
Rotating dial independently changes Shutter Speeds in M or S exposure mode (Or aperture
if working in the reverse mode).
Rotating dial independently while in P mode shifts the program exposure into flexible
program, and changes the combination of shutter speeds and apertures.
Rotating while pushing other control buttons affects the value represented by the control
button.
Four-Way Multi-Control:
Press Up and Down buttons to scroll through Menu options.
Press Left and Right buttons to make menu settings and confirm settings.
Use Left and Right buttons in Playback mode to scroll through images recorded on memory
card.
OK Button:
The OK button authorizes the selections made when the Multi selector buttons are used.
Pressing OK to authorize [confirm] your selection.
Optical Viewfinder Eyepiece
Built into the back cover of the housing to assist the photographer in viewing and focusing.
AE-L/AF-L Control:
Press and Hold the AE-L/AF-L button to lock exposure and focus prior to recomposing a
scene. The original exposure value and focus distance will remain set after re-composition.
19
20
22
23
21

13
Tray & Handle System Assembly
The Fantasea FD80 Camera Housing comes with an easy to assemble Tray & Handle system. Please
follow these instructions in order to assemble your system correctly.
The Assembled System
Step 1 –Attaching the Tray to the Camera Housing
1. Hold the Housing (Item #1) so its bottom side is facing up.
2. Position the Tray (Item #2) on top of the housing, so the three screw holes on the Tray are parallel
to the three screw holes on the Housing's black attachment plate. Please note that the tray should
be positioned in a way that the socket on the tray is facing down, towards the housing and handles.
The conical side of the Tray screw holes should be facing up.
3. Use a Philips screwdriver in order to screw the three screws you have received with the Housing
into the three screw holes on the Tray. It's important to tighten the screws only after all three
screws are in place.
Step 2 –Attaching the Handles to the Tray
Item #2
Tray
Item #1
Housing
Item #3
Handle
Item #3
Handle
Item #4
Handle Screw
Item #4
Handle Screw

14
1. Place a Handle (Item #3) on top of the end of the Tray. The Handle and Tray feature sockets that
should connect to eachother.
2. Position the handle in a comfortable distance from the Housing. Please note that positioning the
Handle too close to the Camera Housing will interfere with opening and closing the Housing's
buckles. On the other hand, positioning the Handle too far from the Camera Housing might make it
difficult to reach the Housing's control buttons while still holding the Handles.
3. Insert the Handle screw (Item #4) from the bottom of the Tray, through the track, into the Handle,
and tighten the screw.
4. Do the same for the other Handle on the other side of the Tray.
You can also find these instructions in our Customer Support Section on the website-
http://www.fantasea.com/technical.asp

15
Preparation of Housing Before the Dive
Make Common or Required Camera Settings:
Prior to inserting camera in housing, it is recommended that Menu option settings be made according to
the preferences of the user. Most of these choices are ones that will remain unchanged for most of the time
while diving, and therefore it will be more convenient and less time consuming to make the settings prior
to diving.
Mount Housing Port:
Clean & Lubricate Port O-rings
1. In order to properly maintain the Port O-rings you must periodically remove port O-rings
from channel using only your fingers.
2. Push and lift the O-ring from its channel.
3. Do NOT use any sharp instruments, such as knives or dental picks, to remove O-ring. You
may accidentally cut the O-ring causing a potential leakage.
4. Inspect the O-ring visually and by feel for any cuts, nicks, flat spots, stretching, or any
debris, such as sand, dirt, lint, hair, or other matter that could compromise the integrity of
the seal.
5. Clean O-ring by soaking in fresh water until all debris is removed.
6. Dry O-ring with a soft clean cloth. Be careful it does not leave any lint on the O-ring.
7. Lubricate the O-ring with the supplied silicone grease. Do not over-grease the O-ring. It
only requires enough grease to allow it to slip into place and make a seal. It should be
slippery and shiny but without any abundance or build-up of grease. A teardrop amount is
usually sufficient for proper lubrication.
8. Inspect the O-ring channel for any debris or foreign matter that could damage the O-ring or
cause it to lose its seal.
9. Clean the O-ring channel using a damp cloth or Q-tip. Be careful not to leave any lint
behind.
10. Replace the O-ring in the channel by lifting it over the end of the port until it sits in its
channel. Be sure the O-ring is not twisted or deformed and out of position in any way.
11. Mount the port on the housing body by aligning the threads on the end of the port with the
mount on the housing and screwing clockwise until it is FULLY screwed in place.

16
Note 1:
The FD-80 lens port uses 2 O-rings (one Radial O-ring and one
Compression seal O-ring) for a watertight seal. Radial O-rings are
affected by friction when closing the seal, as it rubs against a housing
wall. Therefore a radial O-ring, such as the O-ring on the port, requires
lubrication.
Note 2
Lubrication of an O-ring does not improve the seal. It only reduces the
amount of friction on the O-ring when it is being moved into sealing
position. The amount of lubrication required on the port O-ring is only
enough to allow it to slip into place without friction, so it does not twist or
become dislodged. More grease is not better, and could in some cases
have a negative affect if it is applied in large amounts to form a build-up
that could trap any debris or foreign matter.
Open Housing:
Release all three latches at same time, and lift off back half to open housing.
Opening the levers- To overcome the friction of opening, two levers are used to push
against the lid with a cam action. See picture attached.
Important!
Be sure they are inserted all the way flat to the
housing before turning to avoid damaging the
protrusions on the lid.
Inspect and clean main O-ring:
Use a clean wet cloth. Use only water to clean the O-ring sealing surface.
Do not remove the O-ring unless there is evidence that there is a need to clean the underside
surface, or the channel it sits in.
If the O-ring does need to be removed for cleaning or replacement, use your two thumbs and at
the top corner of the housing where the O-ring groove is, push up from both side until a corner
of the O-ring raises above the groove and gently grasp this O-ring section and pull it off the
housing.
When replacing the O-ring, place it back into the groove starting at the same corner and gently put it in by
pressing it into the groove all around the housing until it is all sitting in the groove and no part of it is

17
sticking up or out of the groove. You can then apply a slight layer of silicone if you have not done this yet.
Be sure it is completely seated in the channel for a proper seal.
Attach the Zoom Control Guide Ring to the lens:
This is attached using the Velcro strip. Insure that the projected nub is directly on the bottom
when you wrap it around the lens.
The camera and tray are inserted in such a way that the nub of the Zoom Control Guide Ring is
sandwiched between the two projections found on the lens port of the housing. All are pointed
a downward direction. The Zoom Control is operated when camera is installed in housing and
button # 2 moved in an upward or downward direction.
Insert D-80 camera and lens in housing:
Mount camera and lens on the removable tray, using the tripod screw.
Slide the tray and camera into the housing tray slot. Make sure it is completely inserted.
Slide the flash sync cord into the D-80's hot shoe.
Align the housing controls with the corresponding buttons on the camera. Take caution to
insure the flat sync cord does not get caught in the housing seal by storing the slack alongside
the left side of the camera.
Place housing back over front and align the complete mating surface of the housing and the
gasket, forming a proper seal.
Position all three latches over latch hooks in ready position.
Close all three latches at one time. If it is not possible to close all three latches at the same time,
close the bottom latch first, maintaining pressure on the other side. Then close the two side
latches simultaneously. Test all latches carefully to make sure that that are completely locked
into place and not just pushed down. Try to open them without depressing the “Lock Release”
to make sure that they cannot open accidentally.
Inspect the O-ring seal for proper closure. A complete seal can be visually confirmed by
looking for the black line made by the gasket around the complete circumference of the
housing.
Take a Test Dive:
Make the first dive without camera in housing. This will give
you a chance to inspect the housing seal for proper closure. In this
case, any mistakes will not result in the loss of the camera.
Operate all controls under pressure in the water and inspect for
watertight seal.
Before all dives, immerse the housing in the camera rinse tank,
and press all buttons, to visually inspect for any leakage.
While descending on every dive carefully observe the housing. If
you see any bubbles rising from it or water entering surface
immediately while holding the lens port in a downward position.
Once on dry land carefully open the housing, take out the camera
and dry it off if any water is on it and check to see if there is any
damage. Please inspect the housing, rinse it in fresh water, dry it
out and then take a dive without the camera in the housing to
check for leaks or other malfunctions.

18
Recommended Initial Camera Settings:
Set D-80 on M (Manual) Exposure Mode
oThis is to keep the built-in flash from trying to pop up in low ambient light.
oThe Auto Exposure Modes are not always appropriate for underwater
photography.
Set camera to AF focus mode
Use menu option to set camera for Focus Priority Release mode.
Set Camera to Single Advance Mode
Choose Matrix light meter. This will provide the most sophisticated light meter for evaluating
complicated and fast changing ambient light conditions.
oThe Matrix meter in the D-80 is a 1,005 sensor RGB light meter, insuring
the most accurate evaluation of the ambient light.
Set ISO to desired sensitivity setting. Use ISO 200 for the least amount of noise (digital grain),
when possible.
Set personal preferences by using camera menus.
Using External Strobes:
Compatible Strobes include any that can use the standard Nikonos five pin TTL sync. These strobes will
have to be used in the Manual Flash Exposure mode.
Nikon Speedlights, such as the SB-600 and SB-800 can be used with the D-80 in the iTTL
Auto Flash Exposure mode.
Connect the strobe sync cord to housing's bulkhead sync port. On the side of the housing port
notice a simple alignment indicator [dot] The 5 pin cord contains a small channel [groove]
between two of the female pins of the cord. You must insert the cord into the port so the
groove is aligned with the indicator of the housing. This assures proper alignment. Hold firmly
in place while fastening locking screw. Tighten the collar to secure the cord in place.
The O-ring on the end of the sync cord should be inspected, cleaned and lubricated in the same
way the port O-ring was treated.
Using different B and J arm systems can be accommodated by attaching to the 1 “ (25mm)
Aluminium ball on the top of the FD-80’s handles. Fantasea offers a full range of Aluminium
B and J arm sets and fittings.
Care & Maintenance
Before a dive:
oProtect the FD-80 from sun and heat. This will reduce the possibility of
fogging due to condensation of the warm, moist air inside the housing when
immersed in the colder water. It also reduces the possibility of sun damage
to the polycarbonate. An insulated camera bag is a good means of protection
from overheating.

19
oProtect the FD-80 from accidental impact damage. Secure the housing and
camera in a safe location on the boat or in any vehicle, so it does not bounce
around or bump into other cameras and housings. The insulated bag
mentioned above should be padded for this reason. Do not leave the camera
and housing in a camera rinse tank or bucket on the boat in route to the dive
site. Rough conditions can cause impact damage and photo gear can often
get tangled if too many systems are together in the tank.
oInspection of all user serviceable O-rings should be a routine pre-dive check.
Required maintenance for the main O-ring involves cleaning and
occasionally a small amount of silicone grease (if there is no damage
requiring replacement). Use the silicone grease supplied with the housing.
Use only enough grease to lightly cover the O-ring to reduce friction as it is
put into its place and the seal is made. Over-lubrication should be avoided
and can result in debris accumulating on the O-ring, and compromise the
seal.
oIt is highly recommended that the housing be immersed in the rinse tank or
in shallow water before every dive and all its controls operated to visually
confirm that it is watertight before descending to depth.
After a dive:
oRinse the housing with a strong stream of fresh water. Let it soak for about
20 minutes to allow the water to dissolve any salt residues under the controls
or in tight spaces.
oOperate all the controls while the housing is soaking to help dislodge any
salt residue that may be caught under or around the controls.
oDip the housing vigorously several times to agitate the final remains of salt
from the narrow areas or around the controls.
oDetach sync cords, arms & brackets for overnight storage. This will greatly
reduce the possibility of electrolysis and corrosion that can build up between
similar metals on the housing.
oDry with a clean towel or allow drying naturally in a cool shady place.
Traveling:
oUse protective hard case when traveling to protect the camera and housing
from impact damage.
oIf possible, do not check camera and housing case on airlines. Use a hard
case that can fit under the seat or in the overhead compartment of aircraft,
and hand carry.
Annual Maintenance and Storage:
oThe housing’s main gasket and port O-ring should be replaced every year or
more often if used frequently. The frequency of replacement depends on the
user’s inspection of these seals and their condition at the time. If in doubt, it

20
is always better to change them in order to not take the chance of flooding
the housing.
oThe seals on each of the controls should be replaced every couple of years
or more often if needed. The best indicator of the need for replacement is if
the controls become harder to operate due to a build up of salt or corrosion.
oStore housing in a cool, dry location when not traveling. It is recommended
that the housing be stored with the two halves together, but not with the
latching buckles closed. This will take the constant compression off the
main gasket. It is also recommended that the housing is not stored with the
port mounted.
Basic Shooting Techniques
Practice handling the FD-80 on land.
oGetting familiar with the location and movement of all the controls and how
the changes in settings can affect your image is an important part of the
process. It is better to learn the basics of the camera’s operation on land,
rather than when first underwater. It is faster to operate the camera out of the
housing and you will not have the limited time frame as you would if you
were underwater.
Focusing and Shutter release control.
oGet used to operating this control on the camera in both half depress, and
full depress movements. You will frequently depress the shutter release only
half way to activate the exposure meter and auto focus to preview the
shooting conditions and make setting changes. Once you get the feel for
operating the camera control directly, you can then try it in the FD-80, using
the housing’s trigger control in the same manner.
Use the viewfinder eyepiece
oCompose and view exposure information display. It is very important that
you become familiar with the information display in the viewfinder so you
can make proper exposure settings and know what other settings have been
made. You will use this often and it is good to become familiar with it
before attempting to read it underwater. Also practice composing and
focusing the camera by eye, before using it underwater to get the feel for
this operation as well.
Changing Exposure Settings
oUsing the camera in its Manual (M) Exposure Mode gives you the ability to
change either shutter speeds or apertures to control the exposure the way
you want. Get used to making these changes while your eye is in the
viewfinder and you are referencing the LCD display for guiding you in the
exposure process. The command dial is set to change shutter speeds, and the
sub-command dial is set to change apertures. Practice operating each of
these controls so they become instinctive in operation.
Familiarize yourself with the movements required