Farberware 201627 User manual

Immersion Hand Blender
Model Number: 201627
UPC: 655772-01627-0
Customer Assistance
1-855-451-2897 (US)
Please consider the option to recycle the packaging material.
Immersion Blender_201627_IM_US_V4_170620.indd 1 6/20/17 10:14 AM

2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed, including the following:
• Read all instructions before use.
• Do not touch hot surfaces. Use handles or knobs.
• WARNING - to protect against electric shock, fire and personal injury:
-do not immerse cord, plug or motor unit in water or other liquids;
-do not immerse the appliance or any electrical components in water or
any other liquids;
-always switch off and unplug the appliance before cleaning.
• This appliance should not be used by children and care should be taken
when used near children.
• Unplug from wall outlet when not in use, before putting on or taking o
parts, and before cleaning. Allow to cool before putting on or taking o
parts, and before cleaning the appliance.
• Avoid contacting moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the
appliance malfunctions or is dropped or damaged in any manner. Call our
toll-free customer assistance number for information on examination,
repair, or electrical or mechanical adjustment.
• The use of accessory attachments not recommended or sold by the
appliance manufacturer may result in re, electric shock or injuries to
persons.
• Do not use outdoors or in a damp area.
• Do not let power cord hang over edge of table or counter.
• Do not let cord contact hot surface, including the stove.
• When mixing liquids, use a tall container or make small quantities at a
time to reduce spillage.
• Keep hands and utensils out of the container while blending to prevent
the possibility of severe injury to persons or damage to the unit. A scraper
may be used but must be used only when the unit is not running.
• Be certain lid is securely locked in place before operating appliance.
• Keep hands and utensils away from the cutting blade while chopping
food to reduce the risk of severe injury to persons or damage to the food
chopper. A scraper may be used but only when the food chopper is not
running.
• Blades are sharp. Handle carefully.
• Never leave the appliance unattended during use.
SAVE THESE INSTRUCTIONS!
Immersion Blender_201627_IM_US_V4_170620.indd 2 6/20/17 10:14 AM

3
IMPORTANT SAFEGUARDS
• To switch o the appliance, release the button and remove plug from
wall outlet.
• Do not place the appliance close to the edge of the countertop.
• Never pull on the cord to disconnect the appliance from the wall outlet;
instead, grasp the plug and pull on the plug.
• Do not use appliance for other than intended use.
• Do not blend ice or dry ingredients.
• Let the appliance cool completely before putting away or storing.
• Do not clean with metal scouring pads. Pieces can break o the pad and
touch electrical parts involving a risk of electric shock.
ADDITIONAL SAFEGUARDS
This appliance is for HOUSEHOLD USE ONLY.
WARNING:
-DO NOT OPERATE THIS APPLIANCE, IF THE POWER CORD SHOWS
DAMAGE OR IF APPLIANCE WORKS INTERMITTENTLY OR STOPS
WORKING ENTIRELY.
• A short power-supply cord is to be provided to reduce the risk resulting
from becoming entangled in or tripping over a longer cord.
• Longer extension cords are available and may be used if care is exercised
in their use.
• If an extension cord is used:
-The marked electrical rating of the extension cord should be at least as
great as the electrical rating of the appliance.
-The longer cord should be arranged so that it does not drape over
the countertop or table top where it can be pulled on by children or
tripped over unintentionally.
Polarized plug
• This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to t into a
polarized outlet only one way. If the plug does not t fully in the outlet,
reverse the plug. If it still does not t, contact a qualied electrician. Do
not attempt to modify the plug in any way.
• Do not let children handle or put the electrical cord into their mouths.
SAVE THESE INSTRUCTIONS!
Immersion Blender_201627_IM_US_V4_170620.indd 3 6/20/17 10:14 AM

4
PARTS
14
1011
15
1
2
3
4
5
6
7
8
9
13
12
1. Hanging loop
2. Power cord with plug
3. High speed button Hi
4. Low speed button Lo
5. Blending base
6. Coupling
7. Chopping bowl lid
8. Chopping blade
9. Chopping bowl
10. Whisk attachment
11. Blade attachment
12. Potato masher attachment
13. Masher coupling
14. Blending jar
15. Storage stand
Immersion Blender_201627_IM_US_V4_170620.indd 4 6/20/17 10:14 AM

5
ILLUSTRATIONS
a
1.
2.
3.
bc
de
2. 1.
f
1.
2.
gh
1.
2.
i
1.
2.
j
2.
2.
1.
1.
k
1.
2.
l
Immersion Blender_201627_IM_US_V4_170620.indd 5 6/20/17 10:14 AM

6
ILLUSTRATIONS
m n o
2.
1
p q r
s t
OPERATION
Before rst use
• Remove all packaging materials, labels and/or stickers from your appliance.
• Check package to verify all contents are included and undamaged. Do not
operate the appliance if the contents are incomplete or appear damaged. Return
it immediately to Walmart.
Immersion Blender_201627_IM_US_V4_170620.indd 6 6/20/17 10:14 AM

7
OPERATION
Danger of suocation!
• Packaging materials are not toys. Always keep plastic bags, foils and foam parts
away from babies and children. Packaging material could block airways and
mouth and prevent breathing.
• Clean the appliance thoroughly before using for the first time ( Cleaning and
Maintenance)
USING THE STORAGE STAND
The storage stand can hold the appliance and all accessories when not in use.
• Fold up the storage stand (15) and ensure it locks in its final position with a
noticeable click (ill. a).
• Place the accessories into their designated areas (ill. b).
NOTE:
-The holder for the appliance is designed to hold the blending base (5) with
attached blade attachment (11).
ASSEMBLY
WARNING:
-Do not connect the appliance to a wall outlet unless it is fully assembled
(ill. c).
-The blades are very sharp. Always handle the blade attachment (11) and
the chopping blade (8) with care. Do not touch the blades as this may cause
injuries (ill. d).
Blade attachment
• Attach the blade attachment (11) by aligning the coupling (6) onto the blending
base (5) and secure it by turning it counter-clockwise until locked in position with
a noticeable click (ill. e).
Chopper assembly
• Place the chopping bowl (9) on a clean, flat and stable surface.
• Remove the chopping bowl lid (7) from the chopping bowl (9) by turning it
counter clockwise and lifting it up when unlocked (ill. f).
• Fill the food to be processed into the chopping bowl (9) (ill. g).
• Add the chopping bowl lid (7) and lock it by turning it clockwise (ill. h).
Immersion Blender_201627_IM_US_V4_170620.indd 7 6/20/17 10:14 AM

88
ASSEMBLY
• Add the chopping bowl lid (7) to the chopping bowl (9) while observing the
alignment of the locking mechanism and the coupling to the chopping bowl (9).
Turn the chopping bowl lid (7) clockwise to lock it. Make sure the chopping bowl
lid (7) locks in place with a noticeable click (ill. h).
Whisk attachment
• Attach the whisk attachment (10) by aligning the coupling (6) onto the blending
base (5) and secure it by turning it counter-clockwise until locked in position with
a noticeable click (ill. i).
Potato masher attachment
• Attach the potato masher attachment (12) to the masher coupling (13) (ill. j).
• Attach the masher assembly by aligning the coupling (13) onto the blending
base (5) and secure it by turning it counter-clockwise until locked in position with
a noticeable click (ill. k).
USING THE APPLIANCE
This appliance can be used for blending of cooked or raw vegetables and fruits,
chopping hard foods, such as seeds or nuts, whisking liquids such as whip cream,
mashing ingredients such as potatoes or light dough.
This appliance is not intended for blending hot liquids or foods or to be used with
ice.
NOTE:
-The appliance has a rated power of 300W. Before plugging it into the wall
outlet, ensure that the electrical circuit is not overloaded with other appliances.
This appliance should always be operated on a separate 120V ~ 60Hz wall
outlet.
• Place the appliance on a clean, flat and stable surface.
• Assemble the appliance according to the required operation and the food to be
processed ( Assembly).
• Combine the ingredients in the blending jar (14) (ill. l) or a suitable container
(e. g. for mashing) ( Blending/Chopping/Whisking/Mashing).
Immersion Blender_201627_IM_US_V4_170620.indd 8 6/20/17 10:14 AM

9
USING THE APPLIANCE
WARNING:
-Do not operate the appliance continuously for more than 1 minute. Do not
operate the appliance continuously for more than 15 seconds without load.
Allow the appliance at least 3 minutes to cool down between operation cycles.
Operate the appliance for a maximum of 3 consecutive cycles, after which,
allow the appliance to cool down for at least 10 minutes before the next use.
Do not exceed the maximum operation cycles.
-Do not overfill the container to avoid spilling or food entering the blending
base (5).
-Only use accessories recommended by the manufacturer. Do not attach any
other attachments onto the appliance.
-Always inspect attachments before each use. Do not use cracked, bent or
damaged attachments.
• Connect the plug (2) into a wall outlet (ill. m).
• Immerse the attachment (10, 11, 12) in the container with prepared ingredients
or attach the blending base (5) to the chopping assembly (ill. h).
• Press and hold the low speed button Lo (4) to start the operation (ill. n).
Use the high speed button Hi (3) for higher speed operation.
• Once the ingredients have reached the desired consistency, release the low
speed button Lo (4) to switch off the appliance (ill. o).
• Withdraw the attachment (10, 11, 12) from the container (ill. o) or release the
blending base (5) from the chopper assembly.
• Disconnect the plug (2) from the wall outlet (ill. p).
• Remove the attachment (10, 11, 12) or the chopper assembly from the blending
base (5) by turning it clockwise (ill. q).
• Pour the processed food into a suitable container, when necessary.
NOTE:
-When blending/whisking/mashing, slowly move the appliance through
the food, upward, downward and sideways to ensure the ingredients are all
processed equally (ill. r).
-Do not press both low speed button Lo (4) and high speed button Hi (3) at the
same time.
Blending
NOTE:
-Peel or core any fruits or vegetables and cut them into small chunks. Cut solid
food into small pieces not larger than ½ inch.
-When blending dry ingredients, add water to allow an easier and smoother
blending operation. Do not blend dry ingredients only.
-Ensure there is enough liquid in the container to at least cover the blades.
Immersion Blender_201627_IM_US_V4_170620.indd 9 6/20/17 10:14 AM

10
USING THE APPLIANCE
-To ensure even blending, release the low speed button Lo (4) to switch off the
appliance. Withdraw the blade attachment (11) from the container after a few
seconds and gently shake the container to mix the ingredients.
• If necessary, gently shake the container to re-distribute the ingredients.
Chopping
NOTE:
-Make sure the chopping assembly is correctly assembled ( Assembly).
-Cut any food into small chunks not larger than ½ inch.
-Do not operate the appliance when the chopping bowl (9) is empty.
-Do not process hard foods such as ice, coffee, cereal or chocolate in lumps in
the chopping bowl (9), as damage to the blades may result.
Whisking
NOTE:
-Make sure the whisk is always fully immersed to avoid splashing.
Mashing
NOTE:
-Peel or core any food and cut them into small chunks. Cut solid food into small
pieces not larger than ½ inch.
-Make sure the food to be mashed is soft enough to be processed.
-When mashing dry ingredients, add water to allow an easier and smoother
mashing operation. Do not mash dry ingredients only.
Immersion Blender_201627_IM_US_V4_170620.indd 10 6/20/17 10:14 AM