Farfi WE-N300 User manual

www.farfitech.com
User Manual
Farfi WE-N300
WiFi Rang Extender/Wireless Router/Access Point

QUICK INTALLITION GUIDE
1.Mode Rpeater(Using Your Smart-Phone)
-Make sure the route works normal.
- Plug it into an electrical outlet ( closest to your primary
router/WiFi access point ).
-Use your Smart-Phone to connect with the repeater (find
"FARFI" and connect with it).
-Visit the IP address 192.168.10.1 from a web browser.

-Log-in to the Admin Page by using "admin" for password, and
then it will scan the exsisited wireless signals.

-Choose your Router's/AP's network in the next window and
select it.
-Enter your Router's/AP's WIFI password in the
Password/WIFI Key/Security key column and click on "Apply"

-In the next window, you'll see the reboot process .(Leave the
device for 30 seconds to let it reboot itself).

-Open the list of available networks again using your
smartphone. Find out the New SSID "ChinaNet-Nytw-plus" and
connect with it using the same password as of your primary
router/AP.

-if the internet works, unplug FARIFI WE-N300 and plug it
halfway between your Router and the Device intended for the
internet usage/dead zones in your home where you were getting
low to no WIFI signals.
2.Repeater Mode(Using Your Laptop)
-Make sure the route works normal.
-Plug it into an electrical outlet ( closest to your primary
router/WiFi access point ).
-Use your Laptop to connect with the repeater (find "FARFI"
and connect with it in your wireless signal list).
-Visit the IP address 192.168.10.1 from a web browser.
-Log-in to the Admin Page by using "admin" for both the
username and password, and then it will scan the exsisited
wireless signals.

-Choose the Repeater Mode and and click to get in.The
repeater will scan the wireless signal arround it for about 30
seconds.

-Choose your Router's/AP's network in the next window and
select it.

-Enter your Router's/AP's WIFI password in the
Password/WIFI Key/Security key column and click on "Apply"

-In the next window, you'll see the reboot process .(Leave the
device for 30 seconds to let it reboot itself).

-Open the list of available networks again using your
smartphone. Find out the New SSID "ChinaNet-Nytw-plus" and
connect with it using the same password as of your primary
router/AP.