Fasel Elektronik FCU2000 Series User manual

Technical changes and errors excepted, illustration similar
Operating manual
Steam bath control
Series FCU2000/FCU3000/FCU4000
Doc-ID: B_FCUxxxx-Steam_EN
Version: V 2.03

2 Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000_ B_FCUxxxx-Steam_EN / Version V 2.03
FASEL GmbH
Germany

Table of Contents
Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000 B_FCUxxxx-Steam_EN / Version V 2.03 3
Table of Contents
1 Safety................................................................................................................................5
1.1 Explanations of symbols...............................................................................5
2.1 Demands on the operator and technicians...................................................5
1.2 Intended use .................................................................................................6
1.3 Changes and modifications ..........................................................................7
1.4 Operational safety and special dangers .......................................................7
2 Identification ....................................................................................................................8
2.1 Nameplate ....................................................................................................8
3 Technical Data:................................................................................................................8
4 Design and function........................................................................................................9
4.1 Function ........................................................................................................9
4.1.1 Steam ......................................................................................................9
4.1.2 Aroma ......................................................................................................9
4.1.3 Seat heating – (optional) .........................................................................9
4.2 Operating and display elements .................................................................10
4.2.1 FCUxxxx-Steam design and FCU-Steam design glass ........................10
4.2.2 Control keys steam bath control............................................................11
4.2.3 Explanation of the display .....................................................................13
4.3 Display symbols..........................................................................................14
5 Operation .......................................................................................................................15
5.1 Safety and instructions ...............................................................................15
5.2 Turn steam bath control on and off.............................................................16
5.2.1 Turn steam bath control on ...................................................................16
5.2.2 Turn steam bath control off ...................................................................16
5.2.3 Select or start the mode ........................................................................17
5.3 Adjust "Steam bath" mode..........................................................................17
5.4 Adjust the set point temperature, heating time, remaining heating time and
timer............................................................................................................18
5.4.1 Maximum allowed heating time.............................................................19
5.4.2 Maximum allowed heating time.............................................................20
5.5 Day timer ....................................................................................................20
5.5.1 Adjust the flavour feed...........................................................................21
5.6 Adjust the brightness of the cabin light (not for FCU2xxx) .........................22
5.7 Adjust the cabin fan speed (not for FCU2xxx)............................................22
5.8 Options menu .............................................................................................23
5.8.1 Adjust bench temperature – (optional) ..................................................23
5.8.2 RGB-LED brightness (only for FCU4xxx and menu "Pro") ...................23
5.8.3 Colour light mode (including parameter description).............................24
5.8.4 Colour light start (only for menu "Pro")..................................................26
6 "Basic settings" menu..................................................................................................28

Table of Contents
4 Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000_ B_FCUxxxx-Steam_EN / Version V 2.03
6.1 "Basic settings" - general ........................................................................... 28
6.1.1 Time and Weekday............................................................................... 28
6.1.2 Weekly timer ON/OFF (only for FCU4xxx) ........................................... 29
6.1.3 Program the weekly timer ..................................................................... 29
6.1.4 Select program (only for FCU4xxx) ...................................................... 31
6.1.5 Adjust display lighting (not for FCU2xxx).............................................. 32
6.1.6 Adjust display contrast (only for FCU4xxx)........................................... 32
6.1.7 Light settings (only for menu "Pro") ...................................................... 33
6.1.8 Fan settings (only for menu "Pro")........................................................ 34
6.2 "Basic settings" for options ........................................................................ 36
6.2.1 RGB-LED settings (only for FCU4xxx and menu "Pro")....................... 36
6.2.2 Colour light automatic (only for menu "Pro") ........................................ 37
6.2.3 Versions and data (only for menu "Pro") .............................................. 39
7 Options menu ............................................................................................................... 40
7.1 Small/professional...................................................................................... 40
7.2 Parental/Keypad lock ................................................................................. 40
7.3 Select language ......................................................................................... 40
8 Maintenance.................................................................................................................. 41
8.1 Cleaning..................................................................................................... 41
9 Malfunctions ................................................................................................................. 41
10 General Information ..................................................................................................... 41
10.1 Liability limitation........................................................................................ 41
10.2 Copyright.................................................................................................... 42
10.3 Scope of delivery ....................................................................................... 42
10.4 Spare parts ................................................................................................ 42
10.5 Customer service ....................................................................................... 42
10.6 43
10.7 Safety and instructions............................................................................... 43
10.8 Malfunction messages ............................................................................... 43
10.9 Acknowledge malfunction message .......................................................... 44
11 Decommissioning and disposal ................................................................................. 45
12 Setting value ................................................................................................................. 45
12.1 Setting value Steam bath........................................................................... 45
13 Declaration of Conformity ........................................................................................... 45
Index ...................................................................................................................................... 46

Safety
5 Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000_ B_FCUxxxx-Steam_EN / Version V 2.03
1 Safety
1.1 Explanations of symbols
Warnings Warnings in this operating manual are indicated through symbols. The instructions are
introduced through signal words, which express the degree of danger.
Follow these instructions strictly and take care to avoid accidents, personal injuries and
property damage.
DANGER!
…indicates an imminent dangerous situation, which could lead to loss of
life or cause serious injuries if not avoided.
WARNING!
…indicates a possible dangerous situation, which can be fatal or cause se-
rious injuries if not avoided.
CAUTION!
…indicates a possible dangerous situation, which could lead to small or
slight injuries if not avoided.
ATTENTION!
…indicates a possible dangerous situation, which could lead to property
damage if not avoided.
2.1 Demands on the operator and technicians
No special skills are required to operate the control unit.
The operating manual does not generally take the following into account:
Persons (including children)

Safety
6 Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000_ B_FCUxxxx-Steam_EN / Version V 2.03
– their physical, sensory or mental abilities or
– Lack of experience and / or knowledge which prevent the safe use of the device
without supervision or instruction.
Children playing with the device.
The operating instructions are to be read carefully before switching on the unit! To en-
sure safe operation and safe working practices you must comply with all the given
safety and handling instructions.
If you have any doubts, please contact your customer service.
Inadequate
qualifications
WARNING!
Danger caused by inadequate qualifications!
Improper handling could lead to considerable personal injuries
and damages to property.
Therefore:
The assembly, installation, commissioning, troubleshooting, mainte-
nance and repair work should be carried out only by qualified persons
unless otherwise mentioned.
Tips and
recommen-
dations
NOTE!
…highlights useful tips and recommendations as well as information for an
efficient and smooth operation.
1.2 Intended use
The FASEL Steam bath controls of the series FCU2000, FCU3000 and FCU4000 are
solely intended for operating and controlling steam bath cabins. The control units are
approved for private and commercial use.
Intended
use
CAUTION!
Danger caused by improper use!
Using the steam bath control for purposes other than the intended use
could lead to dangerous situations.
Therefore:
– Use the steam bath control only for the intended purpose.
– Operate the steam bath control only within the permissible ambient
temperature and humidity range. →See page 8.
– All the information in the operating and installation manual are to be
strictly followed.
– When not in use switch off the main switch (230V) or fuses
– Before switching on the steam bath control make sure that no ob-
jects are placed on the oven.

Safety
Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000 B_FCUxxxx-Steam_EN / Version V 2.03 7
Any damage claims which arise due to improper use are excluded. Only the user is re-
sponsible for damages caused by improper use.
1.3 Changes and modifications
Changes and modifications to the steam bath control or to the installation could lead to
unexpected dangers.
The written approval of the manufacturer must be obtained before making any technical
changes and enhancements to the steam bath control.
1.4 Operational safety and special dangers
Pay attention to the safety and warning notes in the following chapters of this manual to
minimize health hazards and to avoid dangerous situations.
The following instructions are to be adhered for your own safety and the safety of
the unit:
Electric poten-
tial
DANGER!
Danger to life due to electric potential!
Contact with live components can be fatal.
Damage of the insulation of the individual components can be dange-
rous to life.
Therefore:
– For switching off the mains, the power supply cable must be
equipped with a fuse with a contact opening width corresponding to
the requirements of the excess voltage category III for total discon-
nection.
– Disconnect the unit from the mains before carrying out any work on
it (switch off the fuse in the distribution box) and secure against re-
starting. Check for zero potential. The control device should be dis-
connected from the mains before opening the casing.
– In case of damage to the insulation, switch off the power supply im-
mediately and carry out the repair.
– Work on electrical unit should be carried out by certified electricians
only.
– Never bypass fuses or put them out of operation.
– While replacing fuses, pay attention to correct current specifications.
– Keep moisture away from live components, since it can lead to short
circuit.
WARNING!
If a short circuit occurs in a 230V/400V load, the relay contact can
be welded by the high short-circuit current. Is turned on before
removing the short circuit, the safety relay can be also welded.
This can lead to the continuous operation of the load. Turn off the
circuit breaker in the distribuition box. Send the unit back to the
factory for check/repair.

Identification
8 Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000_ B_FCUxxxx-Steam_EN / Version V 2.03
Improper
operation
WARNING!
Improper operation can result in serious injuries!
Therefore:
– read and note the operating manual.
2 Identification
2.1 Nameplate
The nameplate is located on the control unit on the left side:
2
1
8
5
3
4
7
6
Art Nr
Spg.:
Geräte Nr.: RoHS
conform
9
10 11
12
Fig.1 Control unit nameplate
1 Type designation
2 Company logo
3 Article number
4 Voltage and max. power
5 Device number
6 Barcode
7 Article number
8 Barcode article number
9 VDE mark (for devices that are approved by VDE)
10 RoHS marking
11 CE mark
12 Protection category
3 Technical Data:
Label Type
Series FCU2000 Series FCU3000 Series FCU4000
Ambient temperature 0°C to +40 °C
With protective coating -20°C to +40°C
Rel. humidity max. 80 % r.H., non condensing
Table 1: Technical Data

Design and function
Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000 B_FCUxxxx-Steam_EN / Version V 2.03 9
4 Design and function
4.1 Function
Depending on the model, the control unit is suitable for the following modes:
Steam
Aroma
Seat heating (optional)
4.1.1 Steam
In the "Steam" mode, the cabin is heated to the desired temperature (set point tempera-
ture) with the help of a vaporiser. In order to maintain the desired temperature in the
cabin, the control unit switches the vaporiser on and off.
As long as the vaporiser blows “steam” into the cabin, the status display "Steam gen-
erator" lights and the display shows "Heat-up phase". Once the desired temperature is
reached, this message disappears. The cabin is ready for use.
4.1.2 Aroma
With the help of the "Aroma" function, you can select the time intervals and the duration,
for which aromas will be blown into the cabin (blowing time). As long as aromas are
blown, the status display shows "Aroma".
4.1.3 Seat heating – (optional)
In the "Seat heating" function, a steam bath bench with seat heating is additionally
heated.
For this purpose, the "bench temperature", to which the bench should be heated, can be
adjusted. As long as the seat heating is working, the status display "Seat heating" lights
up.

Design and function
10 Operating manual Steam bath control Series FCU2000/FCU3000/FCU4000_ B_FCUxxxx-Steam_EN / Version V 2.03
4.2 Operating and display elements
4.2.1 FCUxxxx-Steam design and FCU-Steam design glass
Fig. 2: View: Operation FCUxxxx-Steam design and FCUxxxx Steam design glass
1 Status display "Steam generator"
2 Status display "Aroma"
3 Status display "Seat heating"
5 "Steam bath" key
6 "Aroma" key
7 "Bench" key
8 Control unit ON (only design)
9 Control unit OFF (only design)
10 "Set temperature" symbol
11 "Set flavour" symbol
12 "Set or remaining heating time" symbol
13 "Set start time" symbol”
14 Display
15 Cabin light" key
16 "Fan" key"
17 "Basic settings" key
18 Navigation keys
19 Cleaning light OFF (only design)
20 Cleaning light ON (only design)