Feasycom FSC-UP3311 UWB User manual

FSC-UP3311 Instruction Manual
1 www.feasycom.com
1. Brief introduction
FSC-UP3311 is a positioning tag based on UWB (Ultra Wideband) technology. The
main control chip adopts NRF52840 to realize the receiving and sending control of
UWB signals, and the positioning chip adopts DW3220, which can realize different
functions by burning different firmware.
At present, tags mainly support two functions.
Cooperate with mobile apps to achieve positioning, and cooperate with UWB base
stations to achieve UWB based TDOA (arrival) High precision positioning of time
difference. The tag has built-in acceleration sensor, which can intelligently switch
the positioning frequency when people are moving or being stationary, so as to
optimize power consumption.
FSC-UP3311 UWB

FSC-UP3311 Instruction Manual
2 www.feasycom.com
2. Basic parameter
Working parameter Description
Power supply mode product size
Operating voltage 2.4-3V
Battery capacity 1000mAh
Positioning distance ≥40m
Positioning accuracy ≤40cm
Working temperature -20~60℃
Product size 56×56×16mm
BLE parameter Description
Bluetooth version Bluetooth v5.2
Frequency 2.400 ~ 2.484GHz;
Transmit power -20 to +8 dBm
UWB parameter Description
protocol standard IEEE802.15.4-2015 IEEE802.15.4z
Frequency range Default
Support channel Channels 5 & 9 (6489.6MHz & 7987.2 MHz)
Communication rate Data rates of 850 kbps and 6.8 Mbps
Ranging mode TDoA and TWR

FSC-UP3311 Instruction Manual
3 www.feasycom.com
3. How to use it
3.1 Cooperate with mobile APP to achieve positioning.
3.1.1 Mobile phone connection mode (just use the tag) Install Feasycom FeasyUWB
app
Connect under FSC-UP3311 working condition.
When the following interface appears, it means the connection is successful.
It can be operated normally.
For specific operation, please refer to the instructions for the positioning of Beacon
by Feasycom UWB. mp4

FSC-UP3311 Instruction Manual
4 www.feasycom.com

FSC-UP3311 Instruction Manual
5 www.feasycom.com
3.2 Cooperate with the gateway to achieve positioning.
3.2.1 Indoor positioning mode (need to cooperate with UWB base station)
For specific operation, please refer to the instructions for indoor positioning of
Feasycom UWB. mp4.
4. Contact Information
Shenzhen Feasycom Co.,LTD
Address: Rm 508, Building A, Fenghuang Zhigu, No.50, Tiezai Road, Xixiang, Baoan
Dist, Shenzhen, 518100, China.
Telephone: [phone]
Support: [email protected]m
Sales Service: [e-mail]
Revision History
Version Changes Author
1.0 Initial Release luzhu