Feelworld TP2 User manual

DSLR CAMERA VERSION
SMARTPHONE+DSLR UNIVERSAL VERSION
PRODUCT INSTRUCTION
Smartphone/Tablet/DSLR Teleprompter
Patent product, Support wide angle lens
Patent No:202120181964.6

Contents
Packing list
Structure
Installation
App Download
Remote Controller

Packing List
TP2 DSLR Camera Version Packing List

Packing List
TP2A DSLR Camera + Smartphone Version Packing List

Structure

Structure

Installation
1. Tablet /Smartphone Prompting, DSLR Camera Recording
Supports below 8” for tablet
Take out a suitable lens Install the teleprompter on Install the phone/tablet clamp Push the “PUSH” to lock the
adapter to install on your the camera phone/tablet clamp
camera
Put the tablet on the tablet clamp Install the whole set on the tripod. Turn on the camera and make
The two cold shoe seat on the top of sure full screen
teleprompter can mount mircophone,
fill light, etc.

Installation
2. Tablet Prompting, Smartphone Recording
Choose a foam ring and Make sure put it well Install it on the back of Take out magnetic Put it on the middle of Can be sucked on the
put it into phone lens the teleprompter phone clamp the phone right or left side small
adapter iron piece to meet
horizontal shooting
Also can be sucked on the Intall the phone/tablet Push the PUSH to lock it Put the tablet on it Install the whole set on Turn on the recording
below small iron piece to clamp on the teleprompter the tripod. The two cold of the phone and make
meet vertical shooting seats on the top sure full screen
teleprompter can mount
mircophone, fill light, etc.

APP Download
iOS APP Download
iOS user search “FEELWORLD” in App Store to download
Android APP Download
Android user seach “ FEELWORLD” in Google Play to download
or scan the QR code to download

Remote Controller
Remote Button Instruction

Remote Controller
Remote Use Instruction
1. Power on: Keep press power button, until the lights on (about 2 seconds).
2. Power off: Keep press power button, until the lights off (about 5 seconds).
Notice: if power on without connect anything, it will power off after 5 minutes;
if connected the phone, it will power off after 30 minutes.
3. iOS Connect
Turn on the Bluetooth of the phone first, then turn on APP, and power on the remote controller last. LED lights on, auto
into paring mode, allowing the Bluetooth pair. The APP will show automatically connected to Feelworld-02, and the connection
is successful.
What can I do if my iPhone can not connect with remote controller?
1, pls go to bluetooth connection of your phone, check if remote controller had been connected by iphone；
2,then follow below steps to reconnect: 1) disconnect iphone Bluetooth , and switch off remote controller; 2) turn on iPhone
bluetooh, open app, and then switch on remote controller.
4. Android Connect
After power on, LED lights on, auto into paring mode. Turn on the Bluetooth of the phone, then turn on APP, will show the Bluetooth
connected automatically.

FAQ
FAQ: The remote controller can not connect the Android phone, how can I do?
1. Please check Location Permission on your phone, the connection need turn on permission.
2. Please check if the remote controller has been connected with your phone.
3. Please check if there is Bluetooth signal from remote controller.(check by other app to detect the Bluetooth )
4. Reboot the remote controller, reopen the app.
FAQ：The remote controller has been connected my Android phone, but it can not control the app.
1. Please close other app at background on your phone.
2. Please turn of Bluetooth on other phones on worksite, to make sure your Android phone is the only device to connect the remote
controller.
3. Please make sure that every time to connect with your phone is by app, not by Setting on you phone.
★As we are improving product features and product performance, so if there is any change on the
specification without prior notice.