PROAIM Ballpro CM-BLPR-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Ballpro Camera Sucon Car Mount w
Vibraon Isolator (CM-BLPR-01)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Sucon Car Mount
2 x Allen Bolts
(Size: 1/4”-20 x 1-1/4” & 2.5 x 6)
1 x Allen Key
(Size: 4mm,2.5mm)
DJI -QR Plate
P-QRG
Bolt Size
3/8”, 1/4”
4 x Yellow Dust Covers
Foam With Bag Packing

2
Ballpro Camera Setup
• Place your rst sucon cup in the selected
Posion from where you want to shoot.
• Similarly, remove rest of the yellow dust
covers of the sucon mount, as shown in the
image.
• Sucon Car Mount is now properly placed on
the car.
• Remove the yellow dust cover of Sucon Car
Mount.
• Press down the sucon cup and keep pushing
the pump to rmly x it on the surface. Repeat
this process for all the sucon cups.
Cauon: Recheck the Pump every 90 minutes. If
the red line is visible, Re-pump the cup without
losing the remaining vacuum ll the Red Line
disappears.
• Secure the movement of the ball joint with the
help of the Ratchet knob of the Telescopic
legs.

3
• Place the DJI-QR Plate on the Sucon Car
Mount.
NOTE: Two Ratchet knobs are provided in
Sucon Car Mount, with the help of the boom
knob, you can change the ball joint movement of
the telescopic legs.
• Follow the same process for other Allen CSK
Bolts.
• DJI-QR Plate is properly aached on the
Sucon Car Mount.
• Then insert Allen CSK bolts and ghten with
the help of 4mm Allen key.
• Then aach the (P-QRG) plate with Ronin
Gimble (Not-Included) and ghten it properly
with the help of a Screw Driver.

4
• Tighten the DJI-QR plate with the help of the
provided knob.
• Then aach the gimbal by sliding it from the
DJI-QR plate of the sucon car mount.
• Aach the camera (Not-Included) with Ronin
Gimbal (Not-Included), as shown in the image.
• Here is the proper assembled image of Ballpro
Camera Sucon Car Mount.
• Your Gimbal car sucon mount setup is now
ready to use.

5
YOUR PROAIM BALLPRO CAMERA SUCTION CAR MOUNT W VIBRATION ISOLATOR
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.