Ikan PT3500-P2P-TK User manual

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
PT3500-P2P-TK & PT3700-P2P-TK
Quick Start Guide
P2P Interview System with 2 x Teleprompters, Hard Cases, and HDMI Connection Cables
What’s Included
2 x Teleprompters
2 x SKB Rolling Hard Case
2 x 25 ft HDMI Cables

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
Step 1
Assembly
Place teleprompter base assembly on a flat surface.
You can position the glass at any angle you want, but the preferable
angle is 45°.
Step 2

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
Step 3
Slide the Camera Mount Assembly onto the 15mm Rods
The tripod mount has 3 sets of holes that allows you to mount the plate either
towards the front or rear to help balance the teleprompter better.
For larger cameras it is better to have the plate toward the rear, and for smaller
cameras towards the front.

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
Step 4
Attach camera to camera mount and slide to best position. Make sure all
thumbscrews are secure.
If you require the camera to be positioned higher, you can replace the 200mm
raiser bars in place of the pre-installed 130mm Rods
Use the included 5/32 Hex Key to remove and attach the raiser rods.
DSLR Camcorder

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
Step 5
Attach hood to glass frame using the integrated magnets. You can attach the
optional side flaps.

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
P2P Interview/Interviewee Setup
After both teleprompters have been setup and placed on tripods/pedestals, using one of the HDMI cables connect it to the camera on teleprompter 1
(interviewer) to the HDMI input port of monitor on teleprompter 2 (interviewee). Using the other HDMI cable connect it to the camera of teleprompter 2
(interviewee) to the HDMI input port of monitor on teleprompter 1 (interviewer).
** DO NOT THROW AWAY FOAM CASE **
Foam Case
To make your teleprompter more portable, we packed it in a reusable, high-quality foam.
The shape and size of the foam was designed to fit into Ikan’s PT-CASE which is included in this Travel Kit.

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
Monitor Ports
BNC – AV Composite Input
VGA – Video Graphics Array DE15 Connection
HDMI – High-Definition Multimedia Interface Input Connection
Power Port – 12-24v Input
HDMI – Switch HDMI input
VGA – Switch to VGA input
AV – Switch to composite BNC input
Flip – Toggle image flip
(Can be set to horizontal, vertical, or both via menu)
Up Arrow – Toggle up to adjust setting
Menu – Access to monitor settings
Down Arrow – Toggle down to adjust setting
Monitor Menu Settings
Video Config
Contrast (White Level)
Brightness (Black Level)
Tint (Chroma Hue)
Chroma (Chroma Saturation)
Sharpness (Detail)
RGB Setup – Manually configure RGB
Return
System Config
Menu Duration – Set duration of how long menu stays
on screen
Video Ratio – Set screen aspect ratio 16:9 or 4:3 (4:3 is
native resolution, 16:9 will create black bars)
Flip-H – Assign toggle button to flip image horizontally
Flip-V – Assign toggle button to flip image vertically
Reset – Factory reset
Return
PC Setup (Only available for VGA)
H-Position – Adjust horizontal position
V-Position – Adjust vertical position
Auto – Monitor automatically adjust position
Return
Exit
How to set-up FLIP button feature:
1. Press MENU button
2. Navigate to SYSTEM CONFIG.
3. Navigate to FLIP-V or FLIP-H
4. Change FLIP-V and/or FLIP-H to “ON”
5. Exit MENU
6. The FLIP button should now be activated and can be
pressed to mirror the image Horizontally or Vertically
7. When FLIP-H is ON, the image will flip Horizontally
8. When FLIP-V is ON, the image will flip Vertically
9. If both are ON, the FLIP button will toggle both
Horizontal and Vertical flip
HDMI

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
Supported Video Signals
HDMI
720x480i & 720x480p @ 59.94, 60 Hz
720x576i & 720x576p @ 50 Hz
1280x720p @ 50, 59.94, 60 Hz
1920x1080i @ 50, 59.94, 60 Hz
1920x1080psf @ 24, 25, 29.97, 30 Hz
1920x1080p @ 23.97, 24, 25, 29.94, 30, 50, 59.94, 60 Hz
Supported Video Signals
HDMI
720x480i & 720x480p @ 59.94, 60 Hz
720x576i & 720x576p @ 50 Hz
1280x720p @ 50, 59.94, 60 Hz
1920x1080i @ 50, 59.94, 60 Hz
1920x1080psf @ 24, 25, 29.97, 30 Hz
1920x1080p @ 23.97, 24, 25, 29.94, 30, 50, 59.94, 60 Hz
Specifications
PT3500-P2P-TK
15” Teleprompter System Travel Kits
PT3700-P2P-TK
17” Teleprompter System Travel Kits
Aspect Ratio 4:3
Brightness 350 cd/m2
Build Material Aluminum / Steel
Contrast Ratio 1000:1
Input Signal Composite BNC, VGA, HDMI
Input Voltage DC 12v / 4A
Mounting System VESA 100 x 100
Power Consumption 10W (each monitor)
Reading Range 20 ft.
Monitor Screen Size 17”
Resolution 1280 x 1024
Viewing Angle 160° (H) / 140° (V)
Shipping Weight 41 lbs (box 1); 41 lbs (box 2)
Shipping Dimensions 30” x 20” x 15” (box 1)
30” x 20” x 15” (box 2)
UPC 847983032549
Aspect Ratio 4:3
Brightness 350 cd/m2
Build Material Aluminum / Steel
Contrast Ratio 1000:1
Input Signal Composite BNC, VGA, HDMI
Input Voltage DC 12v / 4A
Mounting System VESA 100 x 100
Power Consumption 10W (each monitor)
Reading Range 17 ft.
Monitor Screen Size 15”
Resolution 1280 x 1024
Viewing Angle 160° (H) / 140° (V)
Shipping Weight 38 lbs (box 1); 38 lbs (box 2)
Shipping Dimensions 30” x 20” x 15” (box 1)
30” x 20” x 15” (box 2)
UPC 847983032525
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too

www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too
Learn More
More dynamic information at official website: www.ikancorp.com
Support
Contact email: [email protected]
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period is expired.
Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.
©2018 ikan Corporation. All rights reserved
www.ikancorp.com | 1.713.272.8822 | [email protected] because we’re filmmakers too