FELA SWITCH CASAMBI User manual

DECLARATION OF CONFORMITY
FELA GmbH hereby declares that the FELA SWITCH CASAMBI as the sta-
tionary 230 Volt wall switch and mobile battery switch comply with the
2014/53/EU directive.
FELA GmbH
Sturmbühlstraße 180 – 184
D-78054 Villingen-Schwenningen
Phone: [phone] | www.fela.de
OPERATION AND
INSTALLATION MANUAL
FELA SWITCH CASAMBI
stationary 230 Volt / mobile battery switch
ENVIRONMENTAL PROTECTION AND DISPOSAL
Old devices must not be disposed of with household waste. According
to EU regulations, electronic devices must be handed in at a designated
collection point at the end of their service life.
Use the country-specic return and collection systems for the disposal of
old electrical or electronic equipment and batteries.
Dispose of packaging materials in an environmentally friendly manner.
SAFETY INSTRUCTIONS
Danger of electric shock. Before working on the device, disconnect all as-
sociated circuit breakers (stationary 230 V wall switch).
Danger of explosion if incorrect batteries are used. Keep batteries out of
the reach of children. Swallowing a battery can have life-threatening con-
sequences (mobile battery version).
Protect the system from direct sunlight to avoid high temperatures. Avoid
using the switch in strongly heated rooms and, if possible, keep it away
from heat sources.
Keep the switch away from rooms with high humidity.
If the glass is damaged, e.g. due to a fall, the switch must not be used
again. There is a risk of injury. Damage to the glass can lead to false trig-
gering.
There is a risk of burns if the glass surface is too hot. Let the system cool
down before using the device again.
TECHNICAL SPECIFICATIONS
Stationary
230 Volt
Mobile
battery switch
Operating voltage 220 – 240 V 3,3 V button
cell (CR2430)
Frequency 50 Hz
Power consumption < 5 mA < 50 µA
Operating temperature 10 to 30° C
Storage temperature -20 °C to 60 °C
Signal transmission Bluetooth 4.0
Frequency 2,4 GHz
Max. transmission power 2,51 mW
Bluetooth range up to 30 m
Surface Glass in black, white, silver-grey
Dimension (L x W x H)
86 x 86 x 43,3
mm (surface
11,6 mm)
89 x 89 x 9,8
mm
Wallpaper compensation max. 1 mm -
You will nd comprehensive operating and installation instructions on our
website at www.fela.de/downloads-2

CASAMBI APP
2. Initialize / congure switches
By pressing any key of the FELA SWITCH, the automatic detec-
tion in the app is triggered.
By tapping on „Add to ...“ the desired network can be selected.
1b. Inserting the battery (mobile battery switch)
Open the battery compartment carefully by turning it coun-
terclockwise. Insert a button cell type CR2430 with the positive
terminal pointing towards the battery cover. Turn battery cover
clockwise to close. It may only be closed with the battery inser-
ted.
1a. Mounting the switch (stationary 230V)
Connect the ush-mounted insert (power supply unit) and
then mount it in the correct position in the existing installation
(socket). Insert the glass front panel, it must be clicked into place
with an audible snap.
1a. Installing the switch (stationary 230V)
The power section must be connected as shown (L/N). For this
purpose, the connecting cables must be skinned approx. 6 - 8
mm. Then adjust the power section appropriately and x it using
the mounting screws of the ush-mounted insert.

CASAMBI APP
2. Initialize / congure switches
By pressing any key of the FELA SWITCH, the automatic detec-
tion in the app is triggered.
By tapping on „Add to ...“ the desired network can be selected.
1b. Inserting the battery (mobile battery switch)
Open the battery compartment carefully by turning it coun-
terclockwise. Insert a button cell type CR2430 with the positive
terminal pointing towards the battery cover. Turn battery cover
clockwise to close. It may only be closed with the battery inser-
ted.
1a. Mounting the switch (stationary 230V)
Connect the ush-mounted insert (power supply unit) and
then mount it in the correct position in the existing installation
(socket). Insert the glass front panel, it must be clicked into place
with an audible snap.
1a. Installing the switch (stationary 230V)
The power section must be connected as shown (L/N). For this
purpose, the connecting cables must be skinned approx. 6 - 8
mm. Then adjust the power section appropriately and x it using
the mounting screws of the ush-mounted insert.

CASAMBI APP
2. Initialize / congure switches
By pressing any key of the FELA SWITCH, the automatic detec-
tion in the app is triggered.
By tapping on „Add to ...“ the desired network can be selected.
1b. Inserting the battery (mobile battery switch)
Open the battery compartment carefully by turning it coun-
terclockwise. Insert a button cell type CR2430 with the positive
terminal pointing towards the battery cover. Turn battery cover
clockwise to close. It may only be closed with the battery inser-
ted.
1a. Mounting the switch (stationary 230V)
Connect the ush-mounted insert (power supply unit) and
then mount it in the correct position in the existing installation
(socket). Insert the glass front panel, it must be clicked into place
with an audible snap.
1a. Installing the switch (stationary 230V)
The power section must be connected as shown (L/N). For this
purpose, the connecting cables must be skinned approx. 6 - 8
mm. Then adjust the power section appropriately and x it using
the mounting screws of the ush-mounted insert.

CASAMBI APP
2. Initialize / congure switches
By pressing any key of the FELA SWITCH, the automatic detec-
tion in the app is triggered.
By tapping on „Add to ...“ the desired network can be selected.
1b. Inserting the battery (mobile battery switch)
Open the battery compartment carefully by turning it coun-
terclockwise. Insert a button cell type CR2430 with the positive
terminal pointing towards the battery cover. Turn battery cover
clockwise to close. It may only be closed with the battery inser-
ted.
1a. Mounting the switch (stationary 230V)
Connect the ush-mounted insert (power supply unit) and
then mount it in the correct position in the existing installation
(socket). Insert the glass front panel, it must be clicked into place
with an audible snap.
1a. Installing the switch (stationary 230V)
The power section must be connected as shown (L/N). For this
purpose, the connecting cables must be skinned approx. 6 - 8
mm. Then adjust the power section appropriately and x it using
the mounting screws of the ush-mounted insert.

DECLARATION OF CONFORMITY
FELA GmbH hereby declares that the FELA SWITCH CASAMBI as the sta-
tionary 230 Volt wall switch and mobile battery switch comply with the
2014/53/EU directive.
FELA GmbH
Sturmbühlstraße 180 – 184
D-78054 Villingen-Schwenningen
Phone: [phone] | www.fela.de
OPERATION AND
INSTALLATION MANUAL
FELA SWITCH CASAMBI
stationary 230 Volt / mobile battery switch
ENVIRONMENTAL PROTECTION AND DISPOSAL
Old devices must not be disposed of with household waste. According
to EU regulations, electronic devices must be handed in at a designated
collection point at the end of their service life.
Use the country-specic return and collection systems for the disposal of
old electrical or electronic equipment and batteries.
Dispose of packaging materials in an environmentally friendly manner.
SAFETY INSTRUCTIONS
Danger of electric shock. Before working on the device, disconnect all as-
sociated circuit breakers (stationary 230 V wall switch).
Danger of explosion if incorrect batteries are used. Keep batteries out of
the reach of children. Swallowing a battery can have life-threatening con-
sequences (mobile battery version).
Protect the system from direct sunlight to avoid high temperatures. Avoid
using the switch in strongly heated rooms and, if possible, keep it away
from heat sources.
Keep the switch away from rooms with high humidity.
If the glass is damaged, e.g. due to a fall, the switch must not be used
again. There is a risk of injury. Damage to the glass can lead to false trig-
gering.
There is a risk of burns if the glass surface is too hot. Let the system cool
down before using the device again.
TECHNICAL SPECIFICATIONS
Stationary
230 Volt
Mobile
battery switch
Operating voltage 220 – 240 V 3,3 V button
cell (CR2430)
Frequency 50 Hz
Power consumption < 5 mA < 50 µA
Operating temperature 10 to 30° C
Storage temperature -20 °C to 60 °C
Signal transmission Bluetooth 4.0
Frequency 2,4 GHz
Max. transmission power 2,51 mW
Bluetooth range up to 30 m
Surface Glass in black, white, silver-grey
Dimension (L x W x H)
86 x 86 x 43,3
mm (surface
11,6 mm)
89 x 89 x 9,8
mm
Wallpaper compensation max. 1 mm -
You will nd comprehensive operating and installation instructions on our
website at www.fela.de/downloads-2

DECLARATION OF CONFORMITY
FELA GmbH hereby declares that the FELA SWITCH CASAMBI as the sta-
tionary 230 Volt wall switch and mobile battery switch comply with the
2014/53/EU directive.
FELA GmbH
Sturmbühlstraße 180 – 184
D-78054 Villingen-Schwenningen
Phone: [phone] | www.fela.de
OPERATION AND
INSTALLATION MANUAL
FELA SWITCH CASAMBI
stationary 230 Volt / mobile battery switch
ENVIRONMENTAL PROTECTION AND DISPOSAL
Old devices must not be disposed of with household waste. According
to EU regulations, electronic devices must be handed in at a designated
collection point at the end of their service life.
Use the country-specic return and collection systems for the disposal of
old electrical or electronic equipment and batteries.
Dispose of packaging materials in an environmentally friendly manner.
SAFETY INSTRUCTIONS
Danger of electric shock. Before working on the device, disconnect all as-
sociated circuit breakers (stationary 230 V wall switch).
Danger of explosion if incorrect batteries are used. Keep batteries out of
the reach of children. Swallowing a battery can have life-threatening con-
sequences (mobile battery version).
Protect the system from direct sunlight to avoid high temperatures. Avoid
using the switch in strongly heated rooms and, if possible, keep it away
from heat sources.
Keep the switch away from rooms with high humidity.
If the glass is damaged, e.g. due to a fall, the switch must not be used
again. There is a risk of injury. Damage to the glass can lead to false trig-
gering.
There is a risk of burns if the glass surface is too hot. Let the system cool
down before using the device again.
TECHNICAL SPECIFICATIONS
Stationary
230 Volt
Mobile
battery switch
Operating voltage 220 – 240 V 3,3 V button
cell (CR2430)
Frequency 50 Hz
Power consumption < 5 mA < 50 µA
Operating temperature 10 to 30° C
Storage temperature -20 °C to 60 °C
Signal transmission Bluetooth 4.0
Frequency 2,4 GHz
Max. transmission power 2,51 mW
Bluetooth range up to 30 m
Surface Glass in black, white, silver-grey
Dimension (L x W x H)
86 x 86 x 43,3
mm (surface
11,6 mm)
89 x 89 x 9,8
mm
Wallpaper compensation max. 1 mm -
You will nd comprehensive operating and installation instructions on our
website at www.fela.de/downloads-2

DECLARATION OF CONFORMITY
FELA GmbH hereby declares that the FELA SWITCH CASAMBI as the sta-
tionary 230 Volt wall switch and mobile battery switch comply with the
2014/53/EU directive.
FELA GmbH
Sturmbühlstraße 180 – 184
D-78054 Villingen-Schwenningen
Phone: [phone] | www.fela.de
OPERATION AND
INSTALLATION MANUAL
FELA SWITCH CASAMBI
stationary 230 Volt / mobile battery switch
ENVIRONMENTAL PROTECTION AND DISPOSAL
Old devices must not be disposed of with household waste. According
to EU regulations, electronic devices must be handed in at a designated
collection point at the end of their service life.
Use the country-specic return and collection systems for the disposal of
old electrical or electronic equipment and batteries.
Dispose of packaging materials in an environmentally friendly manner.
SAFETY INSTRUCTIONS
Danger of electric shock. Before working on the device, disconnect all as-
sociated circuit breakers (stationary 230 V wall switch).
Danger of explosion if incorrect batteries are used. Keep batteries out of
the reach of children. Swallowing a battery can have life-threatening con-
sequences (mobile battery version).
Protect the system from direct sunlight to avoid high temperatures. Avoid
using the switch in strongly heated rooms and, if possible, keep it away
from heat sources.
Keep the switch away from rooms with high humidity.
If the glass is damaged, e.g. due to a fall, the switch must not be used
again. There is a risk of injury. Damage to the glass can lead to false trig-
gering.
There is a risk of burns if the glass surface is too hot. Let the system cool
down before using the device again.
TECHNICAL SPECIFICATIONS
Stationary
230 Volt
Mobile
battery switch
Operating voltage 220 – 240 V 3,3 V button
cell (CR2430)
Frequency 50 Hz
Power consumption < 5 mA < 50 µA
Operating temperature 10 to 30° C
Storage temperature -20 °C to 60 °C
Signal transmission Bluetooth 4.0
Frequency 2,4 GHz
Max. transmission power 2,51 mW
Bluetooth range up to 30 m
Surface Glass in black, white, silver-grey
Dimension (L x W x H)
86 x 86 x 43,3
mm (surface
11,6 mm)
89 x 89 x 9,8
mm
Wallpaper compensation max. 1 mm -
You will nd comprehensive operating and installation instructions on our
website at www.fela.de/downloads-2