felton industries 3TGS3 User manual

DOUBLE PLANK BACK REST SPECTATOR
SEATING
PRODUCT CODE (3TGS3)
PART No. PART NAME QTY
3TGS1 MAIN FRAME 4
3TGS2 BACK REST FLAT BAR 1
3TGS3 4000 mm.-BACK REST PLANK 1
3TGS4 4000mm.-SEATING PLANK 6
3TGS5 M10x35mm. CUP HEAD BOLT 4
3TGS6 M6x25 mm. HEX. HEAD BOLT 104
3TGS7 M6 LOCKNUT 104
3TGS8 M10 LOCKNUT 4
3TGS9 M10 PLAIN WASHER 4
[1]
WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE DOUBLE PLANK BACK REST SPECTATOR SEATING.
Make sure to wear protecve gloves and foot protecon when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This acvity requires two o more people as liing is involved. Please ensure bolts are only nger ghtened during the assembling
process for exibility in lining up components. Securely ghten the bolts before anchoring the product to the ground.
1
1
[3TGS1]
[3TSG4] [3TGS3]
[3TGS7x4]
[3TGS1]
[3TGS1]
[3TGS2]
3
1
1
2
[3TGS6x4]
A. Have two external frames
[3TGS1] in place, with lugs
facing inwards and secure them
to the back and front seang
planks [3TGS4], by using hexag-
onal head bolts [3TGS6] and
locknuts [3TGS7] -nger ght-
en .
B. STEP 2: Install the two central
frames [3TGS1], and secure
them to the seang planks
[3TGS4], with hexagonal head
bolts [3TGS6] and locknuts
[3TGS7] - nger ghten
(STEP2).
[3TGS5/6]
[3TSG7/8] [3TGS9]
[3TGS7x4]
[3TGS1]
A. Install the rest of the
seang planks [3TGS4]
on the back, front and
centre as per the illus-
trated sequence. Make
sure to secure the
seang planks [3TGS4]
to the frames, by using
hexagonal head bolts
[3TGS6] and locknuts
[3TGS7] -nger ghten.
4
6
5
[3TGS6x4]
[3TGS1] [3TGS1]
[3TGS1]
3
[3TGS7x4]
[3TGS6x4]
2
2

[1]
WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE DOUBLE PLANK BACK REST SPECTATOR SEATING.
Make sure to wear protecve gloves and foot protecon when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This acvity requires two o more people as liing is involved. Please ensure bolts are only nger ghtened during the assembling
process for exibility in lining up components. Securely ghten the bolts before anchoring the product to the ground.
A. Tight the whole fasteners with a spanner and/or an appropriate tool. Adjust the whole unit as necessary.
B. Fix the spectator seating to the ground, by installing dyna-bolts onto each frame lug.
3
2
[3TGS6x4]
4
A. Have the back rest at bar [3TGS2] in place and secure it to the frame back rest plates [3TGS1], by using cup head bolts [3TGS5] and locknuts [3TGS8] -
nger ghten.
B. Install the back rest plank [3TGS3] on to the frames as shown and secure them by using hexagonal head bolts [3TGS6] and locknuts [3TGS7]. - nger ght-
en.
[3TSG1]
[3TGS7x4]
[3TGS8x1]
[3TGS9x1]
[3TGS5x1]
Frame lug