WARNING: READ THE ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE PARK SETTING WITH BACK REST.
Make sure to wear protecve gloves and foot protecon when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This acvity requires two o more people as liing is involved. Please ensure bolts are only nger ghtened during the assembly pro-
cess for exibility in lining up components. Securely ghten the bolts before anchoring the product to the ground.
ASSEMBLY INSTRUCTIONS
PARK SETTING WITH BACK REST
(Code No. FELPSBR)
ITEM DESCRIPTION QTY
PR1 MAIN FRAME 2
PR2 SEAT / TABLE PLANK –1800mm. 5
PR3 M6x25 mm. HEXAGONAL HEAD BOLT 48
PR4 M6 LOCKNUT 48
PR5 BACK REST PLANK 2
PR1 PR2 PR3
PR4
1
Lay 3 table planks (PR2) upside down on a at surface, making sure they are
level at both ends.
Bolt the two main frames (PR1) to the table planks (PR2), frame tags facing
inward and upside bolts as illustrated.
2
Turn the enre assembly up and aach two seat planks (PR2) to the main frame xing
plates (PR1), by using hexagonal head bolts (PR3) and locknuts (PR4). Make sure the
hexagonal head bolts are installed upwards as illustrated.
34
Aach the back rest planks (PR5) to the main frame top plate (PR1) with hexagonal
head bolts (PR3) and locknuts (PR4) as illustrated. Make sure the hexagonal head bolts
are installed facing inwards as illustrated.
[PR4x2]
[PR3x2]
PR5
[PR2]
[PR1]
[PR1]
[PR1]
[PR4x4]
[PR5x4]
[PR5]
Thank you for purchasing our high quality products. The Park Seng with Back Rest has been manufactured with cered materials to achieve high reliability and minimum
maintenance. It is our commitment to provide cost eecve soluons for outdoor applicaons.
[PR3x4]
[PR4x2]
