felton industries FEL4PPS User manual

WARNING: READ THE ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE 4 SIDED PEDESTAL PARK SETTING.
Make sure to wear protecve gloves and foot protecon when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This acvity requires two o more people as liing is involved. Please ensure all bolts are only nger-ghtened during the assembling
process for exibility in lining up components. Securely ghten the bolts before anchoring the product to the ground.
ITEM PART COMPONENT DESCRIPTION QTY
FE4P1 CENTRAL UPRIGHT 1
FE4P2 SEATING FRAME / LEGS 4
FE4P3 HORIZONTAL SEAT BRACE—SHORT FIXING PLATES 2
FE4P4 HORIZONTAL SEAT BRACE—LONG FIXING PLATES 2
FE4P5 TABLE FRAME 1
FE4P6 1000 mm.—TABLE PLANK 4
FE4P7 900 mm.—SEATING PLANK 4
Thank you for purchasing our high quality products. The Interacve 4 Sided pedestal Park Seng has been manufactured with cered materials, to achieve high reliability and minimum mainte-
nance. It is our commitment to provide you cost eecve soluons for outdoor applicaons.
FE4P1 FE4P5
1
P1
FE4P 2 FE4P 3/4 FE4P 6/7 FE4P9/11/12 FE4P16/17
FE4P13/14/15
ITEM PART FASTENER DESCRIPTION QTY
FE4P9 M6 x 25mm. HEXAG. HEAD BOLT 64
FE4P10 M10x120mm. HEX. HEAD BOLT 2
FE4P11 M10x110mm. HEXAG. HEAD BOLT 8
FE4P12 M12x100 mm. HEX. HEAD BOLT 2
FE4P13 M6 LOCKNUT 64
FE4P14 M10 LOCKNUT 16
FE4P15 M12 LOCKNUT 4
FE4P16 M10 PLAIN WASHER 24
FE4P17 M12 PLAIN WASHER 4
Lay the 4 Table planks [FE4P6] upside down and ush ends. Place the table
frame [FE4P5] on top the table planks and aach it with hex. head bolts
[FE4P9] and locknuts [FE4P9] - Finger ghten.
Lay a seat plank [FE4P2] upside down on a at surface. Have the
seat frame [FE4P2] on top and aach it to the seat plank, by using
hex. head bolts [FE4P9] and locknuts [FE4P13] - Finger ghten.
[FE4P9x4]
[FE4P13x4]
[FE4P5]
[FE4P6]
[FE4P9x4]
[FE4P2]
[FE4P13x4]
[FE4P7]
2

P2
Secure the 4 assembled components achieved in the step 3, to the central post
[FE4P1], by using hex. head bolts [FE4P10], locknuts [FE4P14] and washers
[FE4P16] - Finger ghten.
WARNING: READ THE ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE 4 SIDED PEDESTAL PARK SETTING.
Make sure to wear protecve gloves and foot protecon when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This acvity requires two o more people as liing is involved. Please ensure all bolts are only nger-ghtened during the assembling
process for exibility in lining up components. Securely ghten the bolts before anchoring the product to the ground.
4
[FE4P14x4]
[FE4P10x2]
3
56
Connect the table bench assembly to the rest of the 4
pedestal park seng, as illustrated. Secure the table frame
[FE4P5] to central post xing plates, by using hexagonal
head bolts [FE4P12], locknuts [FE4P15] and washers
[FE4P17]- Finger ghten.
[FE4P12x2] [FE4P17x4]
[FE4P15x2]
Tight all the bolts with spanner and/or proper tools as necessary.
Fix the 4 sided pedestal park seng to the ground with dyna-bolts.
[FE4P16x4]
Secure the 4 crossbars [FE4P3/4] to a seat leg assembly achieved in the Step 2
correspondingly and secure it with hex. head bolts [FE4P11], locknuts [FE4P14] and
washers [FE4P16] - Finger ghten.
[FE4P16x4] [FE4P11x2]
[FE4P3/4]
[FE4P14x2]
[FE4P1]
[FE4P4]
[FE4P3]